MROSupply Has Hundreds Of Brands, Millions Of Products, Including
Image for Illustration purposes only. Actual product may vary
SKF Bearing LHDF 900/5 DIST GREASES
MODEL LHDF 900/5
$104.26 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $1
Select Quantity
Typically Ships in: 1 day
Returnable: See conditions
Certifications
Rust test, ASTM D665 A/B: Pass; Cleanliness, ISO 4406:2021 18/17/13: Pass
Colour
Amber
Density (DIN 51757) at 20 °C (68 ºf)
0.885 g/cm³
Flash point, DIN ISO 2592
202 °C
Operating Temperature Range
5-50 °C
Pack Height
300 mm
Pack Length
190 mm
Pack Width
135 mm
Packsize
5 litre can
Pourpoint, DIN ISO 3016
-28 °C
Recommended Storage Temperature
10-50 °C
Shelf Life
5 year
Suitable for Drive up Method
Suitable for mounting bearings with drive up method in evironments of 35 °C to 45 °C and for dismounting with the oil injection method in environments of 10 °C to 45 °C
Viscosity Index
187
Our mounting and dismounting fluids are recommended when using SKF hydraulic equipment such as hydraulic pumps, HMV nuts, oil injection equipment, among others. The one recommended fro dismtounting with the oil injection technique has a higher viscosity. The one with the lower viscosity is for more for mounting and general purpose applications. Be aware that environment temperatures might alter the choice of these oils.
- Anti-corrosion properties
- Non-aggressive to bearing seals material like nitrile rubber, Perbunan, chrome leather, leather, PTFE, etc.
- Prevents corrosion
| Brand | Dodge |
| Model | L190X1-1/4 |
| Brand | Stearns |
| Model | 801697000M28 |
| Brand | WEG |
| Model | 00718ET3E213JM-S |
| Brand | NTN Bearing |
| Model | 6856C3 |
| Brand | MCR Safety |
| Model | 9318K13 |
| Brand | Taylor Pneumatic |
| Model | T-7763S |
| Brand | Regal Cutting Tools |
| Model | 008963AS |
| Brand | Band-It |
| Model | UL2119 |
Disclaimer: The return policy information shown below is merely an excerpt from SKF's General Conditions of Sale.
RETURN OF GOODS FOR CREDIT
Goods will not be accepted for return without prior written approval from SKF. The return freight must be prepaid by the Buyer. Unless return of Goods is due to Supplier error, Goods returned will be subject to a credit service fee of $25.00 or 15% of the credit value, whichever is greater. An additional service fee may apply is further inspection is required at the discretion of SKF