MROSupply Has Hundreds Of Brands, Millions Of Products, Including
Image for Illustration purposes only. Actual product may vary
Marathon U1877A 364TTTCD16534 60 1800 TEAO 364TV 3/60/230/460
MODEL 364TTTCD16534
Contact supplier for technical support on: 715-675-8090
$13,993.40 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $1
Select Quantity
Typically Ships in: 1 day
Returnable: See conditions
Ambient temperature (°C)
40
Assembly/box mounting
F1/F2 CAPABLE
CE
Y
Country of Origin
Mexico
CSA
Y
Current
136/68 & 137/68.5 A
Design code
B
Drive end bearing
Ball
Drive end bearing size
6313
Duty
Continuous
Efficiency
95 & 94.2 %
Electrical type
Squirrel Cage Inverter Rated
Enclosure
Totally enclosed air over
Frame
364TV
Frame Material
Cast iron
Frequency
60 & 50 Hz
Insulation class
H
Inverter Load
1
IP code
56
KVA code
G
Motor orientation
Horizontal Or Up Or Down
Mounting
Rigid base
Number of speeds
1
Opp drive end bearing
Ball
Opp drive end bearing size
6213
Output HP
60 & 50 Hp
Output KW
45.0 & 37.0 kW
Packaged height
28.00 IN
Packaged length
38.00 IN
Packaged width
32.00 IN
Phase
3
Poles
4
Power factor
87.2
Resistance main
.104 Ohms
Rotation
Reversible
Service factor
1.15 & 1.15
Shaft diameter
2.375 in
Shaft type
T
Speed
1780 & 1480 rpm
Starting method
Line Or Inverter
Thermal protection
No protection
UL
Recognized
Voltage
230/460 & 190/380 V
- Meets or exceeds NEMA Premium efficiency. Model is in compliance with EISA2007
- IP56, Severe Duty, 100% cast iron construction for rigidity and reduced vibration Internal and external epoxy paint
- Suitable for 20:1 VT and 20:1 CT on VFD, MAX GUARD Class F insulation system 1.15 Service Factor on sinewave, 1.0 Service Factor on Inverter Power
- Rated 60/50 hertz, 190/380 or 380 volt at next lower horsepower
- Extended grease tubes, regreasable in service T-drains provided for effective drainage (Installed in both endshields)
- Suitable for all angle mounting,
- Bearing Current Protection (BCP), Shaft grounding ring (SGRs) installed
- Inpro/Seal quality VBX bearing isolators, Ball bearings
- UL Recognized & CSA certified and CE Mark
SKU: 2270613
Ordered new motor
New motor came within 3 days of ordering thanks for the perfect product and service
Read moreSKU: 2303511
Marathon y543 shipping
The purchase from MRO went smoothly, and it arrived. However, the shipping department needs some remedial training. The box containing the motor was not strapped to the pallet, just set on top of it. As a result, the box rolled off the pallet and was split open. The freight company managed to wrap it up (upside down) with stretch film and put it back on the pallet, but it looked terrible. By a stroke of good fortune the motor was not damaged by this treatment and it looks OK. I can supply photos on request.
Read more
| Brand | Boston Gear |
| Model | SRF718V-15-B5-G |
| Brand | Regal Cutting Tools |
| Model | 092766PS |
| Brand | PEER Bearing |
| Model | 6017-C3 |
| Brand | Dichtomatik |
| Model | 75101327 |
| Brand | Wichita Clutch |
| Model | 30009514 |
| Brand | Toshiba |
| Model | 0304SDJC41M-P |
| Brand | Bondhus |
| Model | 17935 |
| Brand | Bondhus |
| Model | 77050 |
SKU: 2270613
Ordered new motor
New motor came within 3 days of ordering thanks for the perfect product and service
Read moreSKU: 2303511
Marathon y543 shipping
The purchase from MRO went smoothly, and it arrived. However, the shipping department needs some remedial training. The box containing the motor was not strapped to the pallet, just set on top of it. As a result, the box rolled off the pallet and was split open. The freight company managed to wrap it up (upside down) with stretch film and put it back on the pallet, but it looked terrible. By a stroke of good fortune the motor was not damaged by this treatment and it looks OK. I can supply photos on request.
Read more