We never sell your data to third parties
Image for Illustration purposes only. Actual product may vary
Timken IR-12814848 is a single row cylindrical roller bearing (CRB) for general industrial applications. This bearing is part of the <12 inch outside diameter size class, suitable for radial loads and axial float in machinery such as gearboxes and electric motors.
MODEL IR-12814848
$751.54 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable: Yes
203.154 mm Shaft diameter
8.000 in Used with Bearing Designation:HJ-14817848
203.185 mm Min Interference fit
8.0006 in
203.2 mm Max Interference fit
8.0014 in
203.215 mm Min loose transition fit
7.9982 in
203.236 mm Max loose transition fit
7.9994 in
4.06 mm Dimension
8.000 in
Chamfer
0.16 in
Chamfer r
0.16 in 4.06 mm
Dimension B
3 in 76.2 mm
Dimension D
8.000 in 203.2 mm
Dimension F
9.25 in 234.95 mm
Max. Interference Fit
8.0014 in 203.236 mm
Max. Loose Transition Fit S
7.9994 in 203.185 mm
Min. Interference Fit
8.0006 in 203.215 mm
Min. Loose Transition Fit S
7.9982 in 203.154 mm
Shaft Diameter
8.000 in
Used with Bearing Designation
HJ-14817848
- Ideal choice where the shaft is not practical to use as inner raceway.
- Designed to meet established inch tolerances.
- Maximum shaft fillet radius cannot exceed inner-ring bore chamfer as shown.
- Designed to be axially clamped against shoulder for loose transition fit on shaft.
- After mounting, for tight transition fit (keeping inner ring from rotating relative to shaft), inner-ring O.D. must not exceed raceway diameter on matching bearing.
- After mounting, if O.D. of inner ring exceeds the required raceway diameter for matching bearing, ring should be ground to proper diameter while mounted on shaft.
- Unmarked end of inner ring to be assembled against the shaft shoulder to ensure clearing the maximum allowable shaft fillet as indicated in tables shown.
SKU: 5066946
Best company to buy from
I always buy from MRO is a very reliable company to work with
Read moreHow do I choose the right type of bearing for my application?
Start with the load and how it’s applied. You need to know if you’re dealing with radial loads, axial loads, or a mix of both. Then look at speed, operating environment, and space constraints. For example, ball bearings are great for high speed and lighter loads, while roller bearings handle heavier loads but usually at lower speeds. If there’s contamination, moisture, or heat involved, you may need sealed bearings or specific materials. In most cases, the right choice comes down to matching load type, speed, and environment to the bearing design.
| Brand | Kipp |
| Model | K0608.9066 |
| Brand | MRO Supply |
| Model | FS7202-06-06-NWO-FG |
| Brand | Dormer Pramet |
| Model | 5984419 |
SKU: 5066946
Best company to buy from
I always buy from MRO is a very reliable company to work with
Read more