We never sell your data to third parties
Isostatic M300100TU steel-backed PTFE sleeve bearing, 300mm I.D. x 305mm O.D. x 100mm length. Self-lubricating and maintenance-free for dry running applications. Suitable for high-temperature environments and linear or oscillating motion.
MODEL M300100TU
Contact supplier for technical support on: 7732863444
$138.50 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable: See conditions
Bearing Material
Steel-Backed PTFE Lined
Bore
300 mm
Maximum Pressure
36250 psi
Maximum PV Rating
102000 psi/sq-ft/min
Maximum Velocity
1900 sfpm
O.D.
305 mm
Temperature Rating
-328 to 536 deg F
Type
Round Bore
Width
100 mm
Isostatic TU Sleeve Bearings
- Standard stock products
- Self-lubricating dry sliding bearing
- A steel-backed composite material comprised of:
- Low carbon steel backing allows for extremely high load capacity - thickness. 50 – 2. 7 mm
- Sintered bronze offers optimal heat dispersion – thickness. 20 -. 35 mm
- PTFE – lead sliding surface creates a low friction coefficient and allows for a wide temperature range – thickness. 02 mm
- Can be used where many liquid lubricants fail; also performs well with lubrication
- Ideal for heavy loads at moderate speeds or light loads at high speeds – max Pv 102, 000, P-Load 36, 250, V-SFM-1, 900
- Effective in temperature range of -328°F to +536°F
- Standard tolerances vary by size. See items for specific tolerances
- A lead free version is available on a made-to-order basis
- REACH, DFARS compliant
Specifications
| Detailed Description | 300 MM I. D. x 305 MM O. D. x 100 MM Length, TU, Steel Back, PTFE & Pb Lined Composite, Sleeve Bearing, Metric |
|---|---|
| Catalog Number | M300100TU |
| Interchange # | 300100DU MB300100DU PAP 300100 P10 |
| Unit of Measure | Each |
| Material | Steel-Backed PTFE Lined |
| Material Standard | Steel-Backed PTFE Lined |
| UPC Code | 00846802069902 |
| Nominal Inner Diameter | 300 mm |
| Nominal Outer Diameter | 305 mm |
| Nominal Length | 100 mm |
| Recommended Shaft Size | 299. 919 to 300. 000 mm |
| Recommended Housing Bore | 305. 000 to 305. 052 mm |
| Overall Length Tolerance | ±. 25 mm |
| Load - P Max Value | 36, 250 lb/in² |
| Speed - V Max Value | 1, 900 ft²/min |
| Load at Speed - PV Max Value (P. S. I. / S. F. M. ) | 102, 000 |
SKU: 1382448
Bushings
Fastest delivery yet 2 days. check out is simple. Have used before and will again .
Read moreSKU: 1380654
Answer your review request
Have purchased the Isostatic sintered bronze items instead of Symmco and they work just as well, but cost less $.
Read moreSKU: 1382499
Sleeve for my gates
I got my sleeves, and they are working as intended for my gates.
Read moreHow do I choose the right type of bearing for my application?
Start with the load and how it’s applied. You need to know if you’re dealing with radial loads, axial loads, or a mix of both. Then look at speed, operating environment, and space constraints. For example, ball bearings are great for high speed and lighter loads, while roller bearings handle heavier loads but usually at lower speeds. If there’s contamination, moisture, or heat involved, you may need sealed bearings or specific materials. In most cases, the right choice comes down to matching load type, speed, and environment to the bearing design.
SKU: 1382448
Bushings
Fastest delivery yet 2 days. check out is simple. Have used before and will again .
Read moreSKU: 1380654
Answer your review request
Have purchased the Isostatic sintered bronze items instead of Symmco and they work just as well, but cost less $.
Read moreSKU: 1382499
Sleeve for my gates
I got my sleeves, and they are working as intended for my gates.
Read more