We never sell your data to third parties
SKF F4B 25M-TF 25mm shaft 4-bolt flange bearing unit with set screw locking. The cast iron housing supports a pre-lubricated insert bearing. Suitable for conveyor drives, fan supports, and general industrial applications where a compact flange mounting is required.
MODEL F4B 25M-TF
$55.42 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable: See conditions
Application
For material handling applications
Attachment Bolt Diameter
10 mm
Basic Dynamic Load Rating
14 kN
Basic Static Load Rating
7.8 kN
Bearing Material
Bearing steel
Bearing Sealing
Seal and flinger on both sides
Bore Type
Cylindrical
Centre Distance Between Bolt Holes
69.9 mm
Coating
Without
Fastening Bolt Hole Type
Plain
Flanged Housing Type
Square
Grease Fitting
With
Hexagonal Key Size for Set Screw
3 mm
Housing
Cast iron
Housing Overall Width
31.2 mm
Housing Type
Flanged
Inner Ring Retaining Feature
Set screws
Limiting Speed
7000 r/min
Lubricant
Grease
Number of Bolt Holes for Fasteners
4
Pack Height
106 mm
Pack Length
104 mm
Pack Width
49 mm
Relubrication Hole
With
Rubber Seating Ring
Without
Sealing Type
Contact, standard
Set Screw
M6x0.75
Set Screw Tightening Torque
4 N·m
Shaft Diameter
25 mm
Total Bearing Width
34.1 mm
Total Width
40.7 mm
Unit Sealing
Optional end cover
These square flanged ball bearing units are compliant with North American standards. They consist of an insert bearing, with an extended inner ring and set screw locking, and are suitable for applications where the direction of rotation is constant or alternating. The bearing is mounted in a cast iron housing, which can be bolted to a machine wall or frame. Ball bearing units can accommodate moderate initial misalignment, but normally do not permit axial displacement.
- Resist high levels of contamination
- Designed for high temperatures and speeds
- Accommodate relatively heavy loads
- Cost-effective
SKU: 2069041
Purchase of bearing
exactly what we needed and it showed up in only 1 day thank you so much.
Read moreSKU: 2067505
Skf 6205-2z/gjn
Item is exactly what I was looking for. Like always you get high quality with SKF
Read moreSKU: 319331
Agradecimiento.
Excelente servicio, confiable, rápido y efectivo. Los seguiré llamando para mis necesidades.
Read moreHow do I choose the right type of bearing for my application?
Start with the load and how it’s applied. You need to know if you’re dealing with radial loads, axial loads, or a mix of both. Then look at speed, operating environment, and space constraints. For example, ball bearings are great for high speed and lighter loads, while roller bearings handle heavier loads but usually at lower speeds. If there’s contamination, moisture, or heat involved, you may need sealed bearings or specific materials. In most cases, the right choice comes down to matching load type, speed, and environment to the bearing design.
| Brand | PT Coupling |
| Model | 70563000 |
| Brand | Timken Belts |
| Model | R5VX1250-3 |
| Brand | Bestorq |
| Model | 4L690 |
| Brand | Precision Twist Drill |
| Model | 5996525 |
SKU: 2069041
Purchase of bearing
exactly what we needed and it showed up in only 1 day thank you so much.
Read moreSKU: 2067505
Skf 6205-2z/gjn
Item is exactly what I was looking for. Like always you get high quality with SKF
Read moreSKU: 319331
Agradecimiento.
Excelente servicio, confiable, rápido y efectivo. Los seguiré llamando para mis necesidades.
Read moreDisclaimer: The return policy information shown below is merely an excerpt from SKF's General Conditions of Sale.
RETURN OF GOODS FOR CREDIT
Goods will not be accepted for return without prior written approval from SKF. The return freight must be prepaid by the Buyer. Unless return of Goods is due to Supplier error, Goods returned will be subject to a credit service fee of $25.00 or 15% of the credit value, whichever is greater. An additional service fee may apply is further inspection is required at the discretion of SKF