We never sell your data to third parties
Image for Illustration purposes only. Actual product may vary
Hubbell Wiring HBL2313 LKG CONN 20A 125V L5-20R B/W
MODEL HBL2313
This vendor has a minimum order quantity of 11. Order minimum ($) may be applied. Add desired QTY to cart and proceed to checkout to view minimum
Contact supplier for technical support on: jruvalcaba@hubbell.c
$40.86 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Brand Minimum Order Quantity: 11
Typically Ships in: 1 day
Returnable: See conditions
Amperage
20A
Color
Black/White
Cord dia
360 in-0.930 in
Voltage
125V AC
2P3W, 20A 125V, L5-20R, Black & White Nylon
Specifications
| Product Type | |
|---|---|
| Product Item | Connector Body |
| Wiring Scheme | 2-Pole, 3-Wire Grounding |
| Amperage | 20A |
| Voltage | 125V AC |
| NEMA Configuration | L5-20R |
| Item Style | Insulgrip |
| Device Color | Black/White |
| Cord Dia. | .360"-.930" (9-24) |
| Terminal Retainer Material | Clear polycarbonate |
| Housing Material | Black nylon |
| Cord Clamp Material | Natural (white) nylon |
| Terminal Clamp Material | .08" (2) steel-nickel plated |
| Terminal Screw Material | #10-32 Brass (white finish on neutral screw when used) Multi-drive |
| Ground Screw Material | #10-32 Brass (green finish) Multi-drive |
| Cord Clamp Screw Material | Steel, zinc plated Multi-drive |
| Body Holding Screw Material | Steel, zinc plated Multi-drive |
| Body Contact Carrier Material | Natural White Nylon |
| Contact Spring Material | Brass |
| Spring Binding Plate Material | Brass |
| Ground Contact Material | .031" (.8) Brass |
| Ratings | Molded In or Stamped On |
| Catalog No | Permanently ink marked on product |
| Dielectric Voltage Withstand | 2, 000V minimum |
| Current Interrupting | Certified for current interrupting at full rated current |
| Temperature Rise | Max 30C temperature rise at full rated current after 50 cycles of overload at 150% of rated current at a power factor of.75. |
| Cord Accommodation | Round portable service cords of diameters commensurate with the device rating as defined in UL Standard 62, CSA C22.2 No.49. |
| Terminal Accommodation | 20A #12 AWG |
| Terminal Identification | Terminals identified in accordance with UL 498 (X, Y, Z, White, Green) |
| Flammability | HB or better per UL 94 or CSA 22.2 No.0.6 |
| Operating Temperatures | Maximum Continuous 75 C Minimum -40 C (w/o impact) |
| Moisture Resistance | IP20 |
| Listings | FED SPEC UL/CSA |
| UPC Number | 783585037745 |
| Weight in LBs | 0.3 |
SKU: 5020985
Hubble floor socket
Nice low profile. Access door is tight...needs a small tool to open. Installation was easy
Read moreSKU: 1100550
Not bad
Unfortunately the mounting holes for this receptacle did not match the Arlington DBVS2C-1 Low Profile IN BOX Electrical Box. Otherwise it is a nice product.
Read moreSKU: 5017805
Helpful and good service
Even when I mistakenly ordered the incorrect product, they quickly organised the RMA and paperwork so I could ship right back. Found them very helpful
Read more
#1101284
Brand
Hubbell Wiring
Model
SS720
#1020392
Brand
Hubbell Wiring
Model
HBL2311
#1025303
Brand
Hubbell Wiring
Model
HBL7425WOA
#5971750
Brand
Hubbell Wiring
Model
HBL2310M7
#1020432
Brand
Hubbell Wiring
Model
HBL2313
| Brand | NTN Bearing |
| Model | 42584 |
| Brand | LS Electric |
| Model | 02050073UL |
| Brand | Royal Products |
| Model | 53700 |
| Brand | Hubbell Wiring |
| Model | CRF15GRY |
| Brand | FK Bearing |
| Model | RSM4Y |
| Brand | NSK Bearings |
| Model | RS2020A20 |
| Brand | Hammond Power Solutions |
| Model | SG3A0075DK |
| Brand | Royal Products |
| Model | 20103 |
SKU: 5020985
Hubble floor socket
Nice low profile. Access door is tight...needs a small tool to open. Installation was easy
Read moreSKU: 1100550
Not bad
Unfortunately the mounting holes for this receptacle did not match the Arlington DBVS2C-1 Low Profile IN BOX Electrical Box. Otherwise it is a nice product.
Read moreSKU: 5017805
Helpful and good service
Even when I mistakenly ordered the incorrect product, they quickly organised the RMA and paperwork so I could ship right back. Found them very helpful
Read moreItem must be unused.
Item must be in it's original package.
Restocking, shipping and handling fees may apply to any return with this manufacturer.
For more information please consult https://www.mrosupply.com/page/returnwarranty-policy/