We never sell your data to third parties
Image for Illustration purposes only. Actual product may vary
SKF 1726206-2RS1 is a 1-1/6 in bore deep groove ball bearing with double contact seals (NBR) both sides. The bearing features a pressed steel cage and is pre-lubricated with standard grease. Suitable for electric motors, pumps, and general industrial machinery.
MODEL 1726206-2RS1
$70.91 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable:No
Application
For agricultural applications
Basic Dynamic Load Rating
19.5 kN
Basic Static Load Rating
11.2 kN
Bearing Material
Bearing steel
Bore Diameter
30 mm
Bore Type
Cylindrical
Cage
Non-metallic
Coating
Without
Dimension Type
Metric
Inner Diameter (mm)
30.000
Inner Ring Extension
None (standard ring)
Inner Ring Retaining Feature
Interference fit
Inner Ring Width
16 mm
Limiting Speed
7500 r/min
Lubricant
Grease
Material/Treatment
Bearing steel
O.D. (in)
2 4/9
Outer Diameter (mm)
62.000
Outer Ring Type
Spherical
Outer Ring Width
16 mm
Outside Diameter Type
Spherical
Pack Height
67 mm
Pack Length
65 mm
Pack Width
22 mm
Relubrication Feature
Without
Rolling Elements
Balls
Rubber Seating Ring
Without
Seal Type
Contact
Sealing
Seal on both sides
Sealing Type
Contact, RS1
Total Width
16 mm
Width (mm)
16.000
How do I choose the right type of bearing for my application?
Start with the load and how it’s applied. You need to know if you’re dealing with radial loads, axial loads, or a mix of both. Then look at speed, operating environment, and space constraints. For example, ball bearings are great for high speed and lighter loads, while roller bearings handle heavier loads but usually at lower speeds. If there’s contamination, moisture, or heat involved, you may need sealed bearings or specific materials. In most cases, the right choice comes down to matching load type, speed, and environment to the bearing design.
| Brand | Wichita Clutch |
| Model | 30109636 |
| Brand | SIEGMA |
| Model | 6IK140RGU-HFT/6GU180KB |
Disclaimer: The return policy information shown below is merely an excerpt from SKF's General Conditions of Sale.
RETURN OF GOODS FOR CREDIT
Goods will not be accepted for return without prior written approval from SKF. The return freight must be prepaid by the Buyer. Unless return of Goods is due to Supplier error, Goods returned will be subject to a credit service fee of $25.00 or 15% of the credit value, whichever is greater. An additional service fee may apply is further inspection is required at the discretion of SKF