Categories

Subtotal

View cart
Add products to your shopping cart
#1133076

Image for Illustration purposes only. Actual product may vary

MRC 5305CFG DOUBLE ROW BALL BRGS

$85.00 Each

NEW

  • Typically ships in: 1 day
  • Weight: 0.9 lb
  • Free shipping on orders over $20

Select Quantity

Additional Description

Item Details
Manufacturer: MRC Bearing Service
Weight: 0.864 lbs.
Product Name: 5300-C, 5300-SB Medium Series Bearing
Description: 25 mm ID x 62 mm OD x 1" Wide; Single Shield; With Snap Ring; Standard Capacity; Double Row Ball Bearing
Specifications
Inch/MetricMetric BoreBore TypeRound Bore
I.D.25 mmO.D. [Min]
O.D. [Max]O.D.62 mm
Width [Min]Width [Max]
Width25.4 mmEnclosureSingle Shield
Rows of BallsDoubleMaterialSteel
O.D. TypeStraight w/ Snap RingBearing TypeAngular Contact
PrecisionStandardRadial Internal Clearance SpecificationNormal Clearance
Ambient Temperature Range [Min]Ambient Temperature Range [Max]
Ball MaterialSteelCage TypeMetal
CapacityStandard CapacityContact Angle30°
Guide TypeLubrication
Outer Ring Width1 inPrecision LevelStandard (ABEC 1)
Preload LevelNoneSeal MaterialMetal
Seal TypeNon-Contact SealsSeal Width
Dynamic Load Rating6910 lbfStatic Load Rating [Max]4590 lbf
Ball Dia.Bearing Design
Bore BCage MaterialSteel
Collar No.Collar O.D.
Collar WidthCorner Radius [Min]
Eccentric Collar OffsetFillet Radius1 mm
Flange O.D. [Max]Flange O.D.
Flange Width [Max]Flange Width
Flush GroundHousing Shoulder Diameter [Min]
Housing Shoulder Diameter [Max]Housing Shoulder Diameter
Industry Standard Part #Inner Ring O.D.
Inner Ring OffsetInner Ring Width1 in
Internal DesignLimiting Speed
Limiting Speed - Grease7500 rpmLimiting Speed - Oil10000 rpm
Limiting Speed - Sealed7500 rpmLocking DeviceNo Locking Device
Lube Hole CenterLubricantOil Preservative
Misalignment RangeNo. in SetSingle Bearing
No. of BallsO.D. (B)
Outer RingOuter Ring Inner Diameter
Outer Ring SizePeak Running Torque (mg-mm)
Peak Starting Torque (mg-mm)Pre Lubricant
Preload AmountRadial Internal ClearanceC3
Radial Load Rating [Max]Radial Rigidity (lbf/µm)
Reference SpeedSeal O.D.
Seal Protection WidthSeating Washer
SeriesSet Screw Offset
Set Screw SizeShaft Shoulder Diameter [Min]
Shaft ToleranceSnap RingWith Snap Ring
Snap Ring O.D.Snap Ring Offset
Snap Ring ThicknessSpecial Features
StampingStatic Thrust Load Rating [Max]
Temperature Range [Min]Temperature Range [Max]
Use With  
Product Information
Applications
  • Used with heavy radial loads, two-directional thrust loads or a combination of both
  • Features
  • Double-row ball bearings have contact angles that converge outside the bearing, thereby increasing resistance to misalignment
  • No filling notches
  • Fully meets the requirements of American Petroleum Institute Specification 610
  • Both the inner and outer rings have closure grooves
  • One-piece, heat-treated steel for maximum retention; snapped into place after the full quota of balls has been introduced between the inner and outer ring
  • Specifications:

    Cage Metal
    I.D. 0.984
    Locking None
    O.D. 2.441
    Bearing Type Angular Contact
    Enclosure Single Shield

    Return policy

    Item must be unused.

    Item must be in it's original package.

    Product's availability

    State of California Proposition 65 Product Warning