We never sell your data to third parties
NTN UELS205-015LD1NR is a bearing insert with eccentric locking collar and wide inner ring. It features a 25 mm bore, cylindrical outer diameter, and single FKM/Viton seal. The insert includes a snap ring groove and is made of through hardened steel. Designed for industrial applications requiring secure shaft mounting and corrosion-resistant sealing.
MODEL UELS205-015LD1NR
This vendor has a minimum order quantity of 2. Order minimum ($) may be applied. Add desired QTY to cart and proceed to checkout to view minimum
$51.75 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Brand Minimum Order Quantity: 2
Typically Ships in: 1 day
Returnable:No
a (in)
0.1260
B (in)
1.3740
B1
1.7480 in
B5
0.5315 in
Ball Material
Steel
Ball material
Steel
Basic Outer Ring
205
Bearing Type
Ball Bearing
Bore Type
Round
Bore type
Round
C (in)
0.6693
Collar Number
EL205
D (in)
2.0472
d (in)
0.9375
D1
1.9579 in
D2
2.2795 in
d3
1.4961 in
DS
1/4-28 UNF
Dynamic Load Rating
3150 lbf
Dynamic load rating
3150 lbf
Enclosure
Double Sealed
F (in)
0.1614
f (in)
0.0591
G (in)
0.1890
I.D.
0.9375 in
Locking Device
Eccentric Locking Collar
Locking device
Eccentric locking collar
Lubrication
Relubricatable
Material
Through hardened steel
O.D.
2.0472 in
Operating Temperature Range
-40 to 250 °F
Operating temperature range
-40 to 250 ºF
Performance
Standard Duty
r (in)
0.0236
r1
0.0394 in
Radial Internal Clearance
CN
Radial internal clearance
CN
S
0.6890 in
S1
1.0591 in
Seal Material
Nitrile Rubber
Seal material
Nitrile rubber
Seal Type
Contact
Seal type
Contact
Static Load Rating
1760 lbf
Static load rating
1760 lbf
Type
Insert Bearing
Width
1.748
Technical Specifications
| Type | Insert Bearing |
|---|---|
| Bore Type | Round |
| Bearing Type | Ball Bearing |
| Material | Through Hardened Steel |
| Ball Material | Steel |
| Seal Type | Contact |
| Seal Material | Nitrile Rubber |
| Performance | Standard Duty |
| Locking Device | Eccentric Locking Collar |
| Lubrication | Relubricatable |
| Collar Number | EL205 |
| Basic Outer Ring | 205 |
| Radial Internal Clearance | CN |
| Static Load Rating | 1760 lbf7850 N7.85 kN |
| Dynamic Load Rating | 3150 lbf14000 N14.00 kN |
| Enclosure | Double Sealed |
| Operating Temperature Range | -40 to 250 F-40 to 120 C |
Dimensional Specifications
|
| |
| d | 0.9375 in23.813 mm |
|---|---|
| D | 2.0472 in52.000 mm |
| C | 0.6693 in17.000 mm |
| B | 1.3740 in34.900 mm |
| B1 | 1.7480 in44.400 mm |
| r | 0.0236 in0.600 mm |
| ds | 1/4-28 UNF |
| G | 0.1890 in4.800 mm |
| d3 | 1.4961 in38.000 mm |
| B5 | 0.5315 in13.500 mm |
| S1 | 1.0591 in26.900 mm |
| S | 0.6890 in17.500 mm |
| F | 0.1614 in4.100 mm |
| r1 | 0.0394 in1.000 mm |
| a | 0.1260 in3.200 mm |
| D1 | 1.9579 in49.730 mm |
| D2 | 2.2795 in57.900 mm |
| f | 0.0591 in1.500 mm |
How do I choose the right type of bearing for my application?
Start with the load and how it’s applied. You need to know if you’re dealing with radial loads, axial loads, or a mix of both. Then look at speed, operating environment, and space constraints. For example, ball bearings are great for high speed and lighter loads, while roller bearings handle heavier loads but usually at lower speeds. If there’s contamination, moisture, or heat involved, you may need sealed bearings or specific materials. In most cases, the right choice comes down to matching load type, speed, and environment to the bearing design.
| Brand | TB Woods |
| Model | FSH70-22-GC-HD-SS |
| Brand | WorldWide Electric |
| Model | PEWWE15-9-286T |
| Brand | Nord Gear |
| Model | SK02050AFH-100LP/4 CUS TW |
| Brand | Nord Gear |
| Model | SK3282ABG-100AP/4 CUS TF |
| Brand | Hubbell Wiring |
| Model | SNAP2182ALSC |
| Brand | Dixon Sanitary Fittings |
| Model | RP-BA-110-DA |
| Brand | Electra/Grove Gear |
| Model | PBQ7172-13.26-M5-B1 110058.00 |
| Brand | Nord Gear |
| Model | SK1SM63-50-140TC-RIGHT |