We never sell your data to third parties
Image for Illustration purposes only. Actual product may vary
NTN UELPL-1 is a 2-bolt low-profile pillow block with an eccentric collar locking mechanism and a cast iron housing. The unit has a 1 inch bore and is designed for light to moderate industrial applications such as conveyors and fans.
MODEL UELPL-1
$93.05 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable:No
A (in)
1.5000
B1
1.7480 in
Bearing Number
A-UEL205-100D1
Bearing number
A-UEL205-100D1
Bearing Type
Ball Bearing
d (in)
1
Dynamic Load Rating
3150 lbf
Dynamic load rating
3150 lbf
End Type
Open
End type
Open
F (in)
0.1772
Finish/Coating
Black oxide
H (in)
1-5/16
H1
0.5938 in
H2
2.6875 in
Housing Construction
1 Piece
Housing construction
1 Piece
Housing Material
Cast Iron
Housing material
Cast iron
Housing Number
PL205D1V50
I.D.
1 in
J (in)
4-1/8
L (in)
5.5000
L1
1.6563 in
Locking Device
Eccentric Locking Collar
Locking device
Eccentric locking collar
Lubrication
Relubricatable
Max Rotational Speed
5900 RPM
Max Tightening Torque
69 lb·in
N (in)
0.4375
N1
0.8125 in
O.D.
2.0472 in
Operating Temperature Range
-40 to 250 °F
Operating temperature range
-40 to 250 ºF
Performance
Light Duty
S
0.6890 in
Seal Material
Nitrile Rubber
Seal material
Nitrile rubber
Seal Type
Contact
Seal type
Contact
Static Load Rating
1760 lbf
Static load rating
1760 lbf
Type
Pillow Block Unit
Width
1.748 in
Technical Specifications
Type | Pillow Block Unit |
|---|---|
Bearing Type | Ball Bearing |
Locking Device | Eccentric Locking Collar |
Seal Type | Contact |
Seal Material | Nitrile Rubber |
Bearing Number | A-UEL205-100D1 |
Housing Number | PL205D1V50 |
Housing Material | Cast Iron |
Housing Construction | 1 Piece |
End Type | Open |
Finish/Coating | Black Oxide |
Performance | Light Duty |
Dynamic Load Rating | 3150 lbf14000 N14.00 kN |
Static Load Rating | 1760 lbf7850 N7.85 kN |
Max Tightening Torque | 69 lb·in |
Rotational Speed [Max] | 5900 RPM |
Operating Temperature Range | -40 to 250 F-40 to 120 C |
Dimensional Specifications
| |
d | 1 in25.400 mm |
|---|---|
J | 4.125 in104.8 mm |
L | 5.5000 in139.7 mm |
A | 1.5000 in38.1 mm |
H | 1.3125 in33.3 mm |
H1 | 0.5938 in15.1 mm |
H2 | 2.6875 in68.3 mm |
N | 0.4375 in11.1 mm |
N1 | 0.8125 in20.6 mm |
L1 | 1.6563 in42.1 mm |
B1 | 1.7480 in44.400 mm |
S | 0.6890 in17.500 mm |
F | 0.1772 in4.500 mm |
How do I choose the right type of bearing for my application?
Start with the load and how it’s applied. You need to know if you’re dealing with radial loads, axial loads, or a mix of both. Then look at speed, operating environment, and space constraints. For example, ball bearings are great for high speed and lighter loads, while roller bearings handle heavier loads but usually at lower speeds. If there’s contamination, moisture, or heat involved, you may need sealed bearings or specific materials. In most cases, the right choice comes down to matching load type, speed, and environment to the bearing design.
#129440
Brand
Dodge
Model
P2B-SXRB-100
#2272137
Brand
Browning
Model
767363
#497683
Brand
Link-Belt
Model
10436947
| Brand | MRO Supply |
| Model | 0403-10-12 |
| Brand | Rossi |
| Model | R000162407 |
| Brand | Nachi Bearing |
| Model | 6206C3 |
