McGill Bearing CCF 1 1/2 SB 1 1/2" Roller Diameter, Standard Stud, Bearing Steel with Black Oxide Finish, LUBRI-DISC Seal, Hex Hole, CAMROL Stud Type Crowned Inch Cam Follower

Regal Beloit Mcgill&Reg; CCF 1 1/2 SB

UPC: 726166035846 | UNSPSC: 26101708 | GTIN:

Bearings > Cam Follower & Yoke Rollers > Crowned/Flat Follower & Track Runners

McGill® CAMROL® Cam Follower, Crowned OD, Series: CCF, 1-1/2 in Roller Diameter, 7/8 in Roller Width, 5/8 in Stud Diameter, 1-1/2 in Stud Length, 5/8-18 UNC Thread, 3/4 in Thread Length, 4840 lb Dynamic/4000 lb Static Load, 2500 rpm Maximum, -20 to 250 deg F, Standard Stud, Sealed Closure, Hex Head, Chrome Steel Roller, 8620H Steel Stud, Black Oxide

Features:

• Full complement needle roller construction provides high radial load capacity, it also provides improved resistance to shock loading versus caged needle bearing
• It provides improved resistance to shock loading versus caged needle bearing
• A heavy sectioned outer race design to help withstand shock loading of cam follower operation
• Inner studs are induction heat treated in the roller path and flange surfaces
• Our sealed bearing option helps extend bearing life by utilizing a lubrication groove and LUBRI-DISC® seals
• Bearings are supplied pre-lubricated with lithium soap thickened grease
• The annular groove in the outer raceway provides a lubrication reservoir which increases the pre-lubricated life of the bearing
• The threads are manufactured to a class 2 tolerance

Specs:

• Stud Material: 8620H Steel
• Stud Type: Standard
• Stud Diameter: 5/8 in
• Stud Length: 1-1/2 in
• Roller Material: Chrome Steel
• Roller Width: 7/8 in
• Roller Diameter: 1-1/2 in
• Thread Length: 3/4 in
• Head Type: Hex
• Temperature Rating: -20 to 250 deg F
• Load Capacity: 4840 lb Dynamic/4000 lb Static
• Closure Type: Sealed
• Thread Size: 5/8-18 UNC
• Finish: Black Oxide
• Maximum Speed: 2500 rpm
• Type: Crowned OD
• Series: CCF

Packaging:

• Length: 1.68 in
• Width: 1.68 in
• Height: 2.62 in
• Weight: 0.49 lb

Certifications/Standards:

ABMA Standard