Categories

Add products to your shopping cart

#1132799

408M

Image for Illustration purposes only. Actual product may vary

MRC 408M MAX TYPE BALL BRGS

View additional description
  • Typically ships in: 1 day
  • Weight: 2.9 lb

$192.20 Each

MRC Bearing items are expected to have a price increase after 03/16/2020

Select Quantity

Unit of measure: each

Returnable: See conditions

Payment methods:

Jan. 6, 2019

To diagnose false brinelling, check for wear marks in the axial direction on the rolling element pitch as opposed to marks that result from incorrect mounting.

Read More

 

Additional Description

Item Details
Manufacturer: MRC Bearing Service
Weight: 2.9 lbs.
Product Name: 400-M Heavy Series Ball Bearing
Description: 40 mm ID x 110 mm OD x 27 mm Wide; Open; No Snap Ring; Single Row Radial Steel Bearing
Specifications
Inch/MetricMetric BoreBore TypeRound Bore
I.D.40 mmO.D. [Min]
O.D. [Max]O.D.110 mm
Width [Min]Width [Max]
Width27 mmEnclosureOpen
Rows of BallsSingleMaterialSteel
O.D. TypeStraightBearing TypeRadial
PrecisionStandardRadial Internal Clearance SpecificationNormal Clearance
Ambient Temperature Range [Min]Ambient Temperature Range [Max]
Ball MaterialSteelCage TypeMetal
CapacityMaximum CapacityContact Angle
Guide TypeLubrication
Outer Ring Width27 mmPrecision LevelStandard (ABEC 1)
Preload LevelNoneSeal MaterialNone
Seal TypeUnsealedSeal Width
Dynamic Load Rating15300 lbfStatic Load Rating [Max]11700 lbf
Ball Dia.Bearing Design
Bore BCage MaterialSteel
Collar No.Collar O.D.
Collar WidthCorner Radius [Min]
Eccentric Collar OffsetFillet Radius2 mm
Flange O.D. [Max]Flange O.D.
Flange Width [Max]Flange Width
Flush GroundHousing Shoulder Diameter [Min]
Housing Shoulder Diameter [Max]Housing Shoulder Diameter
Industry Standard Part #Inner Ring O.D.
Inner Ring OffsetInner Ring Width27 mm
Internal DesignLimiting Speed
Limiting Speed - Grease5300 rpmLimiting Speed - Oil6500 rpm
Limiting Speed - SealedLocking DeviceNo Locking Device
Lube Hole CenterLubricantOil Preservative
Misalignment RangeNo. in SetSingle Bearing
No. of BallsO.D. (B)
Outer RingOuter Ring Inner Diameter
Outer Ring SizePeak Running Torque (mg-mm)
Peak Starting Torque (mg-mm)Pre Lubricant
Preload AmountRadial Internal ClearanceNormal
Radial Load Rating [Max]Radial Rigidity (lbf/µm)
Reference SpeedSeal O.D.
Seal Protection WidthSeating Washer
SeriesSet Screw Offset
Set Screw SizeShaft Shoulder Diameter [Min]
Shaft ToleranceSnap RingNo Snap Ring
Snap Ring O.D.Snap Ring Offset
Snap Ring ThicknessSpecial Features
StampingStatic Thrust Load Rating [Max]
Temperature Range [Min]Temperature Range [Max]450 °F
Use With  
Product Information
Caution
Not to be used where only thrust loads are present
Applications
  • Used with exremely heavy radial loads, or a combination of radial load is predominant
  • Features
  • Maximum radial load-carrying capacity
  • Ability to carry heavy combined radial and thrust loads
  • Designated as the notched type because it has a filling notch on one side of the inner and outer rings
  • Normally furnished with ABMA CO radial clearance
  • Type and material available is a two-piece, pressed steel, ball riding, stayrod cage
  • Single-row maximum capacity fillig-notch bearings with bores ranging from 17 mm to 100 mm
  • Documents

    Specifications:

    Locking None
    I.D. 1.575
    Cage Metal
    O.D. 4.331
    Bearing Type Radial
    Enclosure Open

    Return policy

    Item must be unused.

    Item must be in it's original package.

    Product's availability

    State of California Proposition 65 Product Warning