We never sell your data to third parties
Leeson 096002.00 0.08 HP, 14 RPM single-phase AC gearmotor with L42Y NEMA frame and Totally Enclosed Non-Ventilated enclosure. Operates on 110V at 60/50 Hz with Class F insulation. Features ball bearings (6203 drive end, 6201 opposite drive end) and a 0.750" diameter shaft with 1.625" length.
MODEL 096002.00
$736.00 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable: See conditions
Current
1.3/0.65
Drive End Bearing Size
6203
Drive End Bearing Type
Ball
Duty
Continuous
Enclosure
TENV
Frame
L42Y
Frame Length
5.5
Frequency
60/50
Height
10.88
HP
0.08
Insulation Class
F
KVA code
G
KW
0.06
Length
14.44
Opp. Drive End Bearing Size
6201
Opp. Drive End Bearing Type
Ball
Phase
1
RPM
14
Service factor
1
Shaft Diameter
0.750
Shaft Length
1.625
Shaft type
Parallel
Thermal protection
No Protection
UL
Recognized
Voltage
110
Width
10.44
Regal Beloit Leeson&Reg; 096002.00
UPC: 691720000786 | UNSPSC: 20101617 | GTIN:
Gear Reducers & Gearmotors > Gearmotors > Offset Parallel Shaft Gearmotors > Helical Offset Gearmotors
LEESON® Gear Motor, Parallel Shaft Continuous Duty, Series: PE350, 115/230 VAC, 1.6/0.8 A Full Load Amperage, 0.08 hp, 60 Hz, 1, 14 rpm Maximum, 3/4 in Shaft Dia, 1-5/8 in Shaft Length, Reversible, 330 in-lb, 124:1 Gear Ratio, Permanent Split Capacitor Motor, Ball Bearing, 459 lb Overhung Load, Special Mount, 40 deg C Ambient, Class F Insulation, Totally Enclosed Nonvented (TENV), Die Cast Aluminum Housing, 11.36 in L x 5.57 in H
Features:
- Rugged die cast aluminum gear housing for maximum gear and bearing support
- Precision machined gearing and hardened for maximum load capability
- All gearing designed and rated to AGMA class 9 standards and to withstand momentary shock overload of 200%
- Oversized output bearings for greater overhung load capacity and long life
- High carbon alloy output shaft provides maximum strength and rigidity
- All needle bearing journals are precision ground after heat treating to provide maximum fit and finish
- Heavy duty industrial oil seals keep lubricant in and dirt out
- Gears and bearings are splash lubricated with permanent, heavy duty gear oil
- Run capacitor supplied at no additional cost for single phase designs
- Overhung load capacities shown are at center of output shaft
- These gear motors are designed for mounting at any angle
Specs:
- Series: PE350
- Type: Parallel Shaft Continuous Duty
- Maximum Speed: 14 rpm
- Dimensions: 11.36 in L x 5.57 in H
- Shaft Length: 1-5/8 in
- Voltage Rating: 115/230 VAC
- Mounting Type: Special
- Insulation Type: Class F
- Motor Type: Permanent Split Capacitor
- Rotation Type: Reversible
- Housing Material: Die Cast Aluminum
- Frequency Rating: 60 Hz
- Enclosure Type: Totally Enclosed Nonvented (TENV)
- Temperature Rating: 40 deg C Ambient
- Gear Ratio: 124:1
- Bearing Type: Ball
- Horsepower: 0.08 hp
- Shaft Diameter: 3/4 in
- Phase: 1
- Torque Rating: 330 in-lb
- Full Load Amperage: 1.6/0.8 A
- Overhung Load: 459 lb
Certifications/Standards:
AGMA Class 9 | CSA Certified | UL Listed
Warranty:
1 Year
| Brand | Allen Bradley |
| Model | 440G-T2NBBPH-1L |
| Brand | Baldor |
| Model | 35CB4802A02SP |
| Brand | Alvord-Polk Tool |
| Model | 471-16 |
| Brand | Pyramex |
| Model | RLTS3110NSX3 |
Item must be unused.
Item must be in it's original package.
Restocking, shipping and handling fees may apply to any return with this manufacturer.
For more information please consult https://www.mrosupply.com/page/returnwarranty-policy/