We never sell your data to third parties
Leeson M1125218.00 0.13 HP, 31 RPM DC gearmotor with 30 NEMA frame and Totally Enclosed Non-Ventilated (TENV) enclosure. Operates on 12V DC with Class F insulation, ball bearings, and 0.625" shaft diameter. Designed for low-speed, high-torque applications.
MODEL M1125218.00
$793.00 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable: See conditions
Current
10.6
Drive End Bearing Size
6000
Drive End Bearing Type
Ball
Duty
Continuous
Efficiency
60.4
Enclosure
TENV
Frame
30
Frame Length
4.91
Height
6.69
HP
0.13
Insulation Class
F
KW
0.10
Length
16.5
Opp. Drive End Bearing Size
6000
Opp. Drive End Bearing Type
Ball
RPM
31
Service factor
1
Shaft Diameter
0.625
Shaft Length
1.5
Shaft type
Parallel
Thermal protection
No Protection
UL
Recognized
Voltage
12
Width
7.68
Applications
This gearmotor is designed for mounting at any angle, but motor below the reducer should be avoided to prevent leakage of lubricant into the motor should the motor shaft seal fail. Motor’s stall torque could exceed recommended full load torques. A current limiting device such as an SCR control should be used to prevent damage. This issue is even more critical for low voltage motors, typically no controller is used since motor is connected directly to a battery, so some type of current limit or fusing should be considered. Overhung load capacities shown are at center of output shaft.
Features
- Made in the USA
- Steel frame
- Precision machined in-line steel gears
- First stage steel helical gear followed by spur-type gears
- Performance matched for continuous duty service
- Designed for battery power or can be used with a low voltage controller with form factor up to 1.05
- Lubrication is permanent semi-fluid grease, reducing possibility of leakage
- Output shafts have needle bearings for high load capacities
- Shafts are hardened steel
- Conduit box not included, optional conduit box available
- Footnotes: S, US
When your electric motor fails, it is important to ask the main question: “Do you buy a new one or repair the current one” If you decide to buy a new motor, the first step should be to understand its design and how it works. Then, you should follow the outlined five steps to pick the perfect fit for your appliance.
Read More
#1342549
Brand
Electra/Grove Gear
Model
GRL8260218.00
#1329977
Brand
Electra/Grove Gear
Model
GR8240218.00
#1328628
Brand
Electra/Grove Gear
Model
GR8150218.00
| Brand | Martin Sprocket |
| Model | 80Q16H |
Item must be unused.
Item must be in it's original package.
Restocking, shipping and handling fees may apply to any return with this manufacturer.
For more information please consult https://www.mrosupply.com/page/returnwarranty-policy/