We never sell your data to third parties
Dodge 129191 P2B-GTB-106 two-bolt pillow block bearing with 1-3/8" bore and Grip Tight adapter mount locking. Standard duty cast iron housing with DualGuard seals, non-expansion (fixed) design for accurate shaft positioning in industrial applications. 1-3/8" bore Pillow Block 2-Bolt Ball Bearing with Grip Tight locking used in General Purpose applications
MODEL P2B-GTB-106
Contact supplier for technical support on: +1-864-284-5700
$158.88 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable: See conditions
Application
General Purpose
Base to center height
1.8100 in, 45.974 mm
Bearing type
Ball, ball
Bolt to bolt max
5.4400 in, 138.176 mm
Bolt to bolt min
4.6800 in, 118.872 mm
Bore
1 3/8 in
Bore length
1.7100 in, 43.434 mm
Duty
Standard Duty
Expansion
No
Expansion capability
Non-expansion (fixed)
Greasable
Yes
High temp
No
Housing construction
Solid
Housing material
Cast iron
Housing option
Cast iron
Housing type
Two-bolt pillow block
Insert material
Steel
Insert option
Bearing steel
Insert type
Ball Bearing
Locking
Grip tight
Lubrication type
Grease
Relubrication
Yes
Rolling element
Standard duty ball
Seal option
DualGuard seals with flingers
Sensor ready
Adapter required
Shaft attachment
Push-pull adapter
Shaft diameter
1.3750 in
Standoff housing
No
Suitable for high temperature
No
Suitable for washdown
No
Take-up frame size
LD-20,TS-250
Type
Pillow block 2-Bolt
- Housing Type: Two-bolt pillow block bearing
- Bore Diameter: 1-3/8" (34.925mm)
- Locking Type: Grip Tight adapter mount - 360° shaft contact, no shaft marring
- Housing Material: Cast iron
- Duty Rating: Standard duty
- Expansion Type: Non-expansion (fixed) - locates shaft position
- Seal Type: DualGuard seals with rubberized flingers
- Application: General industrial applications requiring precise shaft positioning without shaft damage
How do I choose the right type of bearing for my application?
Start with the load and how it’s applied. You need to know if you’re dealing with radial loads, axial loads, or a mix of both. Then look at speed, operating environment, and space constraints. For example, ball bearings are great for high speed and lighter loads, while roller bearings handle heavier loads but usually at lower speeds. If there’s contamination, moisture, or heat involved, you may need sealed bearings or specific materials. In most cases, the right choice comes down to matching load type, speed, and environment to the bearing design.
| Brand | Dichtomatik |
| Model | 36X68X10VSC-T-BX |
| Brand | Bestorq |
| Model | CX173 |
| Brand | NTN Bearing |
| Model | SUCPPL206-20FG1 |
Item must be unused and undamaged, in it's orginal package. For Dodge there is typically a 10% + $30 US re-stocking fee, although it may vary from case to case. Re-packing fees may apply. Re-stocking fee applies bor both returns for credit and return for exchange.
Warranty is redeemed directly with manufacturer. If your item was damaged during usage, please let us know and we will help you get in touch with your nearest service center, they will guide you about the steps to follow to redeem the manufacturer's warranty.
For further information on our returns/warranty policy, please visit:
https://www.mrosupply.com/page/returnwarranty-policy/