We never sell your data to third parties
Dodge 141122 FC-SCM-307 MOD flanged cartridge bearing with 3-7/16" bore, set screw locking, medium duty rating, cast iron housing, 218 series ball bearing, DualGuard seal, non-expansion configuration for shaft mounting applications. 3-7/16" bore 4-Bolt Piloted Flange Ball Bearing with Set Screw locking used in General Purpose applications
MODEL FC-SCM-307 MOD
Contact supplier for technical support on: +1-864-284-5700
$894.49 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable: See conditions
Application
General Purpose
Ball bearing series
218 Series
Bearing type
Ball, ball
Bolt circle
8.6300 in, 219.202 mm
Bolt Diameter
0.7500 in
Bolt to bolt max
6.0000 in, 152.4 mm
Bolt to bolt min
6.0000 in, 152.4 mm
Bore
3 7/16 in
Bore length
2.5600 in, 65.024 mm
Duty
Medium duty
Expansion
No
Expansion capability
Non-expansion (fixed)
Greasable
Yes
High temp
No
Housing construction
Solid
Housing material
Cast iron
Housing option
Cast iron
Housing type
Piloted flange
Insert material
Steel
Insert option
Bearing steel
Insert type
Ball Bearing
Locking
Set screw
Lubrication type
Grease
Pilot depth
1.1300 in, 28.702 mm
Pilot diameter
5.5000 in, 139.7 mm
Relubrication
Yes
Seal option
DualGuard seals with flingers
Seal type
Single-lip contact
Sensor ready
Adapter required
Shaft attachment
Setscrew
Shaft diameter
3.4375 in
Standoff housing
No
Suitable for high temperature
No
Suitable for washdown
No
Type
4-bolt piloted flange
- Housing Type: FC Flanged Cartridge (round piloted flange with bolt circle)
- Bore Diameter: 3-7/16 inches
- Locking Type: Set screw (65 degree angle) for maximum holding force
- Duty Rating: Medium duty (SCM) for heavier loads than standard
- Housing Material: Cast iron construction
- Bearing Series: 218 series ball bearing
- Seal Type: DualGuard single lip seal with rubberized flinger
- Expansion Type: Non-expansion (fixed) bearing
- Applications: Surface mounting with piloted registration for precise alignment
SKU: 126887
Bearings
Order arrived on time, could have been packed a little tighter as the boxes the bearings came in were tore up. All is good as i used all of them instead of leaving them set in inventory.
Read moreSKU: 115894
Excellent
We recently purchased a 30-year old hydroseeder and have no manuals or parts diagrams for it. The manufacturer is since out of business and there is very limited information on line. The most critical part we needed was a Dodge part. The original part was clearly marked with the Dodge name and part number. MRO was quickly able to identify the replacement part and we had in hand in two days. Perfect fit. Thank you MRO Supply for helping make our machine functional.
Read moreHow do I choose the right type of bearing for my application?
Start with the load and how it’s applied. You need to know if you’re dealing with radial loads, axial loads, or a mix of both. Then look at speed, operating environment, and space constraints. For example, ball bearings are great for high speed and lighter loads, while roller bearings handle heavier loads but usually at lower speeds. If there’s contamination, moisture, or heat involved, you may need sealed bearings or specific materials. In most cases, the right choice comes down to matching load type, speed, and environment to the bearing design.
| Brand | Cleveland |
| Model | C75159 |
| Brand | M.K. Morse |
| Model | JSHRBC01 |
SKU: 126887
Bearings
Order arrived on time, could have been packed a little tighter as the boxes the bearings came in were tore up. All is good as i used all of them instead of leaving them set in inventory.
Read moreSKU: 115894
Excellent
We recently purchased a 30-year old hydroseeder and have no manuals or parts diagrams for it. The manufacturer is since out of business and there is very limited information on line. The most critical part we needed was a Dodge part. The original part was clearly marked with the Dodge name and part number. MRO was quickly able to identify the replacement part and we had in hand in two days. Perfect fit. Thank you MRO Supply for helping make our machine functional.
Read moreItem must be unused and undamaged, in it's orginal package. For Dodge there is typically a 10% + $30 US re-stocking fee, although it may vary from case to case. Re-packing fees may apply. Re-stocking fee applies bor both returns for credit and return for exchange.
Warranty is redeemed directly with manufacturer. If your item was damaged during usage, please let us know and we will help you get in touch with your nearest service center, they will guide you about the steps to follow to redeem the manufacturer's warranty.
For further information on our returns/warranty policy, please visit:
https://www.mrosupply.com/page/returnwarranty-policy/