MROSupply Has Hundreds Of Brands, Millions Of Products, Including
Image for Illustration purposes only. Actual product may vary
Nachi Bearing 7206BMUC3 ANGULAR CONTACT BEARING 30mm Inner Diameter x 62mm Outer Diameter x 16mm Width Angular Contact Ball Bearing - Single - 40�
MODEL 7206BMUC3
This vendor has a minimum order quantity of 2. Order minimum ($) may be applied. Add desired QTY to cart and proceed to checkout to view minimum
Contact supplier for technical support on: 800-829-5787
$43.00 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $1
Select Quantity
Brand Minimum Order Quantity: 2
Typically Ships in: 1 day
Returnable: See conditions
Bore Type
Cylindrical
Cage Material
Machined High Strength Brass Cage
Closure Type
Open
Contact Angle (Deg)
40
Dynamic Load Capacity (N)
19400
Grease Fill
No Fill
Inner Diameter (mm)
30
Inner Ring Material
JIS SUJ2 Steel
Internal Clearance
C3
ISO Precision Class
P0
Limiting Speed - Grease (RPM)
9600
Limiting Speed - Oil (RPM)
13000
Max Operating Temp.
120°C (248°F)
Number of Rows
1
Outer Diameter (mm)
62
Outer Ring Material
JIS SUJ2 Steel
Preload
N/A
Rolling Element Material
JIS SUJ2 Steel
Seals or Shields
No
Series
7200
Snap Ring
No
Static Load Capacity (N)
12500
Universally (Flush) Ground
Yes
Width (mm)
13000
The single-row angular contact ball bearing was designed to support radial, axial or composite loads, however, the axial load must be in one direction. The high thrust capacity is achieved by a higher shoulder on one side of the outer ring. The direction of the load through the balls forms the contact angle. The thrust capacity increases with the contact angle. The BMU bearings are commonly referred to as thrust bearings. These bearings have a 40 deg contact angle to accept heavy axial loads. The bearings have Universally Flush Ground rings to facilitate mounting in multiple bearing sets. The inner and outer rings have identical widths. These bearings can be mounted as DB, DF and DT pairs or can be combined into triplex and quadraplex sets. When two bearings are mounted together, a clearance or preload may be obtained without the use of shims or spacers. This bearing has a machined brass cage and is not available with seals or shields. These bearings are most commonly used in vertical pump and motor applications. Higher precision. Increased speed and load carrying capacity. Support radial, axial or composite loads in only one direction. Capable of moment loads if used in pairs. Machined brass cage. Energy efficient. Low noise. The raceways of both the inner and outer rings of this bearing type are made with a set contact angle. This bearing type is generally used in adjacent positions.
#313739
Brand
SKF Bearing
Model
7206 BECBY
#313934
Brand
SKF Bearing
Model
7206 BECBM
#1495273
Brand
Koyo Bearing
Model
7206B-5G C3FY
#5035065
Brand
NSK Bearings
Model
7206BYG
#5035063
Brand
NSK Bearings
Model
7206BMPC
#2176487
Brand
FAG Bearing
Model
7206B.MP.UA
#2176488
Brand
FAG Bearing
Model
7206B.MP.UO
| Brand | Koyo Bearing |
| Model | 6328 |
| Brand | EATON |
| Model | PKZM0-2.5 |
| Brand | FAG Bearing |
| Model | 51106 |
| Brand | United Abrasives |
| Model | 60777 |
| Brand | Bauer Gearmotor |
| Model | 30694371 |
| Brand | Nachi Bearing |
| Model | 6202ZZE |
| Brand | Cortina |
| Model | 03-600-41 |