We never sell your data to third parties
Leeson M1125279.00 0.25 HP, 250 RPM DC gearmotor with a 32 NEMA frame and Totally Enclosed Non-Ventilated (TENV) enclosure. Operates on 90V DC at 60 Hz. Permanent magnet DC gearmotor designed for SCR drive control applications. Class F insulation, ball bearings.
MODEL M1125279.00
$683.09 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable: See conditions
Drive End Bearing Size
6201
Drive End Bearing Type
Ball
Efficiency
45.1
Enclosure
TENV
Frame
32
HP
0.25
Insulation Class
F
KW
0.19
Opp. Drive End Bearing Size
6201
Opp. Drive End Bearing Type
Ball
RPM
250
Shaft Diameter
0.625
Shaft Length
1.8
Voltage
90
Leeson WASHGUARD
motors are designed for extended life in applications requiring regular washdown or otherwise wet environments. WASHGUARD motors retard the entrance of water. Extra protection for the motor’s interior prevents rust and corrosion build-up and releases trapped moisture to insure a longer life than possible with a standard motor. For optimum seal life, these right-angle gearmotors have a lubrication breather positioned for horizontal mounting. For other mountings, the breather plug must be reoriented by using a 90 1/8 NPT taper pipe elbow. See page 97 or 106 for diagram. Overhung load capacities shown are at center of the output shaft. The motor’s stall torque exceeds recommended full load torques for the gearboxes. A current limiting device should be used to prevent damage to the gear sets.
Leeson gearbox output shafts are 303 stainless steel. Frame, endshields, armature and interior components protected by enamel and polyester compounds for resistance to moisture, acids, alkalies and oil. Cast conduit box with threaded conduit holes and Nitrile gaskets keep water out. The conduit box cover is made from 304 stainless steel. For any condensation that may accumulate inside the motor, a one-way stainless steel vapor vent is provided. All hardware is stainless steel. Motor painted with epoxy for superior corrosion resistance and protection. Machined fits between the endbells and motor frame are sealed with gaskets. Thru-bolt heads and nuts sealed with fiber washers. O-rings under each threaded brush cover. This worm-type right-angle gearing features hardened, steel worm with bronze worm wheel for long life and quiet operation. Precision machined aluminum housings are used. Gearbox has all ball bearings. The housing is sealed and lubrication is permanent with an oil bath.
| Brand | Dichtomatik |
| Model | 75013492 |
Item must be unused.
Item must be in it's original package.
Restocking, shipping and handling fees may apply to any return with this manufacturer.
For more information please consult https://www.mrosupply.com/page/returnwarranty-policy/