We never sell your data to third parties
Leeson 109065.00 0.25 HP, 1750 RPM DC SCR motor with NS56C NEMA frame and Totally Enclosed Non-Ventilated enclosure. Operates on 90V DC at 60 Hz with 67.5% efficiency and Class F insulation. Permanent magnet DC motor designed for SCR drive control applications.
MODEL 109065.00
$1,053.08 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable: See conditions
Current
3.1
Drive End Bearing Size
6205
Drive End Bearing Type
Ball
Duty
Continuous
Efficiency
67.5
Enclosure
TENV
Frame
NS56C
Frame Length
6.13
Height
10.88
HP
0.25
Hz
60
Insulation Class
F
KW
0.19
Length
19.5
Opp. Drive End Bearing Size
6203
Opp. Drive End Bearing Type
Ball
RPM
1700 - 1800
Service factor
1
Shaft Diameter
0.625
Shaft Length
2.05
Speed [Max]
1750
Thermal protection
No Protection
UL
Recognized
Voltage
90
Width
10.44
Regal Beloit Leeson&Reg; 109065.00
UPC: 691720342909 | UNSPSC: 26101200 | GTIN:
Electric Motors > DC Motors
LEESON® Washguard® DC Motor, 4-Pole Continuous Duty Low Voltage, Special Features: IEC Metric Motors, 0.25 hp, 90 VDC, 3.1 A, 1750 rpm, 1 Speed, Totally Enclosed Nonvented (TENV), NS56C Frame, 0.625 in Dia x 2.05 in L Shaft, Reversible, Service Factor: 1, Ball Bearing, 9 in-lb, C-Face Footed Rigid Base Mount, 40 deg C, Insulation Class: Class F, Stainless Steel, 11.81 in L x 6.5 in W x 9.16 in H
Features:
- Combination of features and low cost make these ideal for many uses
- For use in OEM applications
Specs:
- Type: 4-Pole Continuous Duty Low Voltage
- Material: Stainless Steel
- Dimensions: 11.81 in L x 6.5 in W x 9.16 in H
- Voltage Rating: 90 VDC
- Amperage Rating: 3.1 A
- Power Rating: 0.25 hp
- Mounting Type: C-Face Footed Rigid Base
- Speed: 1750 rpm
- Enclosure Type: Totally Enclosed Nonvented (TENV)
- Temperature Rating: 40 deg C
- Bearing Type: Ball
- Frame: NS56C
- Rotation: Reversible
- Number of Speeds: 1
- Torque Rating: 9 in-lb
- Shaft Size: 0.625 in Dia x 2.05 in L
- Insulation Class: Class F
- Special Features: IEC Metric Motors
- Service Factor: 1
Certifications/Standards:
CSA Certified | UL Listed
Warranty:
1 Year
SKU: 2525293
Good supplier
Very good source for hard to find motors and parts. Great staff and customer service. We will use them again and again.
Read moreSKU: 227315
Motors
I built scissor sharpening Machine. I have used your motors for over 10 years. the motor I used is now obsolete. is their someone there can give some information about the leeson motors.
Read moreSKU: 2525011
Product fine shipping not so much
The Leeson motor was fine and worked as it should. The shipping however had alot to be desired. I know the product was coming from the Allentown warehouse which is about a 35 min drive but still took 4 days to get here and when it arrived the box was trashed. I know this is not your fault and is more of a FedEx issue but something to be aware of.
Read more
When your electric motor fails, it is important to ask the main question: “Do you buy a new one or repair the current one” If you decide to buy a new motor, the first step should be to understand its design and how it works. Then, you should follow the outlined five steps to pick the perfect fit for your appliance.
Read More
#25966
Brand
Baldor
Model
CDP3310
#221451
Brand
Leeson
Model
098002.00
#25946
Brand
Baldor
Model
CD3425
#24252
Brand
Baldor
Model
CDPX3410
#25132
Brand
Baldor
Model
CDPSWD3410
| Brand | MROSupply Fasteners |
| Model | FSTPCK-501180 |
| Brand | Bell & Gossett |
| Model | 112116 |
| Brand | PT Coupling |
| Model | 60543000L2 |
| Brand | Meltric |
| Model | 17-64111-A188-NC |
SKU: 2525293
Good supplier
Very good source for hard to find motors and parts. Great staff and customer service. We will use them again and again.
Read moreSKU: 227315
Motors
I built scissor sharpening Machine. I have used your motors for over 10 years. the motor I used is now obsolete. is their someone there can give some information about the leeson motors.
Read moreSKU: 2525011
Product fine shipping not so much
The Leeson motor was fine and worked as it should. The shipping however had alot to be desired. I know the product was coming from the Allentown warehouse which is about a 35 min drive but still took 4 days to get here and when it arrived the box was trashed. I know this is not your fault and is more of a FedEx issue but something to be aware of.
Read moreItem must be unused.
Item must be in it's original package.
Restocking, shipping and handling fees may apply to any return with this manufacturer.
For more information please consult https://www.mrosupply.com/page/returnwarranty-policy/