We never sell your data to third parties
Image for Illustration purposes only. Actual product may vary
The NTN CM-UCP205D1 is a cast iron dust cover accessory designed for UCP205 series mounted pillow block units. It features a closed end configuration with set screw locking and provides protection against contaminants in industrial conveyor and machinery applications.
MODEL CM-UCP205D1
$82.18 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable:No
A (in)
1.5000
A5
2.7500 in
B (in)
1.3425
Bearing Number
UC205D1
Bearing number
UC205D1
Bearing Type
Ball Bearing
d (in)
0.9843
Dynamic Load Rating
3150 lbf
Dynamic load rating
3150 lbf
End Type
One Open, One Closed
End type
One open, one closed
F (in)
0.1772
H (in)
1.4375
H1
0.5937 in
H3
3.0000 in
Housing Construction
1 Piece
Housing construction
1 Piece
Housing Number
CM-P205D1
I.D.
0.9843 in
J (in)
4.1250
L (in)
5.5000
L1
1.6562 in
Locking Device
Set Screw
Locking device
Set screw
Lubrication
Relubricatable
Max Rotational Speed
5900 RPM
N (in)
0.5000
N1
0.6250 in
O.D.
2.0472 in
Operating Temperature Range
-40 to 250 °F
Operating temperature range
-40 to 250 ºF
Performance
Light Duty
S
0.5630 in
Seal Material
Nitrile Rubber
Seal material
Nitrile rubber
Seal Type
Contact
Seal type
Contact
Static Load Rating
1760 lbf
Static load rating
1760 lbf
Type
Pillow Block Unit
Width
1.3386 in
Technical Specifications
| Type | Pillow Block Unit |
|---|---|
| Bearing Type | Ball Bearing |
| Locking Device | Set Screw |
| Seal Type | Contact |
| Seal Material | Nitrile Rubber |
| Bearing Number | UC205D1 |
| Housing Number | P205D1 |
| Housing Construction | 1 Piece |
| End Type | One Open, One Closed |
| Performance | Light Duty |
| Dynamic Load Rating | 3150 lbf14000 N14.00 kN |
| Static Load Rating | 1760 lbf7850 N7.85 kN |
| Rotational Speed [Max] | 5900 RPM |
| Operating Temperature Range | -40 to 250 F-40 to 120 C |
Dimensional Specifications
| |
| d | 0.9843 in25.000 mm |
|---|---|
| J | 4.1250 in105.0 mm |
| L | 5.5000 in140.0 mm |
| A | 1.5000 in38.0 mm |
| A5 | 2.7500 in70.000 mm |
| H | 1.4375 in36.5 mm |
| H1 | 0.5937 in15.0 mm |
| H3 | 3.0000 in76.0 mm |
| L1 | 1.6562 in42.0 mm |
| N | 0.5000 in13.0 mm |
| N1 | 0.6250 in16.0 mm |
| B | 1.3425 in34.100 mm |
| S | 0.5630 in14.300 mm |
| F | 0.1772 in4.500 mm |
How do I choose the right type of bearing for my application?
Start with the load and how it’s applied. You need to know if you’re dealing with radial loads, axial loads, or a mix of both. Then look at speed, operating environment, and space constraints. For example, ball bearings are great for high speed and lighter loads, while roller bearings handle heavier loads but usually at lower speeds. If there’s contamination, moisture, or heat involved, you may need sealed bearings or specific materials. In most cases, the right choice comes down to matching load type, speed, and environment to the bearing design.
| Brand | Fasco |
| Model | D1107 |
| Brand | SKF Bearing |
| Model | N 212 ECM |
