MROSupply Has Hundreds Of Brands, Millions Of Products, Including
Image for Illustration purposes only. Actual product may vary
MPYR-100 Smith-Trax Metric Idler Roller Plain Yoke Type
MODEL MPYR-100
Contact supplier for technical support on: 800-932-0076
$228.70 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $1
Select Quantity
Typically Ships in: 1 day
Returnable: See conditions
Bearing Type
TRB
Bore Diameter
30
Bore Diameter Tolerance
+0.00/-0.02
Dynamic Thrust Load Rating 500 hrs. 33 rpm.
25,600
Overall Width
56
Radial Basic Dynamic Rating 500 hrs. 33 rpm.
78,200
Roller O.D.
100
Roller O.D. Tolerance
+0.00/-0.02
Roller Width
54
Shoulder Length
1.0
Shoulder Width Or End Plate Diameter
57.20
SMITH Bearing Number
MPYR-100
Specifications
| Item Name: | Series MPYR Plain Yoke Style, Smith-Trax |
|---|---|
| Bearing Type: | TRB - Tapered Roller bearing |
| (D) Roller OD: | 100 mm |
| (B) Roller Width: | 54 mm |
| (A) Bore Diameter: | 30 mm |
| (W) Overall Width: | 56 mm |
| (R) Shoulder Width or End Plate Diameter: | 57.20 mm |
| Radial Basic Dynamic Rating 500 hrs.33 rpm.: | 78200 Newtons |
| Dynamic Thrust Load Rating 500 hrs.33 rpm.: | 25600 Newtons |
| Tol. Outside Diameter: | +0.00 -0.02 mm |
| Osbron P/N: | HPCA–100 |
| Brand | Jason Industrial |
| Model | 131.0M300 |
| Brand | Bestorq |
| Model | BB55 |
| Brand | Fenner Industrial Motion |
| Model | 4911065 |
| Brand | IKO Bearing |
| Model | DS20304 |
| Brand | Boston Gear |
| Model | 30243711 |
| Brand | INA Bearing |
| Model | GIKR14PW |
| Brand | Moline Bearing |
| Model | UCT 201-08 |
Disclaimer: The return policy information shown below is merely a copy of the text as stated in IDC-USA's Annual Return Policy.
File: http://documents.mrosupply.com/file_uploads/IDCreturnpolicy.pdf
ANNUAL RETURN POLICY PURPOSE: The purpose of IDC-USA’s Annual Return Policy is to allow IDC Distributors the opportunity to return salable stock merchandise of current design that may not have adequate “turns” and replace it with faster moving product.
ACCEPTANCE: IDC Owner-Distributors shall submit a return list to IDC-USA with all pertinent information as follows:
a. Product brand name
b. Quantity
c. IDC-USA’s product identification number
d. Corresponding distributor’s P.O. number or invoice number Acceptance of return shall be subject to IDC-USA inventory levels and manufacturer’s restrictions.
AUTHORIZATION: The return shall be audited and the IDC Owner-Distributor will receive an approved return list with a Return Material Authorization (RMA) number assigned to it. RETURN DATE: Each owner-distributor shall be assigned a month during which they shall be entitled to make a single annual return.
Product Qualification: All products returned must be:
a. On the current price list
b. In good resale condition
c. In the original packaging
d. Purchased from IDC-USA within 3 years of the return
e. Stock items only; no special order items
f. Only those items which have been approved
VALUE: The IDC Owner-Distributor shall receive a credit not to exceed 5% of the owner-distributor’s prior year annual purchases from the IDC Distribution Center. Credit received shall be the actual purchase price or price in effect at the time of the return, whichever is lowest, less applicable restocking charges. Additionally, all annual returns must have a minimum return value of $100.
RESTOCKING CHARGES: There will be a 15% restocking fee unless return is offset by a noncancelable order of equal value to be placed at the time of return. All items received that are not in their original box shall be subject to an additional 15% repackaging fee.
FREIGHT: Returns will be made freight prepaid by the IDC Owner-Distributor to the IDC Distribution Center. The packing slip and all cartons must reference the RMA number. The owner-distributor will be notified of any items received that do not qualify as set forth above. Those items will not be credited and shall be scrapped unless the IDC Owner-Distributor directs otherwise and assumes any additional transportation charges.