Categories

Add products to your shopping cart

#1133175

5310MZZ

Image for Illustration purposes only. Actual product may vary

MRC 5310MZZ DOUBLE ROW BALL BRGS

  • Typically ships in: 1 day
  • Weight: 4.2 lb

$190.00 Each

Select Quantity

Unit of measure: each

Returnable: See conditions

Payment methods:

Nov. 4, 2018

Temperatures in excess of 400°F can easily anneal the ball and ring materials. The effect is loss of bearing hardness and ultimately reducing its capacity to run optimally. In extreme cases, the balls and the rings will get deformed. The high temperature could also damage or degrade the lubricant.

Read More

 

Additional Description

Item Details
Manufacturer: MRC Bearing Service
Weight: 4.203 lbs.
Product Name: 5300-M Medium Series Bearing
Description: 50 mm ID x 110 mm OD x 1 3/4" Wide; Double Sealed; No Snap Ring; Maximum Capacity; Double Row Ball Bearing
Specifications
Inch/Metric Metric Bore Bore Type Round Bore
I.D. 50 mm O.D. [Min]  
O.D. [Max]   O.D. 110 mm
Width [Min]   Width [Max]  
Width 44.45 mm Enclosure Double Sealed
Rows of Balls Double Material Steel
O.D. Type Straight Bearing Type Angular Contact
Precision Standard Radial Internal Clearance Specification Normal Clearance
Ambient Temperature Range [Min]   Ambient Temperature Range [Max]  
Ball Material Steel Cage Type Metal
Capacity Maximum Capacity Contact Angle 30°
Guide Type   Lubrication  
Outer Ring Width 1 3/4 in Precision Level Standard (ABEC 1)
Preload Level None Seal Material Rubber
Seal Type Contact Seals Seal Width  
Dynamic Load Rating 21400 lbf Static Load Rating [Max] 21400 lbf
Ball Dia.   Bearing Design  
Bore B   Cage Material Steel
Collar No.   Collar O.D.  
Collar Width   Corner Radius [Min]  
Eccentric Collar Offset   Fillet Radius 2 mm
Flange O.D. [Max]   Flange O.D.  
Flange Width [Max]   Flange Width  
Flush Ground   Housing Shoulder Diameter [Min]  
Housing Shoulder Diameter [Max]   Housing Shoulder Diameter  
Industry Standard Part #   Inner Ring O.D.  
Inner Ring Offset   Inner Ring Width 1 3/4 in
Internal Design   Limiting Speed  
Limiting Speed - Grease 4000 rpm Limiting Speed - Oil 5300 rpm
Limiting Speed - Sealed 4000 rpm Locking Device No Locking Device
Lube Hole Center   Lubricant Chevron SRI-2
Misalignment Range   No. in Set Single Bearing
No. of Balls   O.D. (B)  
Outer Ring   Outer Ring Inner Diameter  
Outer Ring Size   Peak Running Torque (mg-mm)  
Peak Starting Torque (mg-mm)   Pre Lubricant  
Preload Amount   Radial Internal Clearance Normal
Radial Load Rating [Max]   Radial Rigidity (lbf/µm)  
Reference Speed   Seal O.D.  
Seal Protection Width   Seating Washer  
Series   Set Screw Offset  
Set Screw Size   Shaft Shoulder Diameter [Min]  
Shaft Tolerance   Snap Ring No Snap Ring
Snap Ring O.D.   Snap Ring Offset  
Snap Ring Thickness   Special Features  
Stamping   Static Thrust Load Rating [Max]  
Temperature Range [Min] -22 °F Temperature Range [Max] 250 °F
Use With      
Product Information
Applications
  • Used with heavy radial loads, two-directional thrust loads or a combination of both
Features
  • Has filling notches on one side to permit assembling the maximum number of balls into the bearing
  • Contact angles converge outside the bearing
  • All inner and outer rings have closure grooves
  • Bearings may be equipped with seals, shields, snap rings or any combination
  • Has very heavy radial capacity
  • Thrust capacity in one direction, with the ability to accommodate light thrust load in the reversing direction
  • One-piece, heat-treated steel for maximum retention; snapped into place after the full quota of balls has been introduced between the inner and outer ring

Specifications:

Locking None
I.D. 1.969
Cage Metal
O.D. 4.331
Bearing Type Angular Contact
Enclosure Double Sealed

Return policy

Item must be unused.

Item must be in it's original package.

Product's availability

State of California Proposition 65 Product Warning