We never sell your data to third parties
S2017 Degree: 14-1/2 Steel Spur Gear
MODEL S2017
Contact supplier for technical support on: 323-728-8117
$40.78 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Returnable: See conditions
Brand
Baldor
Model
KBM3458
Brand
Baldor
Model
EM3555
Brand
Baldor
Model
EM3550T
Brand
Baldor
Model
EM3550
Material
Steel
Number Of Teeth
17
Outside Dia
0.950"
| Material | Steel | Face Width | 0.375 in. |
|---|---|---|---|
| Diametral Pitch | 20 | Bore Type | Reborable |
| Pressure Angle | 14.500 deg. | Set Screw Size | NONE in. |
| Number of Teeth | 17 | Set Screw Location | None |
| Pitch Diameter | 0.850 in. | Hub Outside Diameter | 0.703 in. |
| Outside Diameter | 0.950 in. | Hub Projection | 0.375 in. |
| Storage Dimension Length | 0.950 in. | Weight | 0.08 lbs. |
|---|---|---|---|
| Storage Dimension Width | 0.950 in. | Individually Packaged | No |
| Storage Dimension Height | 0.750 in. |
No questions match your search.
How do I read a Martin spur gear part number such as TS324BS 1? This product
The prefix gives material and pressure angle: S is steel at 14-1/2 degrees, TS steel at 20 degrees, C cast iron at 14-1/2 degrees, TC cast iron at 20 degrees, and NM non-metallic. Next comes the diametral pitch, then the tooth count, so S1236 is steel, 12 DP, 36 teeth. An H after the tooth count means hardened teeth. BS followed by a size means bored to size with keyway and setscrew, for example S612BS 1 has a 1" bore. Without BS the gear has a plain stock bore for reboring. TS324BS 1 is therefore a steel, 20 degree, 3 DP, 24 tooth gear with a 1" bore.
Will a Martin 14-1/2 degree spur gear mesh with a 20 degree gear? This product
No. Martin's catalog states that 14-1/2 degree pressure angle gears will not operate with 20 degree gears, even at the same diametral pitch, so both gears in a pair must share pitch and pressure angle. In Martin part numbers, 20 degree gears carry a T prefix (TS for steel, TC for cast iron), while S and C gears are 14-1/2 degrees. When replacing one gear of a pair, read the prefix on the surviving gear before ordering. Our Martin range covers both: about 640 S and C gears at 14-1/2 degrees and about 300 TS and TC gears at 20 degrees.
Should I choose a Martin steel or cast iron spur gear? This product
Martin steel stock spur gears come plain without hubs (Type A), plain with hubs (Type B), or with a web or web with lightening holes (Types B1 and B2). Cast iron gears come plain with hubs, web, web with lightening holes, or spoke style (Type B3), and are cast with a larger hub for extra strength and larger bores. Steel carries more power at the same size: in Martin's 14-1/2 degree ratings, a 3 DP, 24 tooth gear at 50 RPM is rated 16.32 hp in steel against 9.67 hp in cast iron. Check Martin's horsepower tables for your pitch and speed.
Can I rebore a Martin spur gear, and what is the largest bore it will take? This product
Most Martin stock spur gears are supplied with a plain stock bore for reboring; our listings show this as Reborable. Each catalog line gives the stock bore and a recommended maximum bore that leaves room for a standard keyway and setscrew. For example, Martin lists S324 with a 1-7/16" stock bore and a 3-1/4" maximum. If you want a finished bore instead, choose the BS version: S612BS 1, for instance, is listed with a 1" bore, a 1/4 x 1/8 keyway and a 1/4-20 setscrew. Bored to size gears show as Bored To Size on our listings.
How do I identify a worn, unmarked spur gear to find the Martin replacement? This product
Count the teeth and measure the outside diameter, then use Martin's formula DP = (N + 2) / OD. Martin's own example: a 46 tooth gear with a 6" OD is 8 DP. Next confirm the pressure angle (14-1/2 or 20 degrees), face width, hub diameter and projection, bore, keyway and setscrews, and whether the teeth are hardened. Pitch, tooth count and pressure angle give you the matching S, TS, C or TC part number. If no stock gear fits, Martin's quote checklist asks for those same details plus material and gear style for a made-to-order gear.
Works great
Verified · SKU 262256Works perfect and made my gokart way faster Read more
Great service and selection
Verified · SKU 264057I was very pleased to find this on the shelf. The price was fair, and the delivery was prompt. I will do business again with MRO Read more
Plate gear
Verified · SKU 261211Just what I ordered at a reasonable price. Thank you, Dallas Read more
Martin c5-20t-19-09
Verified · SKU 2925122Quality product. Fast shipping! Read more
Brand
Bando
Model
800-5M-15
Brand
Leeson
Model
Y362
Brand
Dodge
Model
23QZ05R56
Brand
Gates Rubber
Model
3MR-30S-06
Brand
Dixon
Model
HGV250F-D
Brand
Dixon
Model
FSGV550F
Brand
Dixon
Model
FSGV450F
Item must be unused.
Item must be in it's original package.
Restocking, shipping and handling fees may apply to any return with this manufacturer.
For more information please consult https://www.mrosupply.com/page/returnwarranty-policy/