
Image for Illustration purposes only. Actual product may vary
$153.95 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $1
Select Quantity
Typically Ships in: 1 day
Returnable:No
Application
For material handling applications
Attachment Bolt Diameter
15.875 mm
Basic Dynamic Load Rating
35.1 kN
Basic Static Load Rating
23.2 kN
Bearing Material
Bearing steel
Bearing Sealing
Seal and flinger on both sides
Bore Type
Cylindrical
Centre Distance Between Bolt Holes
111 mm
Coating
Without
Fastening Bolt Hole Type
Plain
Flanged Housing Type
Square
Grease Fitting
With
Hexagonal Key Size for Set Screw
4.763 mm
Housing
Cast iron
Housing Overall Width
43 mm
Housing Type
Flanged
I.D.
1 8/9 in
Inner Ring Retaining Feature
Set screws
Limiting Speed
4000 r/min
Lubricant
Grease
Number of Bolt Holes for Fasteners
4
O.D. (in)
5 5/8
Pack Height
154 mm
Pack Length
157 mm
Pack Width
65 mm
Relubrication Hole
With
Rubber Seating Ring
Without
Sealing Type
Contact, standard
Set Screw
3/8-24 UNF
Set Screw Tightening Torque
16.5 N·m
Shaft Diameter
49.2125 mm
Total Bearing Width
51.6 mm
Total Width
60.6 mm
Unit Sealing
Optional end cover
Specifications
Inner Diameter (mm) | 49.213 |
---|---|
Outer Diameter (mm) | 143.000 |
Width (mm) | 66.600 |
Dimension Type | Inch |
Lubricant (in Bearing) | Grease |
Bearing Bore Type | Cylindrical |
Bearing Sealing | Seal and flinger on both sides |
Fastening Bolt Hole Type (Housing) | Plain holes |
Housing Material | Cast iron |
Relubrication Nipple | With |
Unit Sealing | Without |
Brand
Dodge
Model
F4B-SC-115
Brand
Link-Belt
Model
10424006
Brand
Browning
Model
767965
Brand
NTN Bearing
Model
UCFU-1.15/16
Disclaimer: The return policy information shown below is merely an excerpt from SKF's General Conditions of Sale.
RETURN OF GOODS FOR CREDIT
Goods will not be accepted for return without prior written approval from SKF. The return freight must be prepaid by the Buyer. Unless return of Goods is due to Supplier error, Goods returned will be subject to a credit service fee of $25.00 or 15% of the credit value, whichever is greater. An additional service fee may apply is further inspection is required at the discretion of SKF