We never sell your data to third parties
Image for Illustration purposes only. Actual product may vary
Carter CNBE-104-SB 3.25" Needle Cam Follower Eccentric, Sealed, Hex Eccentric, Sealed, Hex
MODEL CNBE-104-SB
Contact supplier for technical support on: 616 842 8760
$226.99 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable: See conditions
Basic dynamic rating (lbf)
15720
Bushing diameter
1.750
Bushing length
1.250
Eccentric offset
0.060
Limiting speed (RPM)
880
Lube fitting size
1/4
Max static capacity (lbf)
24910
Min boss diameter
1 3/4
Mounting bore diameter
1.753
Oil hole center
5/8
Oil hole diameter
1/8
Recom torque (in/pound)
1725
Roller O.D.
3.250
Roller width
1.750
Stud length
2.500
Stud Length
2.5
Thread class 2A
1 1/4-12
Thread Length
1 1/4
Standard Needle Bearing Cam Followers and Cam Yoke Rollers
Carter Standard Type bearings are easily mounted and ideally suited for many cam or track roller applications with moderate loading and shock. The bearings are sealed to help prevent contamination and retain lubrication. This Standard Type is recommended for applications where the stud hole can be accurately machined to within +.0000" and -.0005". For other applications where these tolerances cannot be held to these limits, the Eccentric Type is recommended.
The outer race on Carter Cam Followers is high carbon chrome bearing steel thrrough-hardened and ground. The studs and inner races are low carbon alloy steel carburized and induction hardened. A zone hardened raceway leaves the shank end ductile. The needle rollers are high carbon chrome bearing steel through-hardened and ground.
TYPES
Sealed with Slotted Head
Type CNB-S is the Standard Type having a slotted head which normally supplies sufficient turning ability for installing this type of bearing.
Sealed with Hexagonal Socket
Type CNB-SB provides the ease of installing with a hex wrench which may be desired particularly on the larger sizes.
Sealed with Crowned O.D.
Type CCNB-S is recommended wherever variations in dimensions of alignment of the tracks or cam might cause excessive angular loading. It reduces thrust on the rollers and wear, and aids reliability.
Eccentric Stud
#2249626
Brand
McGill Bearing
Model
CFE 3 1/4 SB
#2788708
Brand
Smith Bearings
Model
CR-3-1/4-XBE
Item must be unused.
Item must be in it's original package.
Restocking, shipping and handling fees may applied to any return with this manufacturer.
For more information please consult https://www.mrosupply.com/page/returnwarranty-policy/