We never sell your data to third parties
Image for Illustration purposes only. Actual product may vary
Dodge 136830 F4B-SCEZ-107-SHSS E-Z Kleen four-bolt flange bearing with 1-7/16" bore, 65 degree set screw locking, stainless steel housing and insert, 207 series. QuadGuard seal, corrosion resistant for washdown applications. 1-7/16" bore 4-Bolt Flange Ball Bearing with Set Screw locking used in Washdown applications
MODEL F4B-SCEZ-107-SHSS
Contact supplier for technical support on: +1-864-284-5700
$335.34 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable: See conditions
Application
Washdown
Ball bearing series
207 series
Bearing type
Ball, ball
Bolt Diameter
0.5000 in
Bolt to bolt max
3.6300 in, 92.202 mm
Bolt to bolt min
3.6300 in, 92.202 mm
Bore
1 7/16 in
Bore length
1.7100 in, 43.434 mm
Duty
Standard Duty
Expansion
No
Expansion capability
Non-expansion (fixed)
Greasable
Yes
High temp
No
Housing
Cast iron
Housing construction
Solid
Housing material
Stainless steel
Housing option
Stainless steel
Housing type
Four-bolt flange
I.D.
70 mm
Insert material
Stainless steel
Insert option
Stainless steel
Insert type
Ball Bearing
Locking
Set screw
Lubrication type
Grease
Relubrication
Yes
Rolling element
Standard duty ball
Seal option
QuadGuard seals with flingers
Sensor ready
Adapter required
Shaft attachment
Setscrew
Shaft diameter
1.4375 in
Standoff housing
No
Suitable for high temperature
No
Suitable for washdown
Yes
Type
4-bolt flange
- Housing Type: Four-bolt flange mount for surface mounting applications
- Bore Diameter: 1-7/16 inch (36.512mm)
- Locking Type: 65 degree set screw locking mechanism
- Housing Material: Stainless steel cast housing for maximum corrosion resistance
- Insert Material: Stainless steel corrosion resistant insert
- Product Line: E-Z Kleen series for washdown and corrosive environments
- Bearing Series: 207 series ball bearing
- Seal Type: QuadGuard seal with stainless rubberized flinger
- Expansion Type: Non-expansion (fixed) configuration
- Applications: Food processing, washdown environments, chemical processing where corrosion resistance is critical
SKU: 126843
Replacement pillow block bearing
I ordered 2 Dodge Pillow block bearings to replace replace a failed bearing on my chipper and to replace a second bearing as a precaution. I received the both bearings promptly, but discovered that the failed bearing also damaged it's housing. Since the housing without a bearing doesn't seem to be readily available, I requested to return the one bearing and replace it with the complete pillow (housing with bearing). Since I was getting an entirely different part, MROSupply customer support suggested that I get a full refund for the bearing and place a new order for the pillow block (housing with bearing). I have received the pillow block and am waiting for the refund which I expect to receive very soon.
Read moreHow do I choose the right type of bearing for my application?
Start with the load and how it’s applied. You need to know if you’re dealing with radial loads, axial loads, or a mix of both. Then look at speed, operating environment, and space constraints. For example, ball bearings are great for high speed and lighter loads, while roller bearings handle heavier loads but usually at lower speeds. If there’s contamination, moisture, or heat involved, you may need sealed bearings or specific materials. In most cases, the right choice comes down to matching load type, speed, and environment to the bearing design.
#791303
Brand
Dodge
Model
P2B-SCEZ-107-PSS
#132948
Brand
Dodge
Model
F4B-DLEZ-107-SHCR
#132908
Brand
Dodge
Model
P2B-SCEZ-107-PCR
#5903850
Brand
Dodge
Model
P2B-SCFS-107-SHFS
#5904736
Brand
Dodge
Model
P2B-DLEZ-107-SHCR-DRY
SKU: 126843
Replacement pillow block bearing
I ordered 2 Dodge Pillow block bearings to replace replace a failed bearing on my chipper and to replace a second bearing as a precaution. I received the both bearings promptly, but discovered that the failed bearing also damaged it's housing. Since the housing without a bearing doesn't seem to be readily available, I requested to return the one bearing and replace it with the complete pillow (housing with bearing). Since I was getting an entirely different part, MROSupply customer support suggested that I get a full refund for the bearing and place a new order for the pillow block (housing with bearing). I have received the pillow block and am waiting for the refund which I expect to receive very soon.
Read moreItem must be unused and undamaged, in it's orginal package. For Dodge there is typically a 10% + $30 US re-stocking fee, although it may vary from case to case. Re-packing fees may apply. Re-stocking fee applies bor both returns for credit and return for exchange.
Warranty is redeemed directly with manufacturer. If your item was damaged during usage, please let us know and we will help you get in touch with your nearest service center, they will guide you about the steps to follow to redeem the manufacturer's warranty.
For further information on our returns/warranty policy, please visit:
https://www.mrosupply.com/page/returnwarranty-policy/