We never sell your data to third parties
Link-Belt W2E20EL W200 unmounted ball bearing insert with 1-1/4" bore, eccentric locking collar, and C3 internal clearance. This intermediate-duty 200-series ball bearing features a Buna single-lip contact seal, nylon retainer, and 2.4409" OD. Suitable for general industrial applications requiring reliable radial load support.
MODEL 10435646
Contact supplier for technical support on: 800-626-2120
$42.75 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable: Yes
Available seal type
E lip seal
Bearing Type
Intermediate duty ball brg
Bore length (in)
1 13/32 in
Bore size (in)
1.25
C dynamic load rating
4390 lb
Co static load rating
2530 lb
Height
2.00
Inner ring hub diameter (in)
1.587 in
Inner ring width
0.938 in
Length
3.00
Locking collar outside diameter (in)
1 3/4 in
Locking collar width (in)
5/8 in
Locking device kit
W2E205S
Lubrication type
EXXON RONEX MP STD
Max Speed
5600 rpm
Max temperature (°F (°C))
225 (107) F (C)
Maximum Temperature (C)
107
Mounted clearance
C3 standard
Outer Ring Width (in)
0.7087 in
Outside diameter (in)
2.4409 in
Primary seal
BUNA single lip contact seal
Retainer type
Nylon
Service instructions
BR3-007 LB 200 ball-300 ball
Setscrew torque (in-lbs)
165-185 in/lbs
Shaft diameter (in)
1 1/4 in
Shaft locking
Eccentric locking collar
Short Hub Length (in)
0.3543 in
Size code
206
Type of seal
E lip seal
Unit of dimension
in
Vibration frequency fundamental train
0.0067 cps
Vibration frequency inner ring defect
0.0905 cps
Vibration frequency outer ring defect
0.0595 cps
Vibration frequency roller spin
0.0385 cps
Volume
0.078
Volume unit
GLL
Width
3.00
1 1/4" Unmounted, Non Relubricatable, Spherical OD, Ball Bearing, Intermediate Duty, Eccentric Cam Locking Collar, Single Lip Contact Seal
How do I choose the right type of bearing for my application?
Start with the load and how it’s applied. You need to know if you’re dealing with radial loads, axial loads, or a mix of both. Then look at speed, operating environment, and space constraints. For example, ball bearings are great for high speed and lighter loads, while roller bearings handle heavier loads but usually at lower speeds. If there’s contamination, moisture, or heat involved, you may need sealed bearings or specific materials. In most cases, the right choice comes down to matching load type, speed, and environment to the bearing design.
#500215
Brand
Link-Belt
Model
10435640
#500029
Brand
Link-Belt
Model
10435648
#500229
Brand
Link-Belt
Model
10435642
#500247
Brand
Link-Belt
Model
10435643
| Brand | Dormer Pramet |
| Model | 6706820 |
| Brand | Adam Equipment |
| Model | SAB 124e |
| Brand | MCR Safety |
| Model | 9370 |
