We never sell your data to third parties
Image for Illustration purposes only. Actual product may vary
Dodge 138651 F2B-SCEZ-100-SHSS-NL Two-Bolt Flange E-Z Kleen ball bearing with 1" bore, stainless steel housing and insert, 65 degree set screw locking, QuadGuard seal, no-lube sealed for life design, corrosion resistant for washdown environments. 1" bore 2-Bolt Flange Ball Bearing with Set Screw locking used in Washdown applications
MODEL F2B-SCEZ-100-SHSS-NL
Contact supplier for technical support on: +1-864-284-5700
$240.84 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable: See conditions
Application
Washdown
Ball bearing series
205 series
Bearing type
Ball, ball
Bolt Diameter
0.3750 in
Bore
1 in
Bore length
1.4600 in, 37.084 mm
Duty
Standard Duty
Expansion
No
Expansion capability
Non-expansion (fixed)
Greasable
No
High temp
No
Housing construction
Solid
Housing material
Stainless steel
Housing option
Stainless steel
Housing type
Two-bolt flange
Insert material
Stainless steel
Insert option
Stainless steel
Insert type
Ball Bearing
Locking
Set screw
Lubrication type
Grease
Relubrication
No
Seal option
QuadGuard seals with flingers
Seal type
Triple-lip contact
Sensor ready
Adapter required
Shaft attachment
Setscrew
Shaft diameter
1.0000 in
Standoff housing
No
Suitable for high temperature
No
Suitable for washdown
Yes
Type
2-bolt flange
- Housing Type: Two-bolt flange mount for surface mounting
- Bore Diameter: 1 inch (25.4mm) shaft size
- Locking Mechanism: 65 degree set screw with maximum locking force
- Housing Material: 304 stainless steel cast housing for corrosion resistance
- Insert Material: Stainless steel ball bearing insert
- Bearing Series: 205 series ball bearing for medium load capacity
- Corrosion Protection: E-Z Kleen line for washdown and food processing environments
- Seal System: QuadGuard triple lip seal with stainless rubberized flinger
- Lubrication: No-Lube sealed for life design, pre-greased with no relubrication required
- Applications: Food processing, pharmaceutical, chemical, and washdown environments requiring corrosion resistance
SKU: 126926
Oem parts
I was repairing a piece of equipment and wanted the same bearings that were removed. MRO Supply had the OEM bearings at a reduced cost. Shipped and received in a timely manner.
Read moreSKU: 126887
Bearings
Order arrived on time, could have been packed a little tighter as the boxes the bearings came in were tore up. All is good as i used all of them instead of leaving them set in inventory.
Read moreHow do I choose the right type of bearing for my application?
Start with the load and how it’s applied. You need to know if you’re dealing with radial loads, axial loads, or a mix of both. Then look at speed, operating environment, and space constraints. For example, ball bearings are great for high speed and lighter loads, while roller bearings handle heavier loads but usually at lower speeds. If there’s contamination, moisture, or heat involved, you may need sealed bearings or specific materials. In most cases, the right choice comes down to matching load type, speed, and environment to the bearing design.
#127007
Brand
Dodge
Model
F2B-SCEZ-100-P
#791267
Brand
Dodge
Model
F4B-SCEZ-100-PSS
#791268
Brand
Dodge
Model
P2B-SCEZ-100-PSS
#5903881
Brand
Dodge
Model
F2B-SCFS-100-SHFS
#5003338
Brand
Dodge
Model
F2B-SCEZ-100-PSS-NLS
| Brand | Orbit Industries |
| Model | 2EXB50-8 |
| Brand | Orbit Industries |
| Model | 2EXB75-6 |
| Brand | Cooper Wiring |
| Model | 7731A-BOX |
SKU: 126926
Oem parts
I was repairing a piece of equipment and wanted the same bearings that were removed. MRO Supply had the OEM bearings at a reduced cost. Shipped and received in a timely manner.
Read moreSKU: 126887
Bearings
Order arrived on time, could have been packed a little tighter as the boxes the bearings came in were tore up. All is good as i used all of them instead of leaving them set in inventory.
Read moreItem must be unused and undamaged, in it's orginal package. For Dodge there is typically a 10% + $30 US re-stocking fee, although it may vary from case to case. Re-packing fees may apply. Re-stocking fee applies bor both returns for credit and return for exchange.
Warranty is redeemed directly with manufacturer. If your item was damaged during usage, please let us know and we will help you get in touch with your nearest service center, they will guide you about the steps to follow to redeem the manufacturer's warranty.
For further information on our returns/warranty policy, please visit:
https://www.mrosupply.com/page/returnwarranty-policy/