We never sell your data to third parties
Dodge 062178 P2B-SCM-208-NL two-bolt pillow block bearing with 2-1/2" bore, 65-degree set screw locking, medium duty cast iron housing, 214 series ball bearing insert, factory sealed no-lube design for maintenance-free operation. 2-1/2" bore Pillow Block 2-Bolt Ball Bearing with Set Screw locking used in General Purpose applications
MODEL P2B-SCM-208-NL
Contact supplier for technical support on: +1-864-284-5700
$332.67 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable:No
Application
General Purpose
Ball bearing series
214 series
Base to center height
3.0000 in, 76.2 mm
Bearing Series
214 series ball bearing insert
Bearing type
Ball, ball
Bolt Diameter
0.7500 in
Bolt to bolt max
8.5000 in, 215.9 mm
Bolt to bolt min
7.5000 in, 190.5 mm
Bore
2 1/2 in
Bore Diameter
2-1/2"
Bore length
2.5400 in, 64.516 mm
Duty
Medium duty
Expansion
No
Expansion capability
Non-expansion (fixed)
Expansion Type
Non-expansion (fixed)
Greasable
No
High temp
No
Housing construction
Solid
Housing material
Cast iron
Housing Material
Cast iron
Housing option
Cast iron
Housing type
Two-bolt pillow block
Insert material
Steel
Insert option
Bearing steel
Insert type
Ball Bearing
Locking
Set screw
Lubrication type
Grease
Max Speed
2000 RPM
Relubrication
No
Rolling element
Medium duty ball
Seal option
DualGuard seals with flingers
Sensor ready
Adapter required
Shaft attachment
Setscrew
Shaft diameter
2.5000 in
Standoff housing
No
Static load capacity
9838 lbf, 43761.604 N
Suitable for high temperature
No
Suitable for washdown
No
Take-up frame size
LD-45,TS-300
Type
Pillow block 2-Bolt
- Housing Type: Two-bolt pillow block cast iron housing
- Bore Diameter: 2-1/2" (63.5mm)
- Locking Type: 65-degree set screw medium duty
- Bearing Series: 214 series ball bearing insert
- Seal Design: No-Lube factory sealed, maintenance-free
- Housing Material: Cast iron with DualGuard seals
- Expansion Type: Non-expansion (fixed)
- Applications: Medium-duty industrial equipment, conveyors, pumps
How do I choose the right type of bearing for my application?
Start with the load and how it’s applied. You need to know if you’re dealing with radial loads, axial loads, or a mix of both. Then look at speed, operating environment, and space constraints. For example, ball bearings are great for high speed and lighter loads, while roller bearings handle heavier loads but usually at lower speeds. If there’s contamination, moisture, or heat involved, you may need sealed bearings or specific materials. In most cases, the right choice comes down to matching load type, speed, and environment to the bearing design.
#123060
Brand
Dodge
Model
066217
#128789
Brand
Dodge
Model
P2B-SCM-65M
#126509
Brand
Dodge
Model
046217
#131804
Brand
Dodge
Model
P2B-SCM-208-NL
#126884
Brand
Dodge
Model
F2B-VSC-200L-NL
#123692
Brand
Dodge
Model
P2B-SCM-208
#269567
Brand
NTN Bearing
Model
UCP213-208D1
#269413
Brand
NTN Bearing
Model
UCPX-2.1/2
#2363906
Brand
Link-Belt
Model
10433704
| Brand | Jason Industrial |
| Model | 7/5V1060 |
Item must be unused and undamaged, in it's orginal package. For Dodge there is typically a 10% + $30 US re-stocking fee, although it may vary from case to case. Re-packing fees may apply. Re-stocking fee applies bor both returns for credit and return for exchange.
Warranty is redeemed directly with manufacturer. If your item was damaged during usage, please let us know and we will help you get in touch with your nearest service center, they will guide you about the steps to follow to redeem the manufacturer's warranty.
For further information on our returns/warranty policy, please visit:
https://www.mrosupply.com/page/returnwarranty-policy/