Add products to your shopping cart



Image for Illustration purposes only. Actual product may vary

BUNTING EF162216 FL10408 1 X 1-3/8 X 1 SAE841 Standard Flange Bearing

View additional description
  • Typically ships in: 1 day
  • Weight: 0.2 lb
  • Unit of measure: each
  • Contact supplier for technical support on: 888-286-8464
  • MOQ: 11

$5.77 Each


Select Quantity

Returnable: Yes

Payment methods:

Nov. 4, 2018

This grading system was introduced by the Annular Bearing Engineering Committee (ABEC) of the American Bearing Manufacturers Association (ABMA) to help users pick bearings that fit their use even when they are unaware about primary factors about the material, performance and manufacturer.

Read More


Additional Description

Bunting Bearings Llc Bunting&Reg; EF162216

UPC: 717905073236 | UNSPSC: 31171501 | GTIN:
Bearings > Plain & Sleeve Bearings > Plain Sleeve & Flanged Bearings

Bunting® Flanged Bearing, 1 in Bore, 1-3/8 in OD, 1 in Width, 1-5/8 in Diameter Flange, 3/16 in Flange Width, 10 to 220 deg F, 2000 psi Maximum, 1200 sfpm Maximum Velocity, 50000 Maximum PV, Sintered Bronze Bearing, Powder Coated


  • Smooth housing bore chamfers reduce bearing installation time and eliminate press fit loss due to the shearing of metal from the bearing OD
  • Tooling for production of stamped housings should be designed to provide a radius edge which will act as a lead and furnish clearance for flange fillet
  • Sleeve cylindrical journal bearings are commonly installed by press fitting the bearing into a housing with an insertion arbor
  • For housings rigid enough to withstand the press fit without appreciable distortion and for bearings with thickness approximately one eighth of the bearing OD
  • Proper running clearance for bearings depends to a great extent on the particular application
  • Only minimum recommended clearances for oil-impregnated bearings used with ground steel shafting
  • Oil-impregnated units should be stored in suitable containers using plastic bags, wax paper, metal, glass
  • Properly stored and protected against dust, oil-impregnated bearings retain their oil supply


  • Maximum PV Rating: 50000
  • Maximum Velocity: 1200 sfpm
  • Bearing Material: Sintered Bronze
  • Flange Width: 3/16 in
  • Flange Diameter: 1-5/8 in
  • Temperature Rating: 10 to 220 deg F
  • Maximum Pressure: 2000 psi
  • Bore Diameter: 1 in
  • Outside Diameter: 1-3/8 in
  • Finish: Powder Coated
  • Width: 1 in


ANSI/ASQC Z1.4 | ASTM B438 | CBSA/NFFS/PTDA Association | CT-1000-K26 Metal Powder Industries Federation | MIL-B-5687D Military Specification | OSHA Standard 29 CFR 1910.1200 | SAE 841


90 Days


I.D. 1 in
O.D. 1 3/8 in

SKU: 578747

Shaft sleeves/bunting

Really Good Price and Good Quality from what I can see. We use as shaft sleeves on electric pumps. Will order again!

Read more