Categories

Add products to your shopping cart

#1132940

5209CG

Image for Illustration purposes only. Actual product may vary

MRC 5209CG DOUBLE ROW BALL BRGS

View additional description
  • Typically ships in: 1 day
  • Weight: 1.6 lb

$82.51 Each

Select Quantity

Unit of measure: each

Returnable: See conditions

Payment methods:

Nov. 4, 2018

Temperatures in excess of 400°F can easily anneal the ball and ring materials. The effect is loss of bearing hardness and ultimately reducing its capacity to run optimally. In extreme cases, the balls and the rings will get deformed. The high temperature could also damage or degrade the lubricant.

Read More

 

Additional Description

Item Details
Manufacturer: MRC Bearing Service
Weight: 1.618 lbs.
Product Name: 5200-C, 5200-SB Light Series Bearing
Description: 45 mm ID x 85 mm OD x 1 3/16" Wide; Open; With Snap Ring; Standard Capacity; Double Row Ball Bearing
Specifications
Inch/Metric Metric Bore Bore Type Round Bore
I.D. 45 mm O.D. [Min]  
O.D. [Max]   O.D. 85 mm
Width [Min]   Width [Max]  
Width 30.1625 mm Enclosure Open
Rows of Balls Double Material Steel
O.D. Type Straight w/ Snap Ring Bearing Type Angular Contact
Precision Standard Radial Internal Clearance Specification Normal Clearance
Ambient Temperature Range [Min]   Ambient Temperature Range [Max]  
Ball Material Steel Cage Type Metal
Capacity Standard Capacity Contact Angle 30°
Guide Type   Lubrication  
Outer Ring Width 1 3/16 in Precision Level Standard (ABEC 1)
Preload Level None Seal Material None
Seal Type Unsealed Seal Width  
Dynamic Load Rating 11000 lbf Static Load Rating [Max] 8770 lbf
Ball Dia.   Bearing Design  
Bore B   Cage Material Steel
Collar No.   Collar O.D.  
Collar Width   Corner Radius [Min]  
Eccentric Collar Offset   Fillet Radius 1 mm
Flange O.D. [Max]   Flange O.D.  
Flange Width [Max]   Flange Width  
Flush Ground   Housing Shoulder Diameter [Min]  
Housing Shoulder Diameter [Max]   Housing Shoulder Diameter  
Industry Standard Part #   Inner Ring O.D.  
Inner Ring Offset   Inner Ring Width 1 3/16 in
Internal Design   Limiting Speed  
Limiting Speed - Grease 5000 rpm Limiting Speed - Oil 6700 rpm
Limiting Speed - Sealed 5000 rpm Locking Device No Locking Device
Lube Hole Center   Lubricant Oil Preservative
Misalignment Range   No. in Set Single Bearing
No. of Balls   O.D. (B)  
Outer Ring   Outer Ring Inner Diameter  
Outer Ring Size   Peak Running Torque (mg-mm)  
Peak Starting Torque (mg-mm)   Pre Lubricant  
Preload Amount   Radial Internal Clearance Normal
Radial Load Rating [Max]   Radial Rigidity (lbf/µm)  
Reference Speed   Seal O.D.  
Seal Protection Width   Seating Washer  
Series   Set Screw Offset  
Set Screw Size   Shaft Shoulder Diameter [Min]  
Shaft Tolerance   Snap Ring With Snap Ring
Snap Ring O.D.   Snap Ring Offset  
Snap Ring Thickness   Special Features  
Stamping   Static Thrust Load Rating [Max]  
Temperature Range [Min]   Temperature Range [Max] 450 °F
Use With      
Product Information
Applications
  • Recommended for applications where single-row bearings are inadequate, but radial loads are not so great as to suggest a filling-notch bearing
  • Bearings will take heavy radial loads and axial loads equally in either direction
Features
  • Double-row ball bearings have contact angles that converge outside the bearing, thereby increasing resistance to misalignment
  • No filling notches
  • Fully meets the requirements of American Petroleum Institute Specification 610
  • Both the inner and outer rings have closure grooves
  • One-piece, heat-treated steel for maximum retention; snapped into place after the full quota of balls has been introduced between the inner and outer ring

Specifications:

Locking None
I.D. 1.772
Cage Metal
O.D. 3.346
Bearing Type Angular Contact
Enclosure Open

Return policy

Item must be unused.

Item must be in it's original package.

Product's availability

State of California Proposition 65 Product Warning