MROSupply Has Hundreds Of Brands, Millions Of Products, Including
Image for Illustration purposes only. Actual product may vary
MRC 7313PDU-BRZ Angular Contact Ball Bearings
MODEL 7313PDU-BRZ
Contact supplier for technical support on: 888 753 3477
$708.67 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $1
Select Quantity
Typically Ships in: 1 day
Returnable: See conditions
Bearing Type
Angular Contact
Cage
Metal
Enclosure
Open
I.D.
2.559
Locking
None
O.D.
5.512
Item Details
| Manufacturer: | MRC Bearing Service |
|---|---|
| Weight: | 5. 628 lbs. |
| Product Name: | 7300-PD Medium Series Duplex Ball Bearing |
| Description: | Single Row Angular Contact Bearing, 65 mm ID x 140 mm OD x 66 mm Wide, Open, Standard Precision (ABEC 1), Brass / Bronze Cage, Normal Clearance (C0), 40° Contact Angle, Duplex (2) Set |
Specifications
| Inch/Metric | Metric Bore |
|---|---|
| Bore Type | Round Bore |
| I. D. | 65 mm |
| O. D. [Min] | |
| O. D. [Max] | |
| O. D. | 140 mm |
| Width [Min] | |
| Width [Max] | |
| Width | 66 mm |
| Enclosure | Open |
| Rows of Balls | Single |
| Material | Steel |
| O. D. Type | Straight |
| Bearing Type | Angular Contact |
| Precision | Standard |
| Radial Internal Clearance Specification | Normal Clearance |
| Ambient Temperature Range [Min] | |
| Ambient Temperature Range [Max] | |
| Ball Material | Steel |
| Cage Type | Metal |
| Capacity | Standard Capacity |
| Contact Angle | 40° |
| Guide Type | |
| Lubrication | |
| Outer Ring Width | 66 mm |
| Precision Level | Standard (ABEC 1) |
| Preload Level | None |
| Seal Material | None |
| Seal Type | Unsealed |
| Seal Width | |
| Dynamic Load Rating | 24300 lbf |
| Static Load Rating [Max] | 19400 lbf |
| Ball Dia. | |
| Bearing Design | |
| Bore B | |
| Cage Material | Brass/Bronze |
| Collar No. | |
| Collar O. D. | |
| Collar Width | |
| Corner Radius [Min] | |
| Eccentric Collar Offset | |
| Fillet Radius | 2 mm |
| Flange O. D. [Max] | |
| Flange O. D. | |
| Flange Width [Max] | |
| Flange Width | |
| Flush Ground | |
| Housing Shoulder Diameter [Min] | |
| Housing Shoulder Diameter [Max] | |
| Housing Shoulder Diameter | |
| Industry Standard Part # | |
| Inner Ring O. D. | |
| Inner Ring Offset | |
| Inner Ring Width | 66 mm |
| Internal Design | Universal Mounting |
| Limiting Speed | |
| Limiting Speed - Grease | 4600 rpm |
| Limiting Speed - Oil | 6000 rpm |
| Limiting Speed - Sealed | |
| Locking Device | No Locking Device |
| Lube Hole Center | |
| Lubricant | Oil Preservative |
| Misalignment Range | |
| No. in Set | Duplex Set |
| No. of Balls | |
| O. D. (B) | |
| Outer Ring | |
| Outer Ring Inner Diameter | |
| Outer Ring Size | |
| Peak Running Torque (mg-mm) | |
| Peak Starting Torque (mg-mm) | |
| Pre Lubricant | |
| Preload Amount | |
| Radial Internal Clearance | Normal |
| Radial Load Rating [Max] | |
| Radial Rigidity (lbf/µm) | |
| Reference Speed | |
| Seal O. D. | |
| Seal Protection Width | |
| Seating Washer | |
| Series | |
| Set Screw Offset | |
| Set Screw Size | |
| Shaft Shoulder Diameter [Min] | |
| Shaft Tolerance | |
| Snap Ring | No Snap Ring |
| Snap Ring O. D. | |
| Snap Ring Offset | |
| Snap Ring Thickness | |
| Special Features | |
| Stamping | |
| Static Thrust Load Rating [Max] | |
| Temperature Range [Min] | |
| Temperature Range [Max] | 450 °F |
| Use With | |
Product Information
MRC 7000-P Series bearings are similar in design to 7000 Series bearings, but the 7000-P Series bearings have features that give them a greatly increased thrust capacity. They are especially recommended for those applications where maximum thrust capacity is required. This heavy-duty angular contact bearing series is designed with an optimum ball complement and race groove depth and have a 40° contact angle 7000-P bearings are restricted to applications involving primarily thrust loads. They should not be used where the bearing will be subjected to radial load exclusively, or combined radial and thrust load where the radial load is predominant. Furnished in one-piece machined bronze, phenolic composition or special material riding ground OD of inner ring. 7300-P Medium Series bearings are available in bore sizes from 10mm o 200 mm. They can accommodate very heavy one-directional thrust loads, or combined radial and thrust loads where the thrust load is predominant.
SKU: 1133536
Great bearings, great price!
I am rebuilding an old Delta/Rockwell drill press and was having trouble finding the correct replacement bearings at a reasonable price from my usual go-to online dealers; from those that even had them available. Shipping times where reasonable. Competitively priced at time of purchase. Stock status was…
Read moreSKU: 1133538
Motor bearings
Of all the bearings I have purchased in the last 45 years, these look to be top quality.
Read moreSKU: 1133536
Great bearings, great price!
I am rebuilding an old Delta/Rockwell drill press and was having trouble finding the correct replacement bearings at a reasonable price from my usual go-to online dealers; from those that even had them available. Shipping times where reasonable. Competitively priced at time of purchase. Stock status was…
Read moreSKU: 1133538
Motor bearings
Of all the bearings I have purchased in the last 45 years, these look to be top quality.
Read more