MROSupply Has Hundreds Of Brands, Millions Of Products, Including
Image for Illustration purposes only. Actual product may vary
SKF Bearing TIH 100M/230V Maintenance Products
MODEL TIH 100M/230V
$8,140.20 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $1
Select Quantity
Typically Ships in: 1 day
Returnable:No
Bearing Support Arms
Yes, foldable
Coil Diameter
110 mm
Colour
Grey;Black
Cooling Fan
No
Demagnetisation after Heating (according SKF Norms)
< 2 A/cm
Dimensions (W X L X H)
230 x 570 x 350 mm
Error Guiding Codes
Yes
Heating performance example (bearing, weight, temperature, time)
23156 CC/W33, 97 kg, 110 °C, 20 min
Heating Temperature (max)
250 °C
Heating Temperature Control
0-250 °C
Heating Temperature Steps
1 °C
Heating Time Control
0.1-60 min
Heating Time Steps
0.1 min
Housing
Steel; Glass fibre filled polyamide
Main Yoke Type
Swivel yoke, 56 x 56 mm
Operating Area Height
205 mm
Operating Area Width
155 mm
Pack Height
320 mm
Pack Length
600 mm
Pack Width
260 mm
Power Consumption (max)
3.6 kVA
Power Setting
50%;100%
Remote Control Panel (wired)
Yes, with LED display
Temperature Measurement
Magnetic probe K-type
Thermal Overload Protection
Yes
Thermometer Mode
Yes
Time Mode
Yes
Voltage
220-240 V
Voltage Frequency
50-60 Hz
Workpiece Bore Diameter
20 mm
Workpiece Weight (max)
120 kg
Yoke Storage
Yes, internal
Medium induction heater
The SKF TIH 100M is a medium sized induction heater and is designed for the hot mounting of bearings. This compact heater is ideal for use on workbenches and can easily be transported to on-site applications with the optional heater trolley TIH T1. The heater is supplied with a swivel yoke and two optional yokes for smaller bearings. The TIH 100M can heat small bearings with a bore diameter of just 20 mm and larger bearings with a maximum weight of 120 kg.
- Supplied with a swivel yoke and two smaller yokes, located in an integrated storage compartment
- Easy and safe to use with automatic temperature control or time controlled heating
- Automatic demagnetization reduces risk of bearing contamination
- Suitable for non-bearing applications for workpieces weighing up to 60 kg
- Automatic temperature hold function to keep the bearing hot after completion of the heating cycle
| Brand | SKF Bearing |
| Model | TFL 513 |
| Brand | FAG Bearing |
| Model | N217 C3 |
Disclaimer: The return policy information shown below is merely an excerpt from SKF's General Conditions of Sale.
RETURN OF GOODS FOR CREDIT
Goods will not be accepted for return without prior written approval from SKF. The return freight must be prepaid by the Buyer. Unless return of Goods is due to Supplier error, Goods returned will be subject to a credit service fee of $25.00 or 15% of the credit value, whichever is greater. An additional service fee may apply is further inspection is required at the discretion of SKF