We never sell your data to third parties
Image for Illustration purposes only. Actual product may vary
Dodge 076005 P2B-SCED-104 extreme duty two-bolt pillow block bearing with 1-1/4" bore, 65-degree set screw locking, cast iron housing, QuadGuard triple lip seals, Grade 10 balls, and anti-rotation pin for heavy-duty applications. 1-1/4" bore Pillow Block 2-Bolt Ball Bearing with Set Screw locking used in Dirty & Dusty Environment applications
MODEL P2B-SCED-104
Contact supplier for technical support on: +1-864-284-5700
$129.31 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable: See conditions
Application
Dirty & dusty environment
Ball bearing series
207 series
Base to center height
1.8800 in, 47.752 mm
Bearing type
Ball, ball
Bolt Diameter
0.5000 in
Bolt to bolt max
5.4400 in, 138.176 mm
Bolt to bolt min
4.6800 in, 118.872 mm
Bore
1 1/4 in
Bore length
1.7100 in, 43.434 mm
Duty
Standard Duty
Expansion
No
Expansion capability
Non-expansion (fixed)
Finish
Powder coated
Greasable
Yes
High temp
No
Housing construction
Solid
Housing material
Cast iron
Housing option
Cast iron
Housing type
Two-bolt pillow block
I.D.
1 1/4 in
Insert material
Steel
Insert option
Bearing steel
Insert type
Ball Bearing
Locking
Set screw
Lubrication type
Grease
Material
Steel
Max RPM
4500 rpm
Max Speed
3500 RPM
Relubrication
Yes
Rolling element
Standard duty ball
Seal
Triple Lip
Seal option
QuadGuard seals with flingers
Sensor ready
Adapter required
Shaft attachment
Setscrew
Shaft diameter
1.2500 in
Standoff housing
No
Static load capacity
3461 lbf, 15395.295 N
Suitable for high temperature
No
Suitable for washdown
No
Take-up frame size
LD-20,TS-250
Type
Pillow block 2-Bolt
- Housing Type: Two-bolt pillow block, cast iron construction
- Bore Diameter: 1-1/4 inch (31.75mm)
- Locking Type: 65-degree set screw for maximum holding power
- Duty Rating: Extreme Duty (SCED) with Grade 10 balls
- Bearing Series: 207 series, wide inner ring
- Sealing: QuadGuard triple lip seals with stainless rubberized flinger
- Special Features: Anti-rotation pin, Maxlife cage, synthetic grease
- Max Speed: 3,500 RPM
- Applications: Heavy-duty industrial applications requiring superior performance and extended service life
SKU: 126843
Replacement pillow block bearing
I ordered 2 Dodge Pillow block bearings to replace replace a failed bearing on my chipper and to replace a second bearing as a precaution. I received the both bearings promptly, but discovered that the failed bearing also damaged it's housing. Since the housing without a bearing doesn't seem to be readily available, I requested to return the one bearing and replace it with the complete pillow (housing with bearing). Since I was getting an entirely different part, MROSupply customer support suggested that I get a full refund for the bearing and place a new order for the pillow block (housing with bearing). I have received the pillow block and am waiting for the refund which I expect to receive very soon.
Read moreSKU: 115894
Excellent
We recently purchased a 30-year old hydroseeder and have no manuals or parts diagrams for it. The manufacturer is since out of business and there is very limited information on line. The most critical part we needed was a Dodge part. The original part was clearly marked with the Dodge name and part number. MRO was quickly able to identify the replacement part and we had in hand in two days. Perfect fit. Thank you MRO Supply for helping make our machine functional.
Read moreHow do I choose the right type of bearing for my application?
Start with the load and how it’s applied. You need to know if you’re dealing with radial loads, axial loads, or a mix of both. Then look at speed, operating environment, and space constraints. For example, ball bearings are great for high speed and lighter loads, while roller bearings handle heavier loads but usually at lower speeds. If there’s contamination, moisture, or heat involved, you may need sealed bearings or specific materials. In most cases, the right choice comes down to matching load type, speed, and environment to the bearing design.
#673744
Brand
Dodge
Model
P2B-SCED-104
#792188
Brand
Dodge
Model
128353
#122519
Brand
Dodge
Model
LD-20X12-TUFR
#792190
Brand
Dodge
Model
128355
| Brand | Turck |
| Model | BI5-P18-AZ3X-B2331 |
| Brand | Sunex Tools |
| Model | 991307 |
| Brand | MRO Supply |
| Model | D103798 |
| Brand | Bondhus |
| Model | 31809 |
SKU: 126843
Replacement pillow block bearing
I ordered 2 Dodge Pillow block bearings to replace replace a failed bearing on my chipper and to replace a second bearing as a precaution. I received the both bearings promptly, but discovered that the failed bearing also damaged it's housing. Since the housing without a bearing doesn't seem to be readily available, I requested to return the one bearing and replace it with the complete pillow (housing with bearing). Since I was getting an entirely different part, MROSupply customer support suggested that I get a full refund for the bearing and place a new order for the pillow block (housing with bearing). I have received the pillow block and am waiting for the refund which I expect to receive very soon.
Read moreSKU: 115894
Excellent
We recently purchased a 30-year old hydroseeder and have no manuals or parts diagrams for it. The manufacturer is since out of business and there is very limited information on line. The most critical part we needed was a Dodge part. The original part was clearly marked with the Dodge name and part number. MRO was quickly able to identify the replacement part and we had in hand in two days. Perfect fit. Thank you MRO Supply for helping make our machine functional.
Read moreItem must be unused and undamaged, in it's orginal package. For Dodge there is typically a 10% + $30 US re-stocking fee, although it may vary from case to case. Re-packing fees may apply. Re-stocking fee applies bor both returns for credit and return for exchange.
Warranty is redeemed directly with manufacturer. If your item was damaged during usage, please let us know and we will help you get in touch with your nearest service center, they will guide you about the steps to follow to redeem the manufacturer's warranty.
For further information on our returns/warranty policy, please visit:
https://www.mrosupply.com/page/returnwarranty-policy/