We never sell your data to third parties
NTN AEL209-112 bearing insert with eccentric locking collar, narrow inner ring, and spherical outer diameter. Bore size 1-3/4 inch (44.45 mm). Designed for use in mounted bearing housings where eccentric collar locking is required. Suitable for light to medium-duty industrial applications.
MODEL AEL209-112
$76.24 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable:No
Axial Static Load Rating
4586 lbf
Axial static load rating
4586 lbf
B (in)
1.7200
B1
1.7205 in
B5
0.7205 in
Ball Material
Through Hardened Steel
Ball material
Through hardened steel
Basic Outer Ring
209
Bearing Type
Ball Bearing
Bore Type
Cylindrical
Bore type
Cylindrical
C (in)
1.7200
Collar Number
C-112#BCA
Configuration
One
d (in)
1 3/4
D (in)
3.3460
d3
2.5000 in
DS
3/8-24 UNF
Dynamic Load Rating
7307 lbf
Dynamic load rating
7307 lbf
Enclosure
Full Contact Seal - Both Sides
G (in)
0.2677
Height
3.347
Housing Width
0 in
Housing width
0 in
I.D.
1.75 in
Length
3.347
Limiting Speed - Grease
3450 RPM
Limiting speed - grease
3450 RPM
Locking Device
Eccentric Locking Collar
Locking device
Eccentric locking collar
Locking Device Part Number
EL209-112
Lubrication
Non-relubricatable
Material
Through hardened steel
Number of Holes
0
Number of holes
0
O.D.
3.3465 in
Operating Temperature Range
-40 to 250 °F
Operating temperature range
-40 to 250 ºF
Outside Ring Type
Spherical OD
Performance
Standard Duty
r (in)
0.0591
Radial Dynamic Load Rating
7306 lbf
Radial Internal Clearance
CN
Radial internal clearance
CN
S
0.4331 in
S1
1.2874 in
Seal Material
Nitrile Rubber
Seal material
Nitrile rubber
Seal Type
Contact
Seal type
Contact
Static Load Rating
4586 lbf
Static load rating
4586 lbf
Total Length
0.0000 in
Total length
0.0000 in
Type
Insert Bearing
Technical Specifications
Type | Insert Bearing |
Bore Type | Round |
Bearing Type | Ball Bearing |
Material | Through Hardened Steel |
Ball Material | Steel |
Limiting Speed - Grease | 3500 RPM |
Seal Type | Contact |
Seal Material | Nitrile Rubber |
Performance | Standard Duty |
Configuration | One |
Locking Device | Eccentric Locking Collar |
Locking Device Part Number | EL209-112 |
Lubrication | Non-Relubricatable |
Collar Number | C-112#BCA |
Basic Outer Ring | 209 |
Radial Internal Clearance | CN |
Static Load Rating | 4600 lbf20400 N20.40 kN |
Dynamic Load Rating | 7300 lbf32500 N32.50 kN |
Enclosure | Double Sealed |
Weight | 1.625 lb0.737 kg |
Operating Temperature Range | -40 to 250 F-40 to 120 C |
Dimensional Specifications
| |
d | 1.75 in44.450 mm |
D | 3.3465 in85.000 mm |
C | 0.7480 in19.000 mm |
B | 1.1890 in30.200 mm |
B1 | 1.7205 in43.700 mm |
r | 0.0591 in1.500 mm |
ds | 3/8-24 UNF |
G | 0.2677 in6.800 mm |
d3 | 2.5000 in63.500 mm |
B5 | 0.7205 in18.300 mm |
S1 | 1.2874 in32.700 mm |
S | 0.4331 in11.000 mm |
How do I choose the right type of bearing for my application?
Start with the load and how it’s applied. You need to know if you’re dealing with radial loads, axial loads, or a mix of both. Then look at speed, operating environment, and space constraints. For example, ball bearings are great for high speed and lighter loads, while roller bearings handle heavier loads but usually at lower speeds. If there’s contamination, moisture, or heat involved, you may need sealed bearings or specific materials. In most cases, the right choice comes down to matching load type, speed, and environment to the bearing design.
| Brand | Bestorq |
| Model | 8/8VK1250 |
| Brand | Electra/Grove Gear |
| Model | GR8130536.10 |
| Brand | PEER Bearing |
| Model | FHP208-24G |
| Brand | Toshiba |
| Model | 0154XDSC41A-P |