We never sell your data to third parties
Dodge 141515 P2B-SCAH-107 MOD two-bolt pillow block bearing, 1-7/16" bore, set screw locking, standard duty, cast iron housing, air handling application. Ball bearing insert with single-lip seal and flingers, bearing steel insert, relubrication capable. Non-expansion fixed bearing for shaft support in HVAC and air handling systems.
MODEL P2B-SCAH-107 MOD
Contact supplier for technical support on: +1-864-284-5700
$148.22 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable: See conditions
Application
Air handling
Ball bearing series
207 series
Base to center height
1.8800 in, 47.752 mm
Bearing Series
207 series ball bearing insert
Bearing type
Ball, ball
Bolt Diameter
0.5000 in
Bolt to bolt max
5.4400 in, 138.176 mm
Bolt to bolt min
4.6800 in, 118.872 mm
Bore
1 7/16 in
Bore Diameter
1-7/16 inches
Bore length
1.7100 in, 43.434 mm
Duty
Standard Duty
Expansion
No
Expansion capability
Non-expansion (fixed)
Expansion Type
Non-expansion (fixed) bearing
Greasable
Yes
High temp
No
Housing
Cast iron
Housing material
Cast iron
Housing Material
Cast iron
Housing option
Cast iron
Housing type
Two-bolt pillow block
Housing Type
Two-bolt pillow block mounting
I.D.
1 7/16
Insert option
Bearing steel
Insert type
Ball Bearing
Locking
Set screw
Locking Method
65-degree setscrew
Relubrication
Yes
Rolling Element
Ball bearing
Seal option
Single-lip seal with flingers
Seal type
Single-lip contact
Seal Type
Single lip seal
Shaft attachment
Setscrew
Shaft diameter
1.4375 in
Standoff housing
No
Suitable for high temperature
No
Suitable for washdown
No
Take-up frame size
LD-20,TS-250
Type
Pillow block 2-Bolt
Specifications
- Catalog Number: 141515
- Engineering Number: P2B-SCAH-107 MOD
- Housing Type: Pillow Block 2-Bolt
- Bore Size: 1-7/16"
- Locking Type: Set Screw
- Duty Rating: Standard Duty
- Expansion Type: No
- Seal Type: Single-lip seal with flingers
- Weight: 3.1600 lb
SKU: 117408
P90 coupler
These where a perfect match saved me time and money by getting them fro you guys
Read moreHow do I choose the right type of bearing for my application?
Start with the load and how it’s applied. You need to know if you’re dealing with radial loads, axial loads, or a mix of both. Then look at speed, operating environment, and space constraints. For example, ball bearings are great for high speed and lighter loads, while roller bearings handle heavier loads but usually at lower speeds. If there’s contamination, moisture, or heat involved, you may need sealed bearings or specific materials. In most cases, the right choice comes down to matching load type, speed, and environment to the bearing design.
| Brand | Remke |
| Model | SWV-422-E |
| Brand | Precision Twist Drill |
| Model | 5995726 |
| Brand | Jason Industrial |
| Model | BX99 |
| Brand | Consolidated Bearings |
| Model | SAFS-524 |
| Brand | Smith Bearings |
| Model | FCR-1-1/8-E |
SKU: 117408
P90 coupler
These where a perfect match saved me time and money by getting them fro you guys
Read moreItem must be unused and undamaged, in it's orginal package. For Dodge there is typically a 10% + $30 US re-stocking fee, although it may vary from case to case. Re-packing fees may apply. Re-stocking fee applies bor both returns for credit and return for exchange.
Warranty is redeemed directly with manufacturer. If your item was damaged during usage, please let us know and we will help you get in touch with your nearest service center, they will guide you about the steps to follow to redeem the manufacturer's warranty.
For further information on our returns/warranty policy, please visit:
https://www.mrosupply.com/page/returnwarranty-policy/