Categories

Add products to your shopping cart

Subtotal

View cart
  • BRAND: MRC Bearing
  • SKU: 1132402
  • CONDITION: NEW
  • MODEL: 222SFF

MRC 222SFF SINGLE ROW BALL BRGS

$273.28 Each

NEW

  • Free shipping on orders over $20
  • Shipping from: See locations
  • Typically ships in: 1 day

Select Quantity

Additional Description

Item Details
Manufacturer: MRC Bearing Service
Weight: 10.152 lbs.
Product Name: 200-S Light Series Ball Bearing
Description: 110 mm ID x 200 mm OD x 38 mm Wide; Double Shielded; No Snap Ring; Single Row Radial Steel Bearing
Specifications
Inch/MetricMetric BoreBore TypeRound Bore
I.D.110 mmO.D. [Min]
O.D. [Max]O.D.200 mm
Width [Min]Width [Max]
Width38 mmEnclosureDouble Shielded
Rows of BallsSingleMaterialSteel
O.D. TypeStraightBearing TypeRadial
PrecisionStandardRadial Internal Clearance SpecificationNormal Clearance
Ambient Temperature Range [Min]Ambient Temperature Range [Max]
Ball MaterialSteelCage TypeMetal
CapacityStandard CapacityContact Angle
Guide TypeLubrication
Outer Ring Width38 mmPrecision LevelStandard (ABEC 1)
Preload LevelNoneSeal MaterialMetal
Seal TypeNon-Contact SealsSeal Width
Dynamic Load Rating32100 lbfStatic Load Rating [Max]26500 lbf
Ball Dia.Bearing Design
Bore BCage MaterialSteel
Collar No.Collar O.D.
Collar WidthCorner Radius [Min]
Eccentric Collar OffsetFillet Radius2 mm
Flange O.D. [Max]Flange O.D.
Flange Width [Max]Flange Width
Flush GroundHousing Shoulder Diameter [Min]
Housing Shoulder Diameter [Max]Housing Shoulder Diameter
Industry Standard Part #Inner Ring O.D.
Inner Ring OffsetInner Ring Width38 mm
Internal DesignLimiting Speed
Limiting Speed - Grease3000 rpmLimiting Speed - Oil3600 rpm
Limiting Speed - Sealed2000 rpmLocking DeviceNo Locking Device
Lube Hole CenterLubricantPolyurea Base
Misalignment RangeNo. in SetSingle Bearing
No. of BallsO.D. (B)
Outer RingOuter Ring Inner Diameter
Outer Ring SizePeak Running Torque (mg-mm)
Peak Starting Torque (mg-mm)Pre Lubricant
Preload AmountRadial Internal ClearanceNormal
Radial Load Rating [Max]Radial Rigidity (lbf/µm)
Reference SpeedSeal O.D.
Seal Protection WidthSeating Washer
SeriesSet Screw Offset
Set Screw SizeShaft Shoulder Diameter [Min]
Shaft ToleranceSnap RingNo Snap Ring
Snap Ring O.D.Snap Ring Offset
Snap Ring ThicknessSpecial Features
StampingStatic Thrust Load Rating [Max]
Temperature Range [Min]-22 °FTemperature Range [Max]250 °F
Use With  
Product Information
Applications
  • Used in applications with moderate to heavy radial loads, tow-directional thrust loads, or a combination of both
  • Features
  • Single-row radial deep groove bearing with no filling notches
  • Can carry significant radial loads
  • Can carry substantial thrust loads in either direction, even at very high speeds
  • Supplied with a pressed steel cage
  • Single-row radial conrad-type bearings made with bores from 10 mm to 120 mm
  • Specifications:

    Cage Metal
    I.D. 4.331
    Locking None
    O.D. 7.874
    Bearing Type Radial
    Enclosure Double Shielded

    Return policy

    Item must be unused.

    Item must be in it's original package.

    This item is shipping from locations below:

    Product's availability