We never sell your data to third parties
Timken 23044KEJW33C2 is a tapered bore spherical roller bearing with a 220 mm bore and C2 radial internal clearance. It features a pressed steel cage (EJ) and a W33 lubrication groove. This self-aligning bearing has a dynamic load rating of 300,000 lbf and is superseded by part number 23044KCJW33C2. It is designed for applications requiring precise alignment and moderate operating speeds.
MODEL 23044KEJW33C2
$3,431.26 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable: Yes
12.3000 in Outer ring width
90 mm
3.5433 in Lubrication type
Standard Grease O.D. (in):340 mm 13.3858 Outer ring to clear radius:0.100 in Outer ring backing diameter:313.000 mm
3.5433 in Reference thermal speed rating (grease)
1400 RPM Reference thermal speed rating (oil):1700 Static radial rating:1340000 N
300000 lbf Superseded part
23044KCJW33C2
443000 lbf Geometry factor
0.1014 ISO factor:4.13 Inner ring to clear radius:0.100 in Inner ring backing diameter:247.000 mm
9.700 in Inner ring width
90 mm
Bore taper
1/12
Cage material
Steel
Cage type
EJ
Design unit
METRIC
Dynamic radial rating (two-rows)
300000 lbf
Geometry factor
0.1014
I.D.
8.6614 in
Inner ring "to clear" radius
0.100 in
Inner ring backing diameter
9.700 in
Inner ring width
3.5433 in
ISO factor
4.13
O.D.
13.3858 in
Outer ring "to clear" radius
0.100 in
Outer ring backing diameter
12.300 in
Outer ring width
3.5433 in
Reference thermal speed rating (grease)
1400
Reference thermal speed rating (oil)
1700
Static radial rating
443000 lbf
Superseded part
23044KCJW33C2
Spherical bearings are designed to manage high radial loads even when misalignment, poor lubrication, contamination, extreme speeds or critical application stresses are present.
SKU: 5066946
Best company to buy from
I always buy from MRO is a very reliable company to work with
Read moreHow do I choose the right type of bearing for my application?
Start with the load and how it’s applied. You need to know if you’re dealing with radial loads, axial loads, or a mix of both. Then look at speed, operating environment, and space constraints. For example, ball bearings are great for high speed and lighter loads, while roller bearings handle heavier loads but usually at lower speeds. If there’s contamination, moisture, or heat involved, you may need sealed bearings or specific materials. In most cases, the right choice comes down to matching load type, speed, and environment to the bearing design.
| Brand | Linn Gear |
| Model | 50FB15HX1.250 |
SKU: 5066946
Best company to buy from
I always buy from MRO is a very reliable company to work with
Read more