We never sell your data to third parties
Dodge 141614 FC-SC-104 MOD flanged cartridge piloted flange bearing with 1-1/4" bore, 65-degree set screw locking, 207 series ball bearing insert, cast iron housing, DualGuard seals, non-expansion (fixed) design for standard duty applications. 1-1/4" bore 4-Bolt Piloted Flange Ball Bearing with Set Screw locking used in General Purpose applications
MODEL FC-SC-104 MOD
Contact supplier for technical support on: +1-864-284-5700
$151.29 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable: See conditions
Application
General Purpose
Ball bearing series
207 series
Bearing type
Ball, ball
Bolt circle
4.1300 in, 104.902 mm
Bolt Diameter
0.3750 in
Bolt to bolt max
4.1300 in, 104.902 mm
Bolt to bolt min
4.1300 in, 104.902 mm
Bore
1 1/4 in
Bore length
1.7100 in, 43.434 mm
Duty
Standard Duty
Expansion
No
Expansion capability
Non-expansion (fixed)
Greasable
Yes
High temp
No
Housing construction
Solid
Housing material
Cast iron
Housing option
Cast iron
Housing type
Piloted flange
Insert material
Steel
Insert option
Bearing steel
Insert type
Ball Bearing
Locking
Set screw
Lubrication type
Grease
Pilot depth
0.3800 in, 9.652 mm
Pilot diameter
3.3750 in, 85.725 mm
Relubrication
Yes
Seal option
DualGuard seals with flingers
Seal type
Single-lip contact
Sensor ready
Adapter required
Shaft attachment
Setscrew
Shaft diameter
1.2500 in
Standoff housing
No
Suitable for high temperature
No
Suitable for washdown
No
Type
4-bolt piloted flange
- Housing Type: FC Flanged Cartridge with piloted mounting design
- Bore Diameter: 1-1/4" (1.25")
- Locking Mechanism: 65-degree set screw for maximum holding power
- Bearing Series: 207 series ball bearing insert
- Housing Material: Cast iron construction for standard duty applications
- Sealing: DualGuard seal system with rubberized flingers
- Mounting: Non-expansion (fixed) configuration
- Rolling Element: Ball bearing for smooth operation
- Applications: Ideal for surface-mounted applications requiring precise shaft positioning and reliable performance
SKU: 118299
Prompt & great service
As usual MRO Supply team are quick in shipping the ordered parts correctly without any delay.. Will shop online again confidently knowing they offer very good and prompt service!
Read moreSKU: 126887
Bearings
Order arrived on time, could have been packed a little tighter as the boxes the bearings came in were tore up. All is good as i used all of them instead of leaving them set in inventory.
Read moreHow do I choose the right type of bearing for my application?
Start with the load and how it’s applied. You need to know if you’re dealing with radial loads, axial loads, or a mix of both. Then look at speed, operating environment, and space constraints. For example, ball bearings are great for high speed and lighter loads, while roller bearings handle heavier loads but usually at lower speeds. If there’s contamination, moisture, or heat involved, you may need sealed bearings or specific materials. In most cases, the right choice comes down to matching load type, speed, and environment to the bearing design.
| Brand | IKO Bearing |
| Model | NATA5905 |
| Brand | Cleveland |
| Model | C76238 |
| Brand | Wiegmann |
| Model | N412483812CSTD |
| Brand | Wiegmann |
| Model | T2272CH |
| Brand | IKO Bearing |
| Model | PHSB8 |
SKU: 118299
Prompt & great service
As usual MRO Supply team are quick in shipping the ordered parts correctly without any delay.. Will shop online again confidently knowing they offer very good and prompt service!
Read moreSKU: 126887
Bearings
Order arrived on time, could have been packed a little tighter as the boxes the bearings came in were tore up. All is good as i used all of them instead of leaving them set in inventory.
Read moreItem must be unused and undamaged, in it's orginal package. For Dodge there is typically a 10% + $30 US re-stocking fee, although it may vary from case to case. Re-packing fees may apply. Re-stocking fee applies bor both returns for credit and return for exchange.
Warranty is redeemed directly with manufacturer. If your item was damaged during usage, please let us know and we will help you get in touch with your nearest service center, they will guide you about the steps to follow to redeem the manufacturer's warranty.
For further information on our returns/warranty policy, please visit:
https://www.mrosupply.com/page/returnwarranty-policy/