We never sell your data to third parties
NTN UCP207-105D1 is a 2-bolt cast-iron pillow block with a set screw locking insert. Bore is 1-5/16 in (33.34 mm). Designed for general industrial conveyor and machinery applications.
MODEL UCP207-105D1
$85.17 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable:No
I.D.
1.3125 in
O.D.
2.8346 in
Width
1.689 in
Technical Specifications
| Type | Pillow Block Unit |
|---|---|
| Bearing Type | Ball Bearing |
| Locking Device | Set Screw |
| Seal Type | Contact |
| Seal Material | Nitrile Rubber |
| Bearing Number | UC207-105D1 |
| Housing Number | P207D1 |
| Housing Material | Cast Iron |
| Housing Construction | 1 Piece |
| Performance | Light Duty |
| End Type | Open |
| Dynamic Load Rating | 5800 lbf25700 N25.70 kN |
| Static Load Rating | 3450 lbf15300 N15.30 kN |
| Rotational Speed [Max] | 4200 RPM |
| Operating Temperature Range | -40 to 250 F-40 to 120 C |
Dimensional Specifications
| |
| d | 1.3125 in33.338 mm |
|---|---|
| J | 5.0000 in127.0 mm |
| L | 6.5625 in167.0 mm |
| A | 1.8750 in48.0 mm |
| H | 1.8750 in47.6 mm |
| H1 | 0.7187 in18.0 mm |
| H2 | 3.6562 in93.0 mm |
| L1 | 2.1250 in54.0 mm |
| N | 0.6562 in17.0 mm |
| N1 | 0.7812 in20.0 mm |
| B | 1.6890 in42.900 mm |
| S | 0.6890 in17.500 mm |
| F | 0.1811 in4.600 mm |
How do I choose the right type of bearing for my application?
Start with the load and how it’s applied. You need to know if you’re dealing with radial loads, axial loads, or a mix of both. Then look at speed, operating environment, and space constraints. For example, ball bearings are great for high speed and lighter loads, while roller bearings handle heavier loads but usually at lower speeds. If there’s contamination, moisture, or heat involved, you may need sealed bearings or specific materials. In most cases, the right choice comes down to matching load type, speed, and environment to the bearing design.
| Brand | Precision Twist Drill |
| Model | 5997116 |
