We never sell your data to third parties
NTN F-UC208D1/LP03 is a stainless steel insert bearing with a 40 mm bore, double sealed, and set screw locking. Features a wide inner ring and spherical outer diameter for self-alignment in mounted housing units. Suitable for food-grade and corrosive environments.
MODEL F-UC208D1/LP03
$290.99 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable:No
B (in)
1.9370
Basic Outer Ring
208
Bearing Type
Ball Bearing
Bore Type
Round
Bore type
Round
C (in)
0.8268
D (in)
3.1496
d (in)
1.5748
d4
2.0866 in
DS
M8x1
Dynamic Load Rating
6550 lbf
Dynamic load rating
6550 lbf
Enclosure
Double Sealed
F (in)
0.1772
G (in)
0.3150
I.D.
1.5748 in
Limiting Speed - Grease
5000 RPM
Limiting speed - grease
5000 RPM
Locking Device
Set Screw
Locking device
Set screw
Lubrication
Relubricatable
Material
Stainless steel
O.D.
3.1496 in
Operating Temperature Range
-40 to 250 °F
Operating temperature range
-40 to 250 ºF
Performance
Standard Duty
Precision Rating
ISO Class 0
Precision rating
ISO class 0
r (in)
0.0591
S
0.7480 in
S1
1.1890 in
Seal Material
Nitrile Rubber
Seal material
Nitrile rubber
Seal Type
Contact
Seal type
Contact
Static Load Rating
4000 lbf
Static load rating
4000 lbf
Type
Insert Bearing
Technical Specifications
Type | Insert Bearing |
|---|---|
Bore Type | Round |
Bearing Type | Ball Bearing |
Material | Stainless Steel |
Limiting Speed - Grease | 5000 RPM |
Seal Type | Contact |
Seal Material | Nitrile Rubber |
Precision Rating | ISO Class 0 |
Performance | Standard Duty |
Locking Device | Set Screw |
Lubrication | Relubricatable |
Basic Outer Ring | 208 |
Static Load Rating | 4000 lbf17800 N17.80 kN |
Dynamic Load Rating | 6550 lbf29100 N29.10 kN |
Enclosure | Double Sealed |
Operating Temperature Range | -40 to 250 F-40 to 120 C |
Dimensional Specifications
| |
d | 1.5748 in40.000 mm |
|---|---|
D | 3.1496 in80.000 mm |
C | 0.8268 in21.000 mm |
B | 1.9370 in49.200 mm |
r | 0.0591 in1.500 mm |
ds | M8x1 |
G | 0.3150 in8.000 mm |
d4 | 2.0866 in53.000 mm |
S1 | 1.1890 in30.200 mm |
S | 0.7480 in19.000 mm |
F | 0.1772 in4.500 mm |
How do I choose the right type of bearing for my application?
Start with the load and how it’s applied. You need to know if you’re dealing with radial loads, axial loads, or a mix of both. Then look at speed, operating environment, and space constraints. For example, ball bearings are great for high speed and lighter loads, while roller bearings handle heavier loads but usually at lower speeds. If there’s contamination, moisture, or heat involved, you may need sealed bearings or specific materials. In most cases, the right choice comes down to matching load type, speed, and environment to the bearing design.
| Brand | McGill Bearing |
| Model | SB 22316 C3 W33 TS VA |