We never sell your data to third parties
Image for Illustration purposes only. Actual product may vary
BUNTING LT324832 2 Bore 2 Bolt Flanged Mount Lube Align 2 Bolt Flanged Mount Lube Align
MODEL LT324832
Contact supplier for technical support on: 888 286 8464
$99.17 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable: Yes
A
3 7/8 in
B
5 1/2 in
C
2 1/8 in
D
5/8 in
E
13/16 in
F
7 in
I.D. Max
2.0040 in
I.D. Min
2.0010 in
J
1/32 in
K
1/8 in
Bunting Bearings Llc Bunting&Reg; LT324832
UPC: 717905100673 | UNSPSC: 31171501 | GTIN:
Bearings > Flange Mount Bearing Units > Flange Mount Plain Sleeve Bearing Units
Bunting® Lube-Align® Flange Mount Bearing Unit, 2.004 in Bore, 5-1/2 in Bolt Center-to-Center Length, 13/16 in Diameter Bolt Circle, 2-Bolt Flange Mounting, 7 in Overall Length/Diameter, 2-1/8 in Overall Depth, 3-7/8 in Overall Height, Sintered Bronze Bearing, 10 to 220 deg F
Features:
- A special casting technique which locks the bearing inside the aluminum housing, yet allows sufficient freedom of movement to enable the bearing to position itself to line up with greatly varying shaft directions
- This self-aligning feature saves by eliminating the costly hand labor normally required to align conventional bearings with shafts
- The powdered metal bronze bearings used in Lube-Align® products are actually 18% oil-impregnated
- In action, the oil literally rises to the surface to create a smooth, hydraulic cushion for the shaft which prolongs both bearings and shaft life
- Lube-Align® bearings save by eliminating the need for additional lubrication for the prolonged life of the bearing
- Lube-Align® bearings are made in more than 115 standard sizes ranging from ID 1/8 to 2 in for bearings and OD 3/4 to 3-1/2 in for the aluminum housings
- All of the bearings are equipped with exclusive 'fast mount' aluminum housings which save by keeping installation time and costs at an absolute minimum
- Devised and built on equipment which mass-produces Lube-Align® bearings
- Mass-production capacity combined with the increasing demand for Lube-Align® bearings keeps unit costs in quantities at a consistently economical level
Specs:
- Overall Length/Diameter: 7 in
- Flange Mounting Type: 2-Bolt
- Bolt Center-to-Center Length: 5-1/2 in
- Bolt Circle Diameter: 13/16 in
- Bearing Material: Sintered Bronze
- Temperature Rating: 10 to 220 deg F
- Overall Depth: 2-1/8 in
- Overall Height: 3-7/8 in
- Bore Diameter: 2.004 in
Certifications/Standards:
ANSI/ASQC Z1.4 | ASTM B438 | CBSA/NFFS/PTDA Association | MIL-B-5687D Military Specification | OSHA Standard 29 CFR 1910.1200 | SAE 841
Warranty:
90 Days
SKU: 578747
Shaft sleeves/bunting
Really Good Price and Good Quality from what I can see. We use as shaft sleeves on electric pumps. Will order again!
Read moreHow do I choose the right type of bearing for my application?
Start with the load and how it’s applied. You need to know if you’re dealing with radial loads, axial loads, or a mix of both. Then look at speed, operating environment, and space constraints. For example, ball bearings are great for high speed and lighter loads, while roller bearings handle heavier loads but usually at lower speeds. If there’s contamination, moisture, or heat involved, you may need sealed bearings or specific materials. In most cases, the right choice comes down to matching load type, speed, and environment to the bearing design.
| Brand | Edwards |
| Model | TD180/1.25X6 |
| Brand | Rocky Mountain Twist |
| Model | 95000524 |
SKU: 578747
Shaft sleeves/bunting
Really Good Price and Good Quality from what I can see. We use as shaft sleeves on electric pumps. Will order again!
Read more