We never sell your data to third parties
Dodge 128725 P2B-DLB-102 two-bolt pillow block bearing with 1-1/8" bore, concentric collar locking, cast iron housing, standard duty ball bearing, non-expansion design, DualGuard seals, 206 series for general industrial applications. 1-1/8" bore Pillow Block 2-Bolt Ball Bearing with Concentric Collar locking used in General Purpose applications
MODEL P2B-DLB-102
Contact supplier for technical support on: +1-864-284-5700
$138.44 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable:No
Application
General Purpose
Ball bearing series
206 series
Base to center height
1.5600 in, 39.624 mm
Bearing Series
206 series ball bearing
Bearing type
Ball, ball
Bolt Diameter
0.5000 in
Bolt to bolt max
5.0000 in, 127.0 mm
Bolt to bolt min
4.2500 in, 107.95 mm
Bore
1 1/8 in
Bore Diameter
1-1/8"
Bore length
1.5600 in, 39.624 mm
Duty
Standard Duty
Duty Rating
Standard duty
Expansion
No
Expansion capability
Non-expansion (fixed)
Greasable
Yes
High temp
No
Housing construction
Solid
Housing material
Cast iron
Housing option
Cast iron
Housing type
Two-bolt pillow block
Insert material
Steel
Insert option
Bearing steel
Insert type
Ball Bearing
Locking
Concentric collar
Locking Mechanism
Concentric collar (DLB designation)
Lubrication type
Grease
Max Speed
5500 rpm
Maximum Speed
5, 500 RPM
Relubrication
Yes
Rolling element
Standard duty ball
Seal option
DualGuard seals with flingers
Sealing
DualGuard seals
Sensor ready
Adapter required
Shaft attachment
Clamp collar
Shaft diameter
1.1250 in
Standoff housing
No
Static load capacity
2538 lbf, 11289.586 N
Suitable for high temperature
No
Suitable for washdown
No
Take-up frame size
LD-20,TS-250
Type
Pillow block 2-Bolt
SKU: 117408
P90 coupler
These where a perfect match saved me time and money by getting them fro you guys
Read moreHow do I choose the right type of bearing for my application?
Start with the load and how it’s applied. You need to know if you’re dealing with radial loads, axial loads, or a mix of both. Then look at speed, operating environment, and space constraints. For example, ball bearings are great for high speed and lighter loads, while roller bearings handle heavier loads but usually at lower speeds. If there’s contamination, moisture, or heat involved, you may need sealed bearings or specific materials. In most cases, the right choice comes down to matching load type, speed, and environment to the bearing design.
#5903862
Brand
Dodge
Model
P2B-SCFS-104-SHFS
#127074
Brand
Dodge
Model
P2B-SCEZ-107-P
#122519
Brand
Dodge
Model
LD-20X12-TUFR
#132437
Brand
Dodge
Model
P2B-DLB-102
#2257184
Brand
SealMaster
Model
700574
#17338
Brand
AMI Bearings
Model
UCLP206-18
| Brand | PEER Bearing |
| Model | FHF3X205-14G |
| Brand | Dichtomatik |
| Model | 75022852 |
| Brand | Jason Industrial |
| Model | 1420-5M-15 |
| Brand | Jason Industrial |
| Model | D475-5M-25 |
SKU: 117408
P90 coupler
These where a perfect match saved me time and money by getting them fro you guys
Read moreItem must be unused and undamaged, in it's orginal package. For Dodge there is typically a 10% + $30 US re-stocking fee, although it may vary from case to case. Re-packing fees may apply. Re-stocking fee applies bor both returns for credit and return for exchange.
Warranty is redeemed directly with manufacturer. If your item was damaged during usage, please let us know and we will help you get in touch with your nearest service center, they will guide you about the steps to follow to redeem the manufacturer's warranty.
For further information on our returns/warranty policy, please visit:
https://www.mrosupply.com/page/returnwarranty-policy/