We never sell your data to third parties
Image for Illustration purposes only. Actual product may vary
Dodge 136773 P2B-SCEZ-012-SHSS E-Z Kleen two-bolt pillow block bearing with 3/4" bore, stainless steel housing and insert, 65-degree set screw locking, QuadGuard seals. 204 series, standard duty, non-expansion design for washdown applications. 3/4" bore Pillow Block 2-Bolt Ball Bearing with Set Screw locking used in Washdown applications
MODEL P2B-SCEZ-012-SHSS
Contact supplier for technical support on: +1-864-284-5700
$221.94 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable: See conditions
Application
Washdown
Ball bearing series
204 series
Base to center height
1.3100 in, 33.274 mm
Bearing type
Ball, ball
Bolt Diameter
0.3750 in
Bolt to bolt max
4.1900 in, 106.426 mm
Bolt to bolt min
3.3800 in, 85.852 mm
Bore
3/4 in
Bore length
1.2300 in, 31.242 mm
Duty
Standard Duty
Expansion
No
Expansion capability
Non-expansion (fixed)
Greasable
Yes
High temp
No
Housing
Stainless
Housing construction
Solid
Housing material
Stainless steel
Housing option
Stainless steel
Housing type
Two-bolt pillow block
I.D.
3/4
Insert material
Stainless steel
Insert option
Stainless steel
Insert type
Ball Bearing
Locking
Set screw
Lubrication type
Grease
Relubrication
Yes
Rolling element
Standard duty ball
Seal option
QuadGuard seals with flingers
Sensor ready
Adapter required
Shaft attachment
Setscrew
Shaft diameter
0.7500 in
Standoff housing
No
Suitable for high temperature
No
Suitable for washdown
Yes
Type
Pillow block 2-Bolt
- Housing Type: Two-bolt pillow block, stainless steel construction
- Bore Diameter: 3/4" (19.05mm)
- Locking System: 65-degree set screw for maximum holding power
- Product Line: E-Z Kleen corrosion-resistant series
- Materials: Stainless steel housing with stainless steel insert (SHSS)
- Duty Rating: Standard duty with QuadGuard seal system
- Bearing Series: 204 series ball bearing
- Expansion Type: Non-expansion (fixed) bearing
- Applications: Ideal for washdown environments, food processing, and corrosive conditions requiring full stainless construction
How do I choose the right type of bearing for my application?
Start with the load and how it’s applied. You need to know if you’re dealing with radial loads, axial loads, or a mix of both. Then look at speed, operating environment, and space constraints. For example, ball bearings are great for high speed and lighter loads, while roller bearings handle heavier loads but usually at lower speeds. If there’s contamination, moisture, or heat involved, you may need sealed bearings or specific materials. In most cases, the right choice comes down to matching load type, speed, and environment to the bearing design.
#791390
Brand
Dodge
Model
P2B-SCEZ-012-SHSS
#132955
Brand
Dodge
Model
P2B-SCEZ-012-SHCR
#5003634
Brand
Dodge
Model
F2B-SCEZ-012-SHSS-FFS
#791630
Brand
Dodge
Model
F2B-SCEZ-012-PSS
#791631
Brand
Dodge
Model
F4B-SCEZ-012-PSS
| Brand | MRO Supply |
| Model | 3301-61-10-08 |
| Brand | MRO Supply |
| Model | 1901-32-M12 |
| Brand | WorldWide Electric |
| Model | NATE2-18-56CB |
| Brand | MRO Supply |
| Model | 2406-32-16-SS |
Item must be unused and undamaged, in it's orginal package. For Dodge there is typically a 10% + $30 US re-stocking fee, although it may vary from case to case. Re-packing fees may apply. Re-stocking fee applies bor both returns for credit and return for exchange.
Warranty is redeemed directly with manufacturer. If your item was damaged during usage, please let us know and we will help you get in touch with your nearest service center, they will guide you about the steps to follow to redeem the manufacturer's warranty.
For further information on our returns/warranty policy, please visit:
https://www.mrosupply.com/page/returnwarranty-policy/