MROSupply Has Hundreds Of Brands, Millions Of Products, Including
Image for Illustration purposes only. Actual product may vary
$149.97 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $1
Select Quantity
Typically Ships in: 1 day
Returnable:No
Basic Static Load Rating
11.2 kN
Bearing Material
High temperature steel
Bearing Outer Ring Locating Feature
None
Bore Diameter
30 mm
Bore Type
Cylindrical
Cage
Non-metallic
Clearance
Normal
Coating
Coated
Filling Slots
Without
Limiting Speed
90 r/min
Lubricant
Solid lubricant
Matched Arrangement
No
Maximum Operating Temperature
350 °C
Number of Rows
1
O.D. (in)
2.441
Pack Height
67 mm
Pack Length
65 mm
Pack Width
22 mm
Radial Internal Clearance
Multiples of C5
Relubrication Feature
Without
Sealing
Shield on both sides
Sealing Type
Non-contact
Tolerance Class
Normal
Width
16 mm
Deep groove ball bearing for high temperature applications with shields on both sides
Single row deep groove ball bearings for high temperature applications, with shields on both sides, are designed for challenging operating conditions, with certain variants being capable of performing at temperatures as high as 350 C (660 F). They have larger radial internal clearances and use graphite-based lubricants that enable operation at high temperatures. They are lubricated for the life of the bearing and the entire surface of the bearings and shields are manganese phosphate treated, which enhances adhesion of the lubricant to the metal and improves their running-in properties. As with deep groove ball bearings generally, they are particularly versatile, accommodate radial and axial loads in both directions, and are easy to mount.
- Optimized for operation at high temperatures up to 350 C (660 F)
- Easily swapped with grease-lubricated bearings of corresponding ISO dimensions
- Increased reliability, reduced complexity and decreased environmental impact
- Integral sealing prolongs bearing service life
- Typical benefits of single row deep groove ball bearings
| Brand | IKO Bearing |
| Model | OS12193 |
Disclaimer: The return policy information shown below is merely an excerpt from SKF's General Conditions of Sale.
RETURN OF GOODS FOR CREDIT
Goods will not be accepted for return without prior written approval from SKF. The return freight must be prepaid by the Buyer. Unless return of Goods is due to Supplier error, Goods returned will be subject to a credit service fee of $25.00 or 15% of the credit value, whichever is greater. An additional service fee may apply is further inspection is required at the discretion of SKF