Image for Illustration purposes only. Actual product may vary
Marathon GT1310A 182TTFBD6029 3HP 1800RPM 182TC frame totally enclosed fan cooled 3 phase 230/460 volt 60 hertz electric motor This model has 3 horsepower 1800RPM 182TC frame totally enclosed fan cooled 3 phase 230/460 volt 60 hertz electric motor
MODEL GT1310A
Contact supplier for technical support on: 715-675-8090
$955.26 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $1
Select Quantity
Typically Ships in: 1 day
Returnable:No
Enclosure
TEFC
Frame
182TC
HP
3
Hz
60
Phase
3
RPM
1700 - 1800
Voltage
230/460
See all of our 3 HP 182TC Motors
Regal Beloit Marathon GT1310A
UPC: 722856063724 | UNSPSC: 26101112 | GTIN:
Electric Motors > AC Motors
Marathon® AC Motor, 4-Pole Continuous/Inverter Duty Low Voltage, Application Type: General Purpose AC Motors, Special Features: Squirrel Cage Inverter Rated Motors, 3 hp, 230/460 VAC, 8/4 A, 60 Hz, 3 ph, 1762 rpm, 1 Speed, IP43 TEFC Enclosure, 182TC Frame, 1-1/8 in Dia x 2-3/4 in L Extension Shaft, Reversible, Service Factor: 1.15, Deep Groove Ball Bearing, 9 ft-lb Full Load Torque, Round Mount, 40 deg C, Insulation Class: Class F, Rolled Steel, Constant Torque Speed Range: 10:1, Variable Torque Speed Range: 10:1, 15.85 in W x 12.75 in D x 9.69 in H
Features:
- Standard assembly F1, reversible to F2 assembly
Specs:
- Variable Torque Speed Range: 10:1
- Constant Torque Speed Range: 10:1
- Service Factor: 1.15
- Special Features: Squirrel Cage Inverter Rated Motors
- Application Type: General Purpose AC Motors
- Insulation Class: Class F
- Shaft Size: 1-1/8 in Dia x 2-3/4 in L Extension
- Torque Rating: 9 ft-lb Full Load
- Phase: 3 ph
- Horsepower: 3 hp
- Number of Speeds: 1
- Rotation: Reversible
- Frame: 182TC
- Bearing Type: Deep Groove Ball
- Temperature Rating: 40 deg C
- Enclosure Type: IP43 TEFC
- Speed: 1762 rpm
- Frequency Rating: 60 Hz
- Mounting Type: Round
- Amperage Rating: 8/4 A
- Voltage Rating: 230/460 VAC
- Dimensions: 15.85 in W x 12.75 in D x 9.69 in H
- Material: Rolled Steel
- Type: 4-Pole Continuous/Inverter Duty Low Voltage
Packaging:
- Length: 16.53 in
- Width: 14.48 in
- Height: 18.42 in
Certifications/Standards:
CE Certified | CSA Certified | Compliance with EISA2007 Hazardous Duty Division 2, Zone 2, Class I, Groups A,B,C,D Temperature Code T2B | NEMA Premium® Efficiency | UL Listed | NEMA Design Code: B
Warranty:
12 months
SKU: 2270509
Marathon electric motor
motor started and ran as it should have .Very pleased with it ,also MRO supply Fast shipping.Recieved the very nrxt day
Read moreSKU: 2303511
Marathon y543 shipping
The purchase from MRO went smoothly, and it arrived. However, the shipping department needs some remedial training. The box containing the motor was not strapped to the pallet, just set on top of it. As a result, the box rolled off the pallet and was split open. The freight company managed to wrap it up (upside down) with stretch film and put it back on the pallet, but it looked terrible. By a stroke of good fortune the motor was not damaged by this treatment and it looks OK. I can supply photos on request.
Read moreBrand
Baldor
Model
VEM3661T
Brand
Leeson
Model
131503.00
| Brand | IKO Bearing |
| Model | NATA5908 |
| Brand | Dodge |
| Model | 226855 |
| Brand | Dodge |
| Model | 226836 |
| Brand | Dodge |
| Model | 226889 |
| Brand | IKO Bearing |
| Model | NAX6040 |
| Brand | United Abrasives |
| Model | 80430 |
| Brand | United Abrasives |
| Model | 64982 |
| Brand | United Abrasives |
| Model | 58133 |
SKU: 2270509
Marathon electric motor
motor started and ran as it should have .Very pleased with it ,also MRO supply Fast shipping.Recieved the very nrxt day
Read moreSKU: 2303511
Marathon y543 shipping
The purchase from MRO went smoothly, and it arrived. However, the shipping department needs some remedial training. The box containing the motor was not strapped to the pallet, just set on top of it. As a result, the box rolled off the pallet and was split open. The freight company managed to wrap it up (upside down) with stretch film and put it back on the pallet, but it looked terrible. By a stroke of good fortune the motor was not damaged by this treatment and it looks OK. I can supply photos on request.
Read more