WEG - Page 7 - MROSupply.com

#1307993

WEG CAB-COMM-10 serial communication cable, 33 ft (10m) length, RS-232 DB9 male-to-female. Designed for use with the KRS-232-SSW07 communication kit to connect SSW07 series soft starters to a PC or programming device for configuration, monitoring, and parameter programming via SuperDrive G2 software.

Brand	WEG
Model	CAB-COMM-10

$118.90 Each

Free Shipping orders over $100

#1308005

WEG ECA SSW06 480A is an external current transformer (CT) module designed for use with SSW06 series soft starters. This 480A CT provides accurate motor current sensing for advanced motor protection and control functions, enabling precise monitoring and overload protection in three-phase applications. It is compatible with WEG's SSW06 soft starter platform for industrial motor starting and protection systems operating at 220-575VAC.

Brand	WEG
Model	ECA SSW06 480A

$337.40 Each

Free Shipping orders over $100

#1308019

WEG KIT IP20 SSW06 M3 is an IP20 enclosure upgrade kit designed for SSW06 series soft starters in M3 frame sizes, covering current ratings from 170 to 205 amps. This kit provides a finger-safe, open-type protective enclosure (IP20) to shield internal components from accidental contact with live parts and objects larger than 12.5mm.

Brand	WEG
Model	KIT IP20 SSW06 M3

$165.20 Each

Free Shipping orders over $100

#1308123

WEG GPH2050PC4001 GPH2 combination soft starter panel, 40 HP at 460V three-phase. Pre-assembled unit integrates an SSW07 series soft starter with built-in AC3 bypass contactor, disconnect switch, and branch circuit protection in a NEMA 4 enclosure. Features closed-loop torque control, pump control mode, and includes start/stop pushbuttons, run/fault lights, and remote keypad.

Brand	WEG
Model	GPH2050PC4001

$3,957.69 Each

Free Shipping orders over $100

#1308499

WEG KESWFP is a factory-assembled kit providing an OFF/ON two-position selector switch for use with WEG ESW series magnetic motor starters. This kit includes all necessary components for adding local control functionality to across-the-line motor starters, enabling safe manual start and stop operations. It is designed for industrial control panels requiring a maintained contact selector for motor control circuits.

Brand	WEG
Model	KESWFP

$50.97 Each

Free shipping

#1310032

WEG CWM50-00-30V18 is a CWM50 series IEC contactor designed for motor control applications. This three-pole contactor is rated for 40 HP at 460V and features a 120V 60Hz AC coil. It is part of WEG's comprehensive line of AC general purpose contactors, built to meet international standards including UL, CSA, and IEC 60947-4-1 for reliable switching and motor starting.

Brand	WEG
Model	CWM50-00-30V18

$113.63 Each

Free Shipping orders over $100

#1310047

WEG CWM65-00-30V18 is a 65A IEC contactor from the CWM series, designed for motor starting and power switching applications. This three-pole contactor features a 120VAC 60Hz coil and is rated for 50 HP at 460V. It meets international standards including UL/CSA and IEC 60947-4-1 for reliable performance in industrial control panels and motor starter assemblies.

Brand	WEG
Model	CWM65-00-30V18

$128.78 Each

Free Shipping orders over $100

#1310315

WEG 00718ST3QIE213T-W22 is a 7.5 HP, 1800 RPM, three-phase severe duty motor built to IEEE 841 standards. This NEMA Premium efficiency (IE3) motor features a 213T cast iron frame, 460V rating, and TEFC (IP55) enclosure. It is designed for harsh industrial environments with Class I Div 2 certification, inverter duty capability (20:1 constant torque), and Class F insulation for extended service life.

Brand	WEG
Model	00718ST3QIE213T-W22

$1,476.29 Each

Free Shipping orders over $100

#1310679

WEG CSW-SS1PBS is a preassembled pushbutton station featuring a combination start/stop operator. Part of the CSW series of control devices, this station is factory-assembled for quick installation and reliable operation in industrial control panels. It provides a compact and durable interface for motor control and general machine operation.

Brand	WEG
Model	CSW-SS1PBS

$100.48 Each

Free Shipping orders over $100

#1310689

WEG SRW01-IHM HMI keypad for smart relays, an operator interface panel with a clear display and tactile keys for monitoring and controlling automated processes. Provides parameter setting and system interaction for WEG programmable logic control devices.

Brand	WEG
Model	SRW01-IHM

$138.65 Each

Free Shipping orders over $100

#1310918

WEG PF3-BTW is a 100-pack of end bracket terminals designed for secure and organized wiring connections within WEG motor conduit boxes. These terminals facilitate proper termination of motor leads, supporting reliable electrical installations for industrial motors. The kit ensures compatibility with standard WEG motor terminal configurations, aiding in maintenance and assembly.

Brand	WEG
Model	PF3-BTW

$52.38 Each

Free shipping

#1312164

WEG 00236ET3E145T-W22 is a 2 HP, 3600 RPM, three-phase AC motor featuring a NEMA Premium (IE3) efficiency TEFC enclosure. This W22 severe duty motor is rated for 208-230/460V, 60 Hz operation with a 145T NEMA frame. Constructed with a cast iron frame and IP55 protection, it includes IEEE 841 vibration levels, Class I Div 2 certification, and inverter duty capability for a 20:1 constant torque speed range. The motor features Class F insulation, a 1.

Brand	WEG
Model	00236ET3E145T-W22

$547.05 Each

Free Shipping orders over $100

#1312206

WEG 00518ET3ER184TC-W22 is a 5 HP, 1800 RPM, NEMA Premium efficiency (IE3) three-phase motor with a 184TC frame and C-face mount. This W22 series TEFC motor features a cast iron construction, IP55 enclosure, and is rated for 208-230/460V, 60Hz operation. It includes Class F insulation, a 1.15 service factor, and is suitable for inverter duty applications with a 20:1 constant torque speed range. The motor is designed for severe duty and complies with IEEE 841 standards.

Brand	WEG
Model	00518ET3ER184TC-W22

$771.99 Each

Free Shipping orders over $100

#1312227

WEG 00718ET3E213TF3-W22 is a 7.5 HP, 1800 RPM, three-phase TEFC motor with a 213T NEMA frame and 208-230/460V dual voltage rating. This W22 platform motor features NEMA Premium (IE3) efficiency, cast iron construction, and a 1.15 service factor. It is designed for severe duty applications with IP55 enclosure protection, IEEE 841 vibration levels, and Class I Div 2 certification.

Brand	WEG
Model	00718ET3E213TF3-W22

$1,038.56 Each

Free Shipping orders over $100

#1312341

WEG 03012ET3E326T-W22 is a 30 HP, 1200 RPM, NEMA Premium (IE3) efficiency three-phase motor with a 326T frame and Totally Enclosed Fan Cooled (TEFC) IP55 enclosure. This W22 severe duty motor features a 208-230/460V dual voltage rating, 60 Hz operation, cast iron construction, and a 1.15 service factor. It is IEEE 841 compliant, Class I Div 2 certified, and suitable for inverter duty applications with a 20:1 constant torque speed range.

Brand	WEG
Model	03012ET3E326T-W22

$5,050.36 Each

Free Shipping orders over $100

#1312354

WEG 03036ET3E286TSC-W22 is a 30 HP, 3600 RPM, three-phase NEMA Premium efficiency motor with a 286TSC frame and Totally Enclosed Fan Cooled (TEFC) IP55 enclosure. It operates on 208-230/460V, 60Hz power and features the W22 cast iron construction with Class F insulation, a 1.15 service factor, and inverter duty capability for variable frequency drive applications. This motor is designed for severe duty use with IEEE 841 vibration levels and Class I Division 2 certification.

Brand	WEG
Model	03036ET3E286TSC-W22

$3,281.74 Each

Free Shipping orders over $100

#1312355

WEG 03036ET3E286TSF2-W22 is a 30 HP, 3600 RPM, three-phase TEFC motor with a 286TS frame and 208-230/460V dual voltage rating. This NEMA Premium (IE3) efficiency motor features a cast iron W22 construction, IP55 enclosure, and a 1.15 service factor. It is designed for severe duty applications, offering IEEE 841 vibration levels, Class I Div 2 certification, and inverter duty capability with a 20:1 constant torque speed range.

Brand	WEG
Model	03036ET3E286TSF2-W22

$3,193.84 Each

Free Shipping orders over $100

#1312414

WEG 06018ET3E364TC-W22 is a 60 HP, 1800 RPM, NEMA Premium efficiency (IE3) three-phase motor with a 364TC C-face mount frame. This W22 series TEFC motor operates on 208-230/460V 60Hz power, featuring cast iron construction, IP55 enclosure, and a 1.15 service factor. It is designed for severe duty applications with IEEE 841 vibration levels, Class I Div 2 certification, and inverter duty capability for constant torque operation with a 20:1 speed range.

Brand	WEG
Model	06018ET3E364TC-W22

$6,969.59 Each

Free Shipping orders over $100

#1312429

WEG 06036ET3E364TS-W22 is a 60 HP, 3600 RPM, NEMA Premium (IE3) efficiency, three-phase motor with a 364TS frame and Totally Enclosed Fan Cooled (TEFC) IP55 enclosure. This W22 severe duty motor operates on 208-230/460V 60Hz power, featuring cast iron construction, Class F insulation, a 1.15 service factor, and IEEE 841 vibration levels. It is rated for inverter duty (20:1 constant torque) and is Class I Div 2 certified for hazardous locations.

Brand	WEG
Model	06036ET3E364TS-W22

$6,721.28 Each

Free Shipping orders over $100

#1312559

WEG 20018ET3GRB447T-W22 is a 200HP, 1800RPM, NEMA Premium IE3 efficiency three-phase motor with a 447T cast iron frame and Totally Enclosed Fan Cooled (TEFC) IP55 enclosure. This W22 product line motor features 460V PWS voltage, roller bearings for belt-driven applications, a 1.15 service factor, and Class F insulation. It is designed for severe duty applications with inverter duty capability (20:1 constant torque) and meets IEEE 841 vibration standards.

Brand	WEG
Model	20018ET3GRB447T-W22

$18,777.22 Each

Free Shipping orders over $100

#1312668

WEG 00218ET3ECT145TF1-W2 is a 2HP, 1800RPM, three-phase TEFC motor designed for cooling tower applications. It features a 145T NEMA frame, 208-230/460V dual voltage rating, and 60Hz operation. This motor is built with a cast iron construction for durability and is part of the W2 product line, suitable for demanding industrial environments requiring reliable fan and blower drive.

Brand	WEG
Model	00218ET3ECT145TF1-W2

$696.08 Each

Free Shipping orders over $100

#1313099

WEG 03018ET3PCT286T-W22 is a 30 HP, 1800 RPM, NEMA Premium efficiency (IE3) three-phase motor with a 286T frame and Totally Enclosed Fan Cooled (TEFC) IP55 enclosure. Designed for cooling tower applications, it operates on 200V, 60Hz power with a 1.15 service factor. This W22 severe duty motor features cast iron construction, Class F insulation, and is suitable for inverter duty with a 20:1 constant torque speed range.

Brand	WEG
Model	03018ET3PCT286T-W22

$3,352.60 Each

Free Shipping orders over $100

#1313680

WEG 00718ET3E213JM-W22 is a 7.5 HP, 1800 RPM, NEMA Premium (IE3) efficiency, three-phase motor with a 213JM close-coupled pump frame. This W22 product line motor features a totally enclosed fan-cooled (TEFC) IP55 enclosure, cast iron construction, and a 208-230/460V dual voltage rating. It is designed for direct face mounting to pumps with a stainless steel shaft, offering Class F insulation and a 1.15 service factor for demanding industrial applications.

Brand	WEG
Model	00718ET3E213JM-W22

$1,370.90 Each

Free Shipping orders over $100

#1314320

WEG 01018XT3E215TC is a NEMA Premium (IE3) efficiency, explosion-proof three-phase motor rated for 10 HP at 1800 RPM. This TEFC motor features a 215TC C-face mount frame, operates on 208-230/460V 60Hz power, and is designed for hazardous locations. It is constructed with a cast iron frame, offers Class I Div 1 Groups C, D and Class II Div 1 Groups E, F, G certifications, and includes Class F insulation with a 1.15 service factor for severe duty applications.

Brand	WEG
Model	01018XT3E215TC

$1,955.23 Each

Free Shipping orders over $100

#1314361

WEG 02036XT3E256T NEMA Premium Explosion Proof three-phase motor, 20 HP, 3530 RPM, 256T cast iron frame, 208-230/460V, 60 Hz. TEFC IP55 enclosure with Class I Div 1 Groups C, D and Class II Div 1 Groups E, F, G certifications. 1.15 service factor, Class F insulation, inverter duty rated.

Brand	WEG
Model	02036XT3E256T

$2,765.13 Each

Free Shipping orders over $100

#1314646

WEG 00518ET3Y132S-W22 is a 5 horsepower, 1800 RPM, NEMA Premium efficiency (IE3) three-phase motor with a 132S frame and Totally Enclosed Fan Cooled (TEFC) IP55 enclosure. This W22 product line motor features cast iron construction, Class F insulation, a 1.15 service factor, and is rated for 460/380-415/660-690V, 60/50 Hz operation.

Brand	WEG
Model	00518ET3Y132S-W22

$917.43 Each

Free Shipping orders over $100

#1314658

WEG 01136ET3Y160M-W22 is a 15 HP, 3600 RPM, NEMA Premium (IE3) efficiency three-phase motor with a 160M IEC metric frame and Totally Enclosed Fan Cooled (TEFC) IP55 enclosure. This W22 product line motor features cast iron construction, Class F insulation, a 1.15 service factor, and is rated for 460/380-415/660-690V 50/60 Hz operation.

Brand	WEG
Model	01136ET3Y160M-W22

$1,885.27 Each

Free Shipping orders over $100

#1314671

WEG 01836ET3Y160L-W22 is a 25 HP, 3600 RPM, NEMA Premium efficiency (IE3) three-phase motor in a 160L IEC metric frame. This Totally Enclosed Fan Cooled (TEFC) motor features a cast iron W22 construction with IP55 protection, Class F insulation, and a 1.15 service factor. It is rated for 460/380-415/660-690V, 60/50 Hz operation, making it suitable for global applications requiring high efficiency and robust performance in industrial environments.

Brand	WEG
Model	01836ET3Y160L-W22

$2,623.42 Each

Free Shipping orders over $100

#1314704

WEG 07518ET3Y280S/M-W22 is a 75 horsepower, 1800 RPM, three-phase AC motor featuring a TEFC (Totally Enclosed Fan Cooled) enclosure and NEMA Premium (IE3) efficiency. This severe duty W22 platform motor is constructed with a cast iron frame (280S/M) and operates on 460V power. It includes IEEE 841 severe duty construction, Class I Division 2 certification, IP55 ingress protection, and inverter duty capability with a 20:1 constant torque speed range. The motor features Class F insulation, a 1.

Brand	WEG
Model	07518ET3Y280S/M-W22

$10,994.17 Each

Free Shipping orders over $100

#1315126

WEG PCQ110 is a 1 horsepower, 3600 RPM, single-phase open drip proof (ODP) motor designed for pool and spa applications. It operates on 115/230V, 60Hz power and features a K48Y frame with a 0.5-inch shaft diameter. This general-purpose motor is built with a rolled steel frame and ball bearings, suitable for ventilation and circulation duties where moisture resistance is required.

Brand	WEG
Model	PCQ110

$272.18 Each

Free Shipping orders over $100

#1315195

WEG 00518NT3FVD184TC-W22 is a NEMA Premium (IE3) efficiency, Totally Enclosed Non-Ventilated (TENV) three-phase motor rated for 5 HP at 1800 RPM. This Vector Duty (VD) motor features a 184TC frame with C-face mounting, operates on 230/460V 60Hz power, and is part of the W22 cast iron platform. It is designed for inverter drive applications requiring constant torque operation and includes Class F insulation with a 1.15 service factor for demanding industrial use.

Brand	WEG
Model	00518NT3FVD184TC-W22

$1,270.91 Each

Free Shipping orders over $100

#2519223

WEG .5018ES3E56C-S is a 0.5 horsepower, 1800 RPM, three-phase AC motor with a standard efficiency rating. This totally enclosed fan-cooled (TEFC) motor features a 56C NEMA frame with a C-face mount, a 208-230/460V dual voltage rating, and 60 Hz operation. Constructed with a rolled steel frame, it includes ball bearings, Class F insulation, and a 1.15 service factor for general-purpose industrial applications.

Brand	WEG
Model	.5018ES3E56C-S

$287.87 Each

Free Shipping orders over $100

#2519267

WEG .7518ES3E56CFL-S is a 0.75 horsepower, 1800 RPM, three-phase AC motor with a standard efficiency rating. It features a Totally Enclosed Fan Cooled (TEFC) enclosure, a 56CFL C-face footless frame, and operates on 208-230/460V 60Hz power. This rolled steel frame motor is designed for general-purpose industrial applications requiring a compact, C-face mount configuration.

Brand	WEG
Model	.7518ES3E56CFL-S

$307.31 Each

Free Shipping orders over $100

#2519683

WEG 00236OS3EJPR56J-S is a 2 horsepower, 3600 RPM, three-phase open drip proof (ODP) motor designed for jet pump applications. This motor features a 56J NEMA frame with a close-coupled pump face mount (JP), a 230/460V dual voltage rating for 60Hz operation, and a rolled steel construction. It is engineered for demanding pumping duties, offering reliable performance in agricultural irrigation, water transfer, and residential water systems.

Brand	WEG
Model	00236OS3EJPR56J-S

$297.13 Each

Free Shipping orders over $100

#2520137

WEG 00736OT3E184JM-S is a 7.5 HP, 3600 RPM, three-phase NEMA Premium efficiency motor with an Open Drip Proof (ODP) enclosure. It features a 184JM close-coupled pump frame for direct mounting to pumps, operates on 208-230/460V 60Hz power, and is constructed with a rolled steel frame. This motor is designed for general-purpose pump applications requiring a 1.15 service factor and Class F insulation system.

Brand	WEG
Model	00736OT3E184JM-S

$1,005.24 Each

Free Shipping orders over $100

#2520934

WEG BCWTC750V53B4-N is a three-phase power factor correction capacitor rated for 7.5kVAr at 480V. This industrial capacitor is designed for fixed compensation in electrical distribution systems to improve power factor, reduce energy losses, and enhance system capacity. It features a 53B4 frame configuration and is intended for use in capacitor banks and power factor correction panels to meet utility requirements and optimize electrical efficiency.

Brand	WEG
Model	BCWTC750V53B4-N

$483.66 Each

Free Shipping orders over $100

#2521326

WEG CFW500-IOS I/O expansion module for CFW500 series modular general purpose variable frequency drives. This plug-in module adds digital and analog inputs and outputs to extend control and monitoring capabilities. Compatible with all CFW500 frame sizes, it installs into the drive's dedicated option slot for easy integration.

Brand	WEG
Model	CFW500-IOS

$71.05 Each

Free shipping

#2521447

WEG CWC016-00-40L03 is a miniature IEC contactor rated for 16A, featuring a 24VDC coil and one normally closed (1NC) auxiliary contact. This compact, general-purpose contactor is designed for motor control and switching applications in industrial automation panels. It meets international standards including IEC 60947-4-1 and is suitable for use with thermal overload relays for complete motor starter assemblies.

Brand	WEG
Model	CWC016-00-40L03

$30.70 Each

Free shipping

#2521654

WEG DRAIN PLUG-10652832 is a condensation drain plug designed for use with WEG electric motors. This component allows for the safe drainage of moisture and condensation that can accumulate within the motor enclosure, helping to protect internal components from corrosion and electrical faults. It is a genuine WEG replacement part compatible with various motor frames and enclosures, including TEFC and severe duty models where moisture management is critical for reliable operation.

Brand	WEG
Model	DRAIN PLUG-10652832

$5.52 Each

Free shipping

#2523424

WEG FAN-E80 standard efficiency plastic cooling fan for IEC 80 frame TEFC motors. Constructed from polypropylene homopolymer for corrosion resistance and durability. Suitable for 8/6/4/2 pole configurations. Provides essential ventilation to maintain proper thermal management and reliable motor operation. Engineered to meet original equipment specifications for fit and airflow performance.

Brand	WEG
Model	FAN-E80

$11.56 Each

Free shipping

#2523453

WEG FAN-W444/54P plastic cooling fan for 444/5T frame integral horsepower motors, compatible with 8/6/4 pole configurations. Constructed from polypropylene homopolymer for durability and thermal resistance. Designed for WEG W22 and similar severe-duty motor platforms, this replacement fan ensures proper ventilation and thermal management to maintain optimal operating temperatures and extend motor life in demanding industrial applications.

Brand	WEG
Model	10016936

$93.86 Each

Free shipping

#2523455

WEG FAN-W447/5054P is a plastic replacement cooling fan designed for W22 platform motors with NEMA 447T through 505T frame sizes and IEC 315-4 frame equivalents. This accessory part ensures proper ventilation for Totally Enclosed Fan Cooled (TEFC) motors, maintaining optimal operating temperatures for severe duty and inverter duty applications. It is a direct-fit component for motor maintenance and repair.

Brand	WEG
Model	FAN-W447/5054P

$105.82 Each

Free Shipping orders over $100

#2523698

WEG K-PT100 PT100 temperature transducer board designed as an accessory for SSW06 series soft starters. This board provides accurate motor temperature monitoring by connecting to motor-mounted PT100 sensors, enabling enhanced thermal protection. It integrates with the soft starter's control system to help prevent motor damage from overheating in demanding industrial applications.

Brand	WEG
Model	K-PT100

$305.29 Each

Free Shipping orders over $100

#2523978

WEG RCP-45/400V is a 45 microfarad (MFD) 400-volt AC motor run capacitor. Designed for use with single-phase induction motors, this capacitor provides the necessary phase shift for starting and running operation in applications such as HVAC compressors, pumps, and fans. It features a durable metal can construction with insulated terminals for reliable performance in general-purpose motor circuits.

Brand	WEG
Model	RCP-45/400V

$21.22 Each

Free shipping

#2524173

WEG TBX-E250/280-W22 is a cast iron terminal box designed for W22 severe duty and general purpose motors with E250/280T frame sizes. This replacement conduit box features NPT threaded entries, a gasketed cover for IP55 protection, and is constructed from high-grade FC200 cast iron for superior mechanical strength and corrosion resistance.

Brand	WEG
Model	TBX-E250/280-W22

$149.34 Each

Free Shipping orders over $100

#2524257

WEG TERMBLCK-W22-112/132 is a replacement terminal block assembly designed for W22 severe duty and general purpose three-phase motors with 112 and 132 frame sizes. This genuine WEG part ensures proper electrical connections and maintains the motor's IP55 enclosure rating. It is constructed for durability in industrial environments and is compatible with the W22 product line's cast iron construction and premium efficiency designs.

Brand	WEG
Model	10156583

$65.86 Each

Free shipping

#2840954

WEG 00158ES1B56C-S is a 1.5 HP, 1800 RPM, single-phase, standard efficiency motor with a Totally Enclosed Fan Cooled (TEFC) enclosure. It features a 56C NEMA frame with a C-face mount, operates on 115/208-230V at 60Hz, and is constructed with a rolled steel frame. This general-purpose motor is suitable for applications requiring a durable, single-phase power source with a 1.15 service factor and ball bearing construction.

Brand	WEG
Model	00158ES1B56C-S

$442.46 Each

Free Shipping orders over $100

#2852776

WEG MPW40-3-U040 is a manual motor protector and overload relay from the MPW40 series, featuring an adjustable current range of 32.0 to 40.0 amps. This device provides reliable thermal overload protection for three-phase motors, helping to prevent damage from excessive current draw and locked rotor conditions. It is designed for easy installation and manual reset operation in industrial motor control applications.

Brand	WEG
Model	MPW40-3-U040

$115.25 Each

Free Shipping orders over $100

#2852856

WEG PESW-B25D39AX-R67 is a NEMA 1 enclosed motor starter from the PESW series, designed for across-the-line starting of three-phase motors. It features a 120V AC coil and a thermal overload relay adjustable from 15 to 23 amps, providing reliable motor protection. The enclosure offers protection against dust and incidental contact, suitable for general industrial applications.

Brand	WEG
Model	PESW-B25D39AX-R67

$175.86 Each

Free Shipping orders over $100

#2853112

WEG TBX-IEC225/250-W22 cast iron terminal box designed for IEC metric frame motors in sizes 225 and 250. Features two M50x1.5 conduit openings for electrical connections and is compatible with the W22 product line. This IP55-rated enclosure provides a robust connection point for motor wiring, ensuring protection against dust and water ingress in industrial environments.

Brand	WEG
Model	TBX-IEC225/250-W22

$344.64 Each

Free Shipping orders over $100

#2853129

WEG 00218OT3E56-S is a 2 HP, 1800 RPM, three-phase NEMA Premium efficiency (IE3) open drip proof (ODP) motor. This rolled steel frame motor features a 56 frame, 208-230/460V dual voltage rating, and 60 Hz operation. It is designed for general-purpose applications requiring reliable performance and energy efficiency in industrial environments.

Brand	WEG
Model	00218OT3E56-S

$367.19 Each

Free Shipping orders over $100

#2853143

WEG 00118ET3E56-S NEMA Premium (IE3) TEFC three-phase motor, 1HP, 1800RPM, 56 frame, 230/460V, 60Hz. Rolled steel frame construction with Class F insulation, ball bearings, and 1.15 service factor. Suitable for general-purpose industrial applications.

Brand	WEG
Model	00118ET3E56-S

$375.12 Each

Free Shipping orders over $100

#2853156

WEG .7518OT1B56-S is a NEMA Premium efficiency, single-phase, open drip proof (ODP) motor. This 3/4 HP, 1800 RPM motor features a 56 rolled steel frame, operates on 115/208-230V at 60Hz, and has a 1.15 service factor. It is designed for general-purpose applications requiring reliable performance and energy savings.

Brand	WEG
Model	.7518OT1B56-S

$358.22 Each

Free Shipping orders over $100

#2853246

WEG 00158ES1B56-S 1.5HP 1800RPM 56 frame TEFC single-phase motor with 115/208-230V 60Hz input. This rolled steel frame motor features standard efficiency, NEMA foot mount, and Class F insulation for reliable general purpose industrial applications.

Brand	WEG
Model	00158ES1B56-S

$422.09 Each

Free Shipping orders over $100

#2853879

WEG SSW070365T5SH1RFZ SSW07 series advanced soft starter rated for 365 Amps at 230-575V AC, three-phase power. This reduced voltage starter features a built-in AC1 bypass contactor, closed-loop torque control, and pump control mode to reduce water hammer. It offers programmable digital inputs, relay outputs, and includes a 120VAC auxiliary cooling fan (H1 option) for frame size 4.

Brand	WEG
Model	SSW070365T5SH1RFZ

$3,760.58 Each

Free Shipping orders over $100

#5056896

WEG 00718ES1E215T-W22 is a 7.5 horsepower, 1800 RPM, single-phase motor with a standard efficiency rating. It features a Totally Enclosed Fan Cooled (TEFC) enclosure, a 215T NEMA frame, and a dual voltage rating of 208-230/460V at 60Hz. This W22 product line motor is constructed with a cast iron frame for durability and includes Class F insulation. It is suitable for general-purpose applications requiring a robust, single-phase power source.

Brand	WEG
Model	00718ES1E215T-W22

$1,226.50 Each

Free Shipping orders over $100

#5739500

WEG 00158ET3WAL90LFF-W22 is a 1.5HP, 1800RPM NEMA Premium (IE3) efficiency three-phase motor. This W22 platform motor features a TEFC (Totally Enclosed Fan Cooled) IP55 enclosure, an aluminum frame (90LFF), and a 460/220-240/380-415V dual voltage rating for 50/60Hz operation. It is constructed with Class F insulation, ball bearings, and a 1.15 service factor, suitable for general-purpose industrial applications.

Brand	WEG
Model	00158ET3WAL90LFF-W22

$539.65 Each

Free Shipping orders over $100

#5740891

WEG GPH-STOP PB ASSEMBLY is a pushbutton assembly designed for use with the GPH2 combination soft starter panel. This assembly provides a local emergency stop and control interface for motor starting systems. It integrates with the pre-wired NEMA 1 or NEMA 12 enclosure of the GPH2, which houses an SSW07 soft starter with disconnect and branch circuit protection.

Brand	WEG
Model	GPH-STOP PB ASSEMBLY

$84.18 Each

Free shipping

#6175366

WEG SSW900F0820T6E3B SSW900 series reduced voltage soft starter, 820A rated current, 400-690 V three-phase power supply. Frame F, IP00 enclosure. Features closed-loop torque control, integrated bypass contactor, and detachable graphic keypad with Bluetooth for programming via WEG Programming Suite (WPS).

Brand	WEG
Model	SSW900F0820T6E3B

$12,987.46 Each

Free Shipping orders over $100

#96649528

WEG SSW900E0480T5E4HRB SSW900 series reduced voltage soft starter rated for 480 amps at 220-575V three-phase power. Features built-in AC1 bypass contactor, closed-loop torque control, and detachable graphic keypad with Bluetooth for programming via WEG Programming Suite (WPS). Supports multiple start modes including voltage ramp, current limit, and pump control to reduce mechanical stress and water hammer.

Brand	WEG
Model	SSW900E0480T5E4HRB

$8,633.28 Each

Free Shipping orders over $100