Add products to your shopping cart



Image for Illustration purposes only. Actual product may vary

  • Brand:
  • Model: 9C212
  • Condition: NEW
  • SKU: 339802


  • Typically ships in: 1 day
  • Weight: 9.8 lb
  • Contact supplier for technical support on: 888-829-6637

$157.33 Each

Select Quantity

Unit of measure: each

Returnable: See conditions

Payment methods:

Additional Description

Unit Of MeasureEnglish
Material TypeHigh Strength Cast Iron
Coupling Size9
Bore Size Frac in2.500000
Bore Tolerance in+.0005 to +.0020
Capscrew Size3/8-24 NF X 1-1/4
Capscrew Torque Requirement ft lbs55
Component Weight lbs9.8
Component WR2 lbs ft20.2758
DescriptionOur new Sure-Flex Plus EPDM and Neoprene sleeves are best-in-class for coupling performance and value. Their 4-way flexing action absorbs virtually all types of shock, misalignment, and end float. With Sure-Flex couplings, the need for lubrication and maintenance is eliminated.
Family ID2,005
Family NameSure-Flex Plus Coupling
Keyseat Size in5/8 X 5/16
Length Through Bore C Frac in3.000000
Max RPM rpm3,750
Maximum Angular Gap Misalignment0.109 with EPDM/Neoprene Sleeves and 0.028 with Hytrel Sleeves
Maximum Angular Misalignment1 Degree with EPDM/Neoprene Sleeves and 1/4 Degree with Hytrel Sleeves
Maximum Parallel Misalignment in0.025 with EPDM/Neoprene Sleeves and 0.017 with Hytrel Sleeves
Outside Diameter D Frac in7.500000
Product FamilySure-Flex Type C, Clamp Hub
Set Screw Distance S Frac in0.500000
Product Description9C x 2-1/2\" Hub
Setscrew Length Frac in0.500000
Setscrew Size Location5/16-18 UNC, Over keyseat
Setscrew Torque Requirement ft lbs13
SF Hub Diameter H Frac in4.250000
SF Hub Length E Frac in1.970000

Return policy

Disclaimer: The return policy information shown below is merely a copy of the text as stated in TB Wood's Terms and Conditions.


3. Claims for refunds or replacements must be made to the factory. Products may be returned only after written approval and a returned goods authorization number has been received from Customer Service or Application Engineering. Return shipments must be prepaid (Refer to Returned Goods Policy). Final decision about refund or replacement rests solely with TB Wood's Incorporated. 


Disclaimer: The return policy featured below is for distributors only. Also, it is merely a copy of the text from TB Wood's Distributor Policy and Procedures.


Returned Goods
The policy for returning products for defects in workmanship or materials is covered under the “Product Reliability” section.

Distributors and, occasionally, OEMs may want to return products that are overstocked or slow moving. Prior approval and a returned goods authorization number must be obtained from Customer Service or Application Engineering. This number must be referenced on the returned goods shipment. It allows us to identify the contents of the shipment, the Distributor who originated it and the reason for return. Freight must be prepaid. 

Products returned for reasons other than factory authorized stock adjustments must have approval from Customer Service or Application Engineering and a returned goods authorization number. They must be sent by prepaid freight and will be subject to a 15% restocking charge. There will be additional charges as necessary for re-boxing and refurbishing. Returned goods must have been manufactured and/or sold by TB Wood’s Incorporated and must be in salable condition. They will be inspected at the factory and if reconditioning is necessary it will be charged to the Distributor. We reserve the right to reject unsalable products.

No products will be accepted for return or exchange if they are obsolete.


Product's availability

State of California Proposition 65 Product Warning