Pallets and truckload of masks available 7.5c/6c Call Matt for details 323-219-6472                          Regular Customer Service can be reached for all other matters at 888-671-2883

Categories

Add products to your shopping cart

#1132900

5206SBZZ

Image for Illustration purposes only. Actual product may vary

MRC 5206SBZZ DOUBLE ROW BALL BRGS

View additional description
  • Typically ships in: 1 day
  • Weight: 0.7 lb

$64.25 Each

Select Quantity

Unit of measure: each

Returnable: See conditions

Payment methods:

Return policy

Item must be unused.

Item must be in it's original package.

Product's availability

State of California Proposition 65 Product Warning

Return policy

Item must be unused.

Item must be in it's original package.

Product's availability

State of California Proposition 65 Product Warning

Nov. 4, 2018

Spalling is progressive and will easily proceed from further operations. In many cases, the problem is caused by elevated levels of vibration which signifies abnormality.

Read More

 

Additional Description

Item Details
Manufacturer: MRC Bearing Service
Weight: 0.68 lbs.
Product Name: 5200-C, 5200-SB Light Series Bearing
Description: 30 mm ID x 62 mm OD x 15/16" Wide; Double Sealed; No Snap Ring; Standard Capacity; Double Row Ball Bearing
Specifications
Inch/Metric Metric Bore Bore Type Round Bore
I.D. 30 mm O.D. [Min]  
O.D. [Max]   O.D. 62 mm
Width [Min]   Width [Max]  
Width 23 13/16 mm Enclosure Double Sealed
Rows of Balls Double Material Steel
O.D. Type Straight Bearing Type Angular Contact
Precision Standard Radial Internal Clearance Specification Normal Clearance
Ambient Temperature Range [Min]   Ambient Temperature Range [Max]  
Ball Material Steel Cage Type Metal
Capacity Standard Capacity Contact Angle 30°
Guide Type   Lubrication  
Outer Ring Width 15/16 in Precision Level Standard (ABEC 1)
Preload Level None Seal Material Rubber
Seal Type Contact Seals Seal Width  
Dynamic Load Rating 6430 lbf Static Load Rating [Max] 4590 lbf
Ball Dia.   Bearing Design  
Bore B   Cage Material Steel
Collar No.   Collar O.D.  
Collar Width   Corner Radius [Min]  
Eccentric Collar Offset   Fillet Radius 1 mm
Flange O.D. [Max]   Flange O.D.  
Flange Width [Max]   Flange Width  
Flush Ground   Housing Shoulder Diameter [Min]  
Housing Shoulder Diameter [Max]   Housing Shoulder Diameter  
Industry Standard Part #   Inner Ring O.D.  
Inner Ring Offset   Inner Ring Width 15/16 in
Internal Design   Limiting Speed  
Limiting Speed - Grease 7000 rpm Limiting Speed - Oil 9500 rpm
Limiting Speed - Sealed 7000 rpm Locking Device No Locking Device
Lube Hole Center   Lubricant Chevron SRI-2
Misalignment Range   No. in Set Single Bearing
No. of Balls   O.D. (B)  
Outer Ring   Outer Ring Inner Diameter  
Outer Ring Size   Peak Running Torque (mg-mm)  
Peak Starting Torque (mg-mm)   Pre Lubricant  
Preload Amount   Radial Internal Clearance Normal
Radial Load Rating [Max]   Radial Rigidity (lbf/µm)  
Reference Speed   Seal O.D.  
Seal Protection Width   Seating Washer  
Series   Set Screw Offset  
Set Screw Size   Shaft Shoulder Diameter [Min]  
Shaft Tolerance   Snap Ring No Snap Ring
Snap Ring O.D.   Snap Ring Offset  
Snap Ring Thickness   Special Features  
Stamping   Static Thrust Load Rating [Max]  
Temperature Range [Min] -22 °F Temperature Range [Max] 250 °F
Use With      
Product Information
Applications
  • Recommended for applications where single-row bearings are inadequate, but radial loads are not so great as to suggest a filling-notch bearing
  • Bearings will take heavy radial loads and axial loads equally in either direction
Features
  • Double-row ball bearings have contact angles that converge outside the bearing, thereby increasing resistance to misalignment
  • No filling notches
  • Fully meets the requirements of American Petroleum Institute Specification 610
  • Both the inner and outer rings have closure grooves
  • One-piece, heat-treated steel for maximum retention; snapped into place after the full quota of balls has been introduced between the inner and outer ring

Specifications:

Locking None
I.D. 1.181
Cage Metal
O.D. 2.441
Bearing Type Angular Contact
Enclosure Double Sealed