Image for Illustration purposes only. Actual product may vary
$294.74 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $1
Select Quantity
Orders over $500 qualify for a Free Gift
Typically Ships in: 1 day
Returnable: See conditions
Still Deciding?
Add this item to your saved items and easily come back later.
UFH Type - Flange-to-Shaft
A flange-to-shaft configuration, this couples flange mounted equipment to a shaft with all the benefits of Uniflex versatility. The stock flange plate is the same as used on the UF Type. The one-piece UFH Type coupling is similar to the U Type, except that one hub is replaced by a flange plate. Stock flange sizes are shown in the Dimensional Data table below but other sizes can be made to order. As with the other Uniflex styles, this coupling compensates for high degrees of angular and parallel misalignment with very little backlash or windup and is reliable in harsh or severe environments. Regular and short versions are available for each size to accommodate different overall length requirements. For increased versatility, the hub can be modified with a tapered, spline, hex or square bore. The standard hub is furnished with either a pre-drilled pin hole or with a keyway and set screw. Specify when ordering.
Note: The UFH Type coupling does not come with assembly hardware. Assembly hardware must be purchased separately.
Specifications
| Description | UFH50R CPLG 1/2 1/8X1/16KW |
|---|---|
| Hub Style | Regular |
| Type | Flange-to-Shaft |
| Material | Steel |
| Weight | 0.50 lb |
| Color | Gray/Metallic |
| Bore Type | Finished Bore |
| # of Mounting Screws Required | 3 |
Dimensional Data
| Bore Size | 1/2 in |
|---|---|
| Hub Size | UFH50R |
| Set Screw Thread Size (Dimension T) | 1/4-20 |
| Keyway Size (W x D) | 1/8 x 1/16 in |
| Dimension HD | 1.040 in26.42 mm |
| Overall Length | 2.030 in51.56 mm |
| Pin Location (Dimension SL) | 0.310 in |
| Length thru Bore | 0.640 in16.26 mm |
| Min. Bore (Dimensions ID1/ID2) | 0.313 in7.95 mm |
| Max. Bore (Dimensions ID1/ID2) | 0.500 in13.00 mm |
| Dimension BC | 1.500 in38.10 mm |
| Dimension D | 1.880 in47.75 mm |
| Flange Diameter (Dimension FD) | 2.000 in50.80 mm |
| Dimension FL | 0.250 in6.35 mm |
| Mounting Screw Thread Size | 1/4-20 |
| Cubic inches | 8.12000 in³ |
Performance Data
| Operating Temperature Range | -40 to 250 ºF |
|---|---|
| Max. Torque | 82 in·lb |
| Max. Speed | 30000.00 rpm |
| Max. Recommended End Play | 0.035 in0.89 mm |
| Max. Parallel Offset | 0.021 in0.53 mm |
| Wind-Up Angle at Nominal Torque | 1.82 º |
| Wind-Up Angle at Max. Torque | 4.5 º |
| Rated HP at 100 rpm | 0.13 hp |
| # of Set Screws Required | 1 |
Coupling Design
The Uniflex Coupling is an all steel, single piece coupling that solves a variety of application concerns including: high misalignment, space limitations, high temperature, and exceptionally low backlash/windup. The unique flexing center of the Uniflex consists of three opposingly wound square wire springs for forward or reverse operation. Two steel hubs are then brazed to the steel spring pack to create a durable one-piece flexible coupling.
Notes
- Total backlash is approximately 1/3 of windup at maximum torque – consult Lovejoy Engineering for more information.
- OAL & Dimension FL Tolerance +. 12 inch.
- Mounting screws not supplied.
When you get to checkout, you’ll be able to select a free gift! Depending on the cart value, you’ll be shown relevant gifts your order qualifies for.
$500
MRO Hat
MRO Golf Balls
MRO Hi-Vis Vests
MRO Mug
$750
32oz Water Bottle
Throw Blanket
30 piece Hex Set
Telescopic Pick Up
$1,250
Golf Cooler
11-in-1 Screw Driver Set
Gorilla Grip Knee Pad
John Deere Oilskin Hat
$2,500
Igloo 1/2 Gallon Jug
Rechargable Headlamp
Larix Trucker Hat
$5,000
Igloo 10 Gallon Cooler
Igloo Party Bucket Cooler
Klein Tools Speaker
Klein Tools 8-in-1
$7,500
GX-6F Pro Golf Range Finder
Bushnell Outdoorsman Speaker
Jaeger 24px Ratcheting Wrench Set
Aspen Beverage Bucket
Item must be unused.
Item must be in it's original package.
Restocking, shipping and handling fees may applied to any return with this manufacturer.
For more information please consult https://www.mrosupply.com/page/returnwarranty-policy/